Marlin 20 Pump - Need a bolt or a welder

[adbm3]

This part isn't easy to find or reasonably priced, I know. Anyway, the small cartridge feeder lip on the front of the bolt found itself snapped off by a previous bubba. If you have a bolt you'd like to let go of please let me know. Otherwise, please recommend someone who knows what they are doing with a TIG welder as I have the bit that broke off. Please note this is a model 20 - not a 20A, 20S, ad nauseum.

Thanks

 

[tac-40]

Found one for $250, Model 20 breech block. If you post pictures of your and where it is broken, you might get somebody willing to do a weld buildup if possible. Sight unseen makes it a little harder to say if it is doable.

Marlin Model 20 Stripped Breech Bolt | Factory Original

You are considering a vintage Factory Original Marlin Model 20 Stripped Breech Bolt. It's in good shape with light wear.

oldarmsofidaho.com

 

[adbm3]

Good points. However, I think I will pursue cheaper options. I know of this vendor. I've found that some of these bolts are either wildly overpriced, like this one, or less than $100. Also, not all these bolts are the same. There were several models in this line and most people misidentify which bolt belongs to which model. There are minor variations in the parts. Anyway, I've included pix of the broken one I have. I've placed the broken piece next to the area from where it snapped off. It's a very small break but it's at a super critical spot. Hope that helps someone.

 

[fal762]

Th is on Ebay; https://www.ebay.com/itm/195764688438?hash=item2d947c1636:g:kTAAAOSwxeFkTpfv&amdata=enc:AQAIAAAA4CQZpKSyNHbGqeRaudsfKmAWXWsVODgyweurhey5aPwghvtZNj9jPiBvyZ3kISBt501cf3UhVaOLhsBVfPCsnLuL/z2XabWRtDomPMVvxgQ0XMrDtqy6wjbIenLXXBOKdiro+MW/oSTnLwGj56ynNrS+y+ns0z963vlXiOtl8MxjeNzBsWBXNI5Y6x3DD61vYiNwwuI3RztxvAZYag92wLMo+KLOVGrdl+Kj75pP8e+Kb+kaGNwWJH5ipaL9R3VQ4FD8SSg9JdqPdys1VsVdm4t8PMDpyH+/KexddL51SOjG|tkp:Bk9SR-yTnJSGYg
May also want to check over on Marlinowners.com

 

[adbm3]

Thanks. Way ahead of you on those ideas.