FS/ Trade: As New Forged Imbel Inch cut L1A1 receiver $630 1 more day

A place for our members to finish any pending transactions etc..
Post Reply
STGguy
Posts: 46
Joined: Sat Jul 11, 2020 12:49 am

FS/ Trade: As New Forged Imbel Inch cut L1A1 receiver $630 1 more day

Post by STGguy »

FS/ Trade: (For a very nice '80-'88 Brit unmolested, 21", Cold Hammer Forged BBL in ex. condition, low round count+$$$)or inexpensive unmolested 21” Imbel NBC BBL, no Gas Block needed , exterior condition can be fair / good - The cheaper the better - BUT need VG bore for Izzy LB build on PSA clearance Izzy LB kit.

Inch Cut Imbel Forged Upper Receiver.. All ready to go on your new L1A1 Build!
Excellent Condition- see pics. Takes Metric Mags & has folding charging handle inch cut and cuts for inch top cover tabs.

I ended up with this from a solid member here when I began to collect what I needed for my first Brit L1A1 build.

After I got this, I stumbled on a complete CAI rifle with an identical but with a more well used Inch Cut Imbel upper.
ARS/ Mark refinishes them in this process, so, I decided to part with this one and send the other more used one to him.
All forum rules apply, first Unconditional "I'll Take it " here is the proud new owner! Time Stamp rules followed by IM or preferably- email: bobbarto1@gmail.com or text: 704.604.8788 to let me know. Not currently cross posted. Thought I'd offer it to the Community here first less the GB commission adder on price.

$645 ...$630 NOW + $20 shipping/ insurance/ tracking. Prefer electronic payment: paypal F&F NO Comments due to their anti gun sentiments, Zelle, etc. If not able to do either of those, anything works including personal check if you don' t mind me holding it until it clears. Bank of America account holders ll clear faster just fyi.

PICS:- Sorry for the links....
https://i.ibb.co/pb0yn7Z/2.jpg
https://i.ibb.co/3SsnRph/4.jpg
https://i.ibb.co/2q8y9np/6.jpg
https://i.ibb.co/gjrTRqH/IMG-2813.jpg
https://i.ibb.co/64FLyMT/IMG-2816.jpg
Pic of the Imbel "Widow's Peak" VS the CAI made ones that have a "Unibrow":
https://i.ibb.co/x7NLCb4/IMG-2864.jpg
Last edited by STGguy on Fri Aug 07, 2020 11:00 pm, edited 6 times in total.

User avatar
nalioth
Posts: 587
Joined: Thu Jul 09, 2020 2:30 pm

Re: FS/ Trade: Beautiful Forged Imbel Inch cut L1A1 receiver $645

Post by nalioth »

STGguy wrote:
Sun Aug 02, 2020 4:35 pm
FS/ Trade: (For Hythe Rear Site in excellent condition + $$$; or very nice '80-'88 Brit unmolested, 21", Cold Hammer Forged BBL in ex. condition, low round count+$$$)

Very nice Inch Cut Imbel Forged Upper Receiver.. All ready to go on your new L1A1 Build! Excellent Condition- see pics. Takes Metric Mags but has folding charging handle inch cut and cuts for top cover tabs already.

I ended up with this from a solid member here when I began my quest to build my first Brit L1A1. After I got this and just as I was about to send it off to Mark at ARS to "inchize" Brit cut and engrave it, I stumbled on a complete CAI rifle with an identical but much more well used Inch Cut Imbel upper. Since Mark refinishes them in that process, I decided to part with this one and send the other one to him.

I realize this ad will get taken down soon when the other site opens up, no prob. if its not on its way to the new owner by then, I'll just repost...no problem...

Anyways, all forum rules apply, first Unconditional "I'll Take it " here is the proud new owner! Time Stamp rules followed by IM or preferably- email: bobbarto1@gmail.com or text: 704.604.8788 to let me know. Not currently cross posted. Thought I'd offer it to the Community here first less the GB commission adder on price.

$645 + $20 shipping/ insurance/ tracking. Prefer electronic payment: paypal F&F NO Comments due to their anti gun sentiments, Zelle, etc. If not able to do either of those, anything works including personal check if you don' t mind me holding it until it clears. Bank of America account holders ll clear faster just fyi.

PICS:- Sorry for the links, not sure how to post w/ out them and meet the pic size requirement.
https://i.ibb.co/pb0yn7Z/2.jpg
https://i.ibb.co/3SsnRph/4.jpg
https://i.ibb.co/2q8y9np/6.jpg
https://i.ibb.co/gjrTRqH/IMG-2813.jpg
https://i.ibb.co/64FLyMT/IMG-2816.jpg
There is no pic size requirement here on the lifeboat.

When embedded, images are automajically resized:

Image

STGguy
Posts: 46
Joined: Sat Jul 11, 2020 12:49 am

Re: FS/ Trade: Beautiful Forged Imbel Inch cut L1A1 receiver $645

Post by STGguy »

Ohhh must have been the new one I "accidently ended up on..." that had a Pixel size limit when I tried to post stuff??? "Art did it" though Jen ;)
Last edited by STGguy on Fri Aug 07, 2020 9:59 pm, edited 2 times in total.

Thorack
Posts: 2
Joined: Mon Aug 03, 2020 3:31 pm

Re: FS/ Trade: Beautiful Forged Imbel Inch cut L1A1 receiver $645

Post by Thorack »

Hi,

I have a NOS Aussie Match barrel. Its one of the last from Lithgow. Its a Black Mountain (BCF) hammer forged, S AGA marked Match Barrel with Chromed Chamber. I would consider trading trading it for your receiver. Contact me if interested.

theronballard@yahoo.com

Thanks
Thorack

STGguy
Posts: 46
Joined: Sat Jul 11, 2020 12:49 am

Re: FS/ Trade: Beautiful Forged Imbel Inch cut L1A1 receiver $645

Post by STGguy »

I had one person contact me to ask about the difference in various Imbel/ Brazil Proofs on the upper the different Imbels that CAI used.

Here is a pic of both the Imbel's inch cut uppers that I ended up with for this build as was stated in the OP above, both from CAI Brit's. Top one is the one I'm sending off to ARS- only because it appears more used- brass kisses,etc- than this one that I am offering for sale. I told him I'd sell it for the same price if he wanted that one. It doesn't matter to me which one I use.

Imbel sent Gear Logo and NGL's to CAI for these builds as well as Argy T3's (Their Serial Numbers began with a "C") and their other less desirable/ less valuable ones w/ the "Unibrow".

Art (Chief) also let me know that he has 2 identical ones to the one I'm offering for sale here and that any CAI non-Imbel one would also have "Made in the USA" stamped on them along with the "UNIBROW" feed ramp vs The "Imbel- Widows Peak" as seen in pic , etc. Its just the particular batch of Imbels that CAI received that determines the exact proofs on them.

Also, Any new "smudges " seen are from finger prints and any fibers in these close up pics from the cloths they are wrapped and stored in after initial pics....

Pic:
https://i.ibb.co/Jtr9wbx/IMG-2845.jpg
Last edited by STGguy on Wed Aug 05, 2020 2:27 pm, edited 4 times in total.

STGguy
Posts: 46
Joined: Sat Jul 11, 2020 12:49 am

Re: FS/ Trade: Beautiful Forged Imbel Inch cut L1A1 receiver $645

Post by STGguy »

Pic of the Imbel "Widow's Peak" VS the CAI made ones that have a "Unibrow":
https://i.ibb.co/x7NLCb4/IMG-2864.jpg

Post Reply