View Single Post
Old February 15, 2018, 02:09   #14
NFADLR's Avatar
FALaholic #: 7480
Join Date: Sep 2002
Location: Location thats the question \_(ツ)_/
Posts: 5,684
As I recall the DSA FAL came into California with the e block welded up that wouldn't let the mag release open.

The e block was held in place with the two solid pins
the lawyers were OK with that.

It was many years ago but it did show that there was nothing permanent about the way the mfg (DSA) held in the magazine.
NFADLR is online now   Reply With Quote