View Single Post
Old March 26, 2020, 18:20   #10
acgeorge
Registered
 
FALaholic #: 3240
Join Date: May 2001
Location: Granger, IN
Posts: 16
Quote:
Originally Posted by gunplumber View Post
you can, it's not going to hurt anything, but I suspect you are reaching the bottom of the threads on the barrel and not the muzzle face.
Yup! You are correct. Only had .020" shim stock, did not change my position. Definitely bottoming on threads. I did learn something, the .020 shim with the .157 washer moved me approx. 190 deg, just 10 deg shy of BDC. With the .161 washer, I ended up at approx. 3:30 o'clock.

Seems I need approx. .177" washer, so either #8A or #9.
__________________
A.George
acgeorge.geo@yahoo.com

Last edited by acgeorge; March 26, 2020 at 19:56.
acgeorge is offline   Reply With Quote