PDA

View Full Version : what glue will work in freezer


johnsopi
April 27, 2008, 16:53
What glue will work in a freezer I tried a 2 part epoxy. I need to stick metel to plasic for ice maker delivery screw.

renaissance_warrior
April 27, 2008, 17:21
I'd get a piece of pvc pipe, cut it longways in half, screw the metal part to it, and use some pvc glue to attach. You might want to get a flat piece as well as a mounting plate to eliminate the torque effect of the ice screw. HTH :beer :

Mason
April 27, 2008, 21:33
Unibond Repair Extreme Glue. Temperature range -50C to 120C.

[Link Removed at the request of Euroffice - Jen]

xdshooter
April 27, 2008, 21:45
Try a cyanopoxy. www.coolchem.com.

The two part system uses a glue like a superglue, but is catalyzed with an accelerator.

V guy
April 28, 2008, 09:40
I just read a thread on removing a garand handguard that had been epoxied to the stock ferrule.....the advice was to PUT it in the freezer...it worked...the joint shrunk and the parts came apart...the eopxy turned to a crumbly putty consistency...

johnsopi
April 28, 2008, 10:26
I'll look at the local hardware store and see what they have.

Muggzy
April 28, 2008, 11:59
hot glue gun and hot glue


been there....done that