|
January 26, 2004, 07:59
|
#1 |
|
Registered
FALaholic #: 6741 Join Date: Jun 2002
Location: North Dakota
Posts: 140
|
Need AK threading advice
I am at work and I decided it might be nice to thread my SAR1 rifle to accept the slant brake. I am well aware about the legal side of this one and what is requires, but I would like to know if there is enough meat on the end of the barrel to thread it (14x1 LH)? I guess I could measure it myself, but like I said I am at work and do not have the stuff with me at this moment. Any help one could provide will be greatly appreciated.
|
|
|
|
January 26, 2004, 13:56
|
#2 |
|
Registered
FALaholic #: 529 Join Date: Jul 2000
Location: Chapel Hill, TN US
Posts: 2,160
|
I threaded mine and attached an AK74 brake, and did the same for a buddies with the slant brake. Plenty of material there, just be sure to permanantly attach it....until Sept. at least.
Also if you happen to have a left handed FAL barrel threading die (9/16 X 24L IIRC) it is interchangeable with the metric 14X1L.
__________________
Alright you primitive screwheads, listen up. See this? THIS is my BOOMSTICK! |
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
