TOOLS AND HARDWARE

gunsap · May 13, 2003, 23:15

Can anyone give me the rundown on what tools and hardware I will need to put my g1 together? About what kind of $$$ I am looking @ here? I realy want to get this BADBOY up and shoot'n!!!! thanks for the help and input!

**bykerhd** · May 14, 2003, 06:12

There are people here who make their own receiver wrenches and then have at the barrel with an open end wrench. The minimalist approach.
Personal preference includes a receiver wrench, barrel vise, Wadman's barrel shoulder tool, pin gauges and one of the new barrel timing tools from Pa. Patriot.
Depends on how many you plan to build and how much hassle you can deal with.
There are a lot of us around with the tools. Somebody may be close enough to you to give you a hand.

Rebel X · May 14, 2003, 06:12

6" Vice ~ $50.00 (Harbor Frieght Tools)
Reciever Wrench ~ 50.00
Go and No Go gages PLUS Pins ~ $65.00
1-1/16" or 27 mm Wrench ~~ 20.00

Misc tools: punches... cold chisel.. dremel tool ....
Mapp Gas Torch..

Good Luck!!

M1Tanker · May 14, 2003, 06:51

You don't need all the tools listed in this link, but it has a list plus explanations.

http://www.cruffler.com/trivia-April01.html

Chris

cducati · May 14, 2003, 06:53

--Go and No Go gages PLUS Pins ~ $65.00

Where are you getting these?

Hunterdon · May 14, 2003, 07:04

$70.00 at Gun things for both the gages & pinshttp://gunthings.com/faltools.htm

**bykerhd** · May 14, 2003, 09:50

Sorry, I forgot the go- & no-go gauges as listed by everybody else. BUT, you should also have a set of pin-punches, gunsmithing screwdrivers(Craftsman $1.99 screwdriver = buggered screws), FAL buttstock tool, extractor tool and a gas nut wrench. The Austrian stg tool available from several vendors will remove/tighten bipod castle nuts as well as remove gas nuts.
You can do it on the cheap, but it is more difficult to have a good looking, proper functioning rifle when you are done. But, it can be done. Or, so we are told.

cducati · May 14, 2003, 18:36

Thanks!
that's a great price for both of these tools.

May 13, 2003, 23:15	#1
gunsap Registered FALaholic #: 6496 Join Date: May 2002 Location: Nv. Posts: 189	TOOLS AND HARDWARE Can anyone give me the rundown on what tools and hardware I will need to put my g1 together? About what kind of $$$ I am looking @ here? I realy want to get this BADBOY up and shoot'n!!!! thanks for the help and input!

May 14, 2003, 06:51	#4
M1Tanker Registered FALaholic #: 8346 Join Date: Dec 2002 Location: Ft. Hood, TX Posts: 451	You don't need all the tools listed in this link, but it has a list plus explanations. http://www.cruffler.com/trivia-April01.html Chris __________________ Armor: We don't make National Policy...we just execute the last 4000 meters.

May 14, 2003, 06:53	#5
cducati Registered FALaholic #: 9797 Join Date: Mar 2003 Location: Indianapolis, IN Posts: 41	--Go and No Go gages PLUS Pins ~ $65.00 Where are you getting these? __________________ nothing flys like a duc

May 14, 2003, 18:36	#8
cducati Registered FALaholic #: 9797 Join Date: Mar 2003 Location: Indianapolis, IN Posts: 41	Thanks! that's a great price for both of these tools. __________________ nothing flys like a duc

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

May 14, 2003, 06:12	#2
bykerhd Dinosaur Bronze Contributor FALaholic #: 2798 Join Date: Mar 2001 Location: Burlington Vermont area Posts: 13,262	There are people here who make their own receiver wrenches and then have at the barrel with an open end wrench. The minimalist approach. Personal preference includes a receiver wrench, barrel vise, Wadman's barrel shoulder tool, pin gauges and one of the new barrel timing tools from Pa. Patriot. Depends on how many you plan to build and how much hassle you can deal with. There are a lot of us around with the tools. Somebody may be close enough to you to give you a hand.

May 14, 2003, 06:12	#3
Rebel X Registered FALaholic #: 1750 Join Date: Dec 2000 Posts: 176	6" Vice ~ $50.00 (Harbor Frieght Tools) Reciever Wrench ~ 50.00 Go and No Go gages PLUS Pins ~ $65.00 1-1/16" or 27 mm Wrench ~~ 20.00 Misc tools: punches... cold chisel.. dremel tool .... Mapp Gas Torch.. Good Luck!!

May 14, 2003, 07:04	#6
Hunterdon Registered FALaholic #: 9498 Join Date: Feb 2003 Location: Michigan Posts: 17	$70.00 at Gun things for both the gages & pinshttp://gunthings.com/faltools.htm

May 14, 2003, 09:50	#7
bykerhd Dinosaur Bronze Contributor FALaholic #: 2798 Join Date: Mar 2001 Location: Burlington Vermont area Posts: 13,262	Sorry, I forgot the go- & no-go gauges as listed by everybody else. BUT, you should also have a set of pin-punches, gunsmithing screwdrivers(Craftsman $1.99 screwdriver = buggered screws), FAL buttstock tool, extractor tool and a gas nut wrench. The Austrian stg tool available from several vendors will remove/tighten bipod castle nuts as well as remove gas nuts. You can do it on the cheap, but it is more difficult to have a good looking, proper functioning rifle when you are done. But, it can be done. Or, so we are told.