Handguard interchangability

Primative · January 26, 2003, 08:37

Will metric handguards fit an inch barrel/front end? Are the handguard rings different?

**EMDII** · January 26, 2003, 08:44

Primative- you HAVE been assimilated. Therefor:
- You WILL go HERE, to the Eureka thread in FAQs FORUM.
- You WILL bookmark the "Eureka" thread for reference
- You will scroll down to the search mask entitled "INTERCHANGEABILITY" whence you will find ALL these answers
- You SHOULD contribute any truthes you find to be self-evident after you use one of those FAQ answers.

Short answer, BTW-
Except for T-48 and ISraeli HGs, all interchange w/o much difficulty. Israelis use different rings on the HB, and some stand-off spacers on the gas tube not found on Imperial or Metric rifles.

January 26, 2003, 08:37	#1
Primative Registered FALaholic #: 5708 Join Date: Feb 2002 Location: Southeast Posts: 128	Handguard interchangability Will metric handguards fit an inch barrel/front end? Are the handguard rings different?

January 26, 2003, 08:44	#2
EMDII Evil Moderator Silver Contributor FALaholic #: 6 Join Date: Jul 2000 Location: Kennesaw, GA Posts: 13,971	Primative- you HAVE been assimilated. Therefor: - You WILL go HERE, to the Eureka thread in FAQs FORUM. - You WILL bookmark the "Eureka" thread for reference - You will scroll down to the search mask entitled "INTERCHANGEABILITY" whence you will find ALL these answers - You SHOULD contribute any truthes you find to be self-evident after you use one of those FAQ answers. Short answer, BTW- Except for T-48 and ISraeli HGs, all interchange w/o much difficulty. Israelis use different rings on the HB, and some stand-off spacers on the gas tube not found on Imperial or Metric rifles. __________________ "The Spartans do not enquire how many enemy there are. The SPartans merely enquire WHERE they are." E.M. (Ted) Dannemiller II 1*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode