Argie extractor?

Fenris · December 11, 2011, 08:21

I just got my Sarco Argie kit, and I noticed that the extractor is
different from what I'm familiar with. I did a search and wasn't
able to find anything. My DSA extractor tool doesn't seem like it
would work on these. Anyone have any advice or a link on how
to remove the extractor?

Fenris · December 11, 2011, 12:21

I did a regular Google search and found that it is a one
piece extractor, also found how to remove it but haven't
tried it yet.

**Hebrew Battle Rifle** · December 11, 2011, 15:26

I used a flat head screw driver. I really do not understand how I got it out, but I did. IIRC, I put the fat under the lip as if it were a case rim and applied pressure. It was actually disconcerting how easily it came out.

gmtech485 · December 24, 2011, 09:07

Just what HBR said, much easier to take down than the two price and no special tools required

December 11, 2011, 08:21	#1
Fenris Registered Contributor FALaholic #: 2319 Join Date: Jan 2001 Location: Ellensburg,WA. Posts: 64	Argie extractor? I just got my Sarco Argie kit, and I noticed that the extractor is different from what I'm familiar with. I did a search and wasn't able to find anything. My DSA extractor tool doesn't seem like it would work on these. Anyone have any advice or a link on how to remove the extractor?

December 11, 2011, 15:26	#3
Hebrew Battle Rifle Horses Ass Bronze Contributor FALaholic #: 5777 Join Date: Mar 2002 Location: Arkansas Posts: 6,812	I used a flat head screw driver. I really do not understand how I got it out, but I did. IIRC, I put the fat under the lip as if it were a case rim and applied pressure. It was actually disconcerting how easily it came out. __________________ THANK YOU JESUS

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

December 11, 2011, 12:21	#2
Fenris Registered Contributor FALaholic #: 2319 Join Date: Jan 2001 Location: Ellensburg,WA. Posts: 64	I did a regular Google search and found that it is a one piece extractor, also found how to remove it but haven't tried it yet.

December 24, 2011, 09:07	#4
gmtech485 Registered FALaholic #: 40930 Join Date: Dec 2008 Location: Tacoma Washington Posts: 488	Just what HBR said, much easier to take down than the two price and no special tools required