CZ SCOUT .22

phillip · May 29, 2008, 17:47

I got a CZ 452ZKM SCOUT youth rifle that the safety is a bitch to turn off and on. Its bareable for grown ups but the crumb snatchers are waving the muzzle when operating it. When I bought it They said itll loosen up with use, It sounded good to me, At the time I didnt have a problem with them. That was several years ago, And it aint happened yet. Any having this problem out of theirs? Think I could stone the lever or should I leave this to a smith?

phillip · May 30, 2008, 11:40

Nobodys got one of these?

JT · May 30, 2008, 16:59

I have an American CZ, and a FS model. Both safties are very easy to operate, but positive. How old are the crumb snatchers? I have never studied on how the safety works. If it is a detent and coil spring, maybe a coil or two can be cut off. But first I would check that the safety pivots freely on the pin, and it is not bent.

phillip · May 30, 2008, 19:23

The crumb snatchers are 8,10,34,38, and 73 . Ok, Its not just the crumb Snatchers that have fun with it

. Heres a link to the schematic.

http://stevespages.com/ipb-czech-452.html

Actually I hadn't looked at this link before now, It looks simple enough, Ill give it a look see tomorrow.

May 29, 2008, 17:47	#1
phillip Banned again FALaholic #: 29433 Join Date: May 2007 Location: Keithville,La. Posts: 2,624	CZ SCOUT .22 I got a CZ 452ZKM SCOUT youth rifle that the safety is a bitch to turn off and on. Its bareable for grown ups but the crumb snatchers are waving the muzzle when operating it. When I bought it They said itll loosen up with use, It sounded good to me, At the time I didnt have a problem with them. That was several years ago, And it aint happened yet. Any having this problem out of theirs? Think I could stone the lever or should I leave this to a smith?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

May 30, 2008, 11:40	#2
phillip Banned again FALaholic #: 29433 Join Date: May 2007 Location: Keithville,La. Posts: 2,624	Nobodys got one of these?

May 30, 2008, 16:59	#3
JT Registered FALaholic #: 1835 Join Date: Dec 2000 Location: Knoxville, Tennessee Posts: 146	I have an American CZ, and a FS model. Both safties are very easy to operate, but positive. How old are the crumb snatchers? I have never studied on how the safety works. If it is a detent and coil spring, maybe a coil or two can be cut off. But first I would check that the safety pivots freely on the pin, and it is not bent.

May 30, 2008, 19:23	#4
phillip Banned again FALaholic #: 29433 Join Date: May 2007 Location: Keithville,La. Posts: 2,624	The crumb snatchers are 8,10,34,38, and 73 . Ok, Its not just the crumb Snatchers that have fun with it . Heres a link to the schematic. http://stevespages.com/ipb-czech-452.html Actually I hadn't looked at this link before now, It looks simple enough, Ill give it a look see tomorrow.