are 168gr. bthp ok to shoot in my fal ?

jon coppenbarger · December 31, 2000, 10:26

I have only fired 147gr. rounds out of my fal and was wondering do 168 grain bthp or even the 180 bthp bullets shoot well out of the fal. I am sure they would function fine but is the twist on the barrel to fast to stabilize a heavier bullet. any one out there that could help ? I have shot heavy rounds out of a h&k and my m1a as for the m1a for matches I load 168 grain bthp sierra match kings with 42.5 gr. of imr 4064 or 43 gr. of 4895 and they shoot great in a 1-10 or a 1-11 twist barrel even thow a 1-10 barrel works better when I shoot 173gr or 180 gr. bullets. any help would be great. how about 155gr. palma tips?

Dirtfarmer · December 31, 2000, 16:56

Hey Jon,
I happen to catch your posts, so ...the answer is yes for the 168's but the 180's are likely too heavy particularly out "at range", the FAL's twist rate is a little under 1 in 12 (1 in 11.9" now that I look it up, seemed a little less than that when I measured mine.)
Here's a link to a Shilen page addressing bullet weights vs. applicable twists.
http://www.shilen.com/calibers.htm
Goodwill,
-Dirtfarmer

December 31, 2000, 10:26	#1
jon coppenbarger Registered FALaholic #: 1924 Join Date: Dec 2000 Posts: 276	are 168gr. bthp ok to shoot in my fal ? I have only fired 147gr. rounds out of my fal and was wondering do 168 grain bthp or even the 180 bthp bullets shoot well out of the fal. I am sure they would function fine but is the twist on the barrel to fast to stabilize a heavier bullet. any one out there that could help ? I have shot heavy rounds out of a h&k and my m1a as for the m1a for matches I load 168 grain bthp sierra match kings with 42.5 gr. of imr 4064 or 43 gr. of 4895 and they shoot great in a 1-10 or a 1-11 twist barrel even thow a 1-10 barrel works better when I shoot 173gr or 180 gr. bullets. any help would be great. how about 155gr. palma tips?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

December 31, 2000, 16:56	#2
Dirtfarmer Registered Contributor FALaholic #: 159 Join Date: Jul 2000 Location: Pennsylvania Posts: 962	Hey Jon, I happen to catch your posts, so ...the answer is yes for the 168's but the 180's are likely too heavy particularly out "at range", the FAL's twist rate is a little under 1 in 12 (1 in 11.9" now that I look it up, seemed a little less than that when I measured mine.) Here's a link to a Shilen page addressing bullet weights vs. applicable twists. http://www.shilen.com/calibers.htm Goodwill, -Dirtfarmer