Will a bipod fit on a non-bipod cut barrel (Imbel)

adirondAcK 47 · April 24, 2007, 15:26

Odd question i know. Im a rook, cut me some slack.

Im looking to build one of my Imbel kits into an stg58 clone. I ordered the furniture today and also picked up one of the bipod gunthings has for $36 before i realized that the barrel in my kit is non-bipod cut. Could I remove the sling swivel loop on the barrel (no sling usage isnt a big deal to me) and use that "channel" for the bipod? If not is there some alternative method i could use to properly attach the bipod to the barrel for use with the STG58 furniture?

Thanks in advance

Edgsmth · April 24, 2007, 15:41

I like the looks of the stg bipod, too, and have given some thought to this.

I think that the swivel cut is too close to the handgaurd to work.

It appears that a ring could be soldered to the barrel for the bipod cut. It may or may not mean lengthening the bipod legs.

richbug · April 24, 2007, 16:26

It will work fine, but you won't have a notch for the Bipod Key(it will swivel more than usual).

Did it my self for a while. big problem with the FAL bipod, is that it changes your point of impact dramatically as compared to being supported my the forearm, like up 12 MOA or so.

April 24, 2007, 15:26	#1
adirondAcK 47 Registered FALaholic #: 11477 Join Date: Aug 2003 Location: Syracuse Posts: 18	Will a bipod fit on a non-bipod cut barrel (Imbel) Odd question i know. Im a rook, cut me some slack. Im looking to build one of my Imbel kits into an stg58 clone. I ordered the furniture today and also picked up one of the bipod gunthings has for $36 before i realized that the barrel in my kit is non-bipod cut. Could I remove the sling swivel loop on the barrel (no sling usage isnt a big deal to me) and use that "channel" for the bipod? If not is there some alternative method i could use to properly attach the bipod to the barrel for use with the STG58 furniture? Thanks in advance __________________ Hi

April 24, 2007, 15:41	#2
Edgsmth Registered FALaholic #: 25932 Join Date: Feb 2007 Location: WNY Posts: 582	I like the looks of the stg bipod, too, and have given some thought to this. I think that the swivel cut is too close to the handgaurd to work. It appears that a ring could be soldered to the barrel for the bipod cut. It may or may not mean lengthening the bipod legs. __________________ For Marketplace transactions. I will email or PM you with my shipping information. I require one reply with the following information; Your name and address, The item in question and the total price. If you reply without that information I reserve the right to consider the transaction voided.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

April 24, 2007, 16:26	#3
richbug Registered FALaholic #: 10484 Join Date: May 2003 Location: Western PA Posts: 3,762	It will work fine, but you won't have a notch for the Bipod Key(it will swivel more than usual). Did it my self for a while. big problem with the FAL bipod, is that it changes your point of impact dramatically as compared to being supported my the forearm, like up 12 MOA or so.