WTB: Roll Pin to hold Firing Pin for NMH-91

Bubacus · February 26, 2007, 14:25

I've tried both Nurmich Gun Parts and a company called Poly Technologies for a replacement roll pin that holds my firing pin in place for my NMH-91. Both of the pins I have ordered from these compaines are too small in diameter for the NMH bolt. Anyone know of where else I could pick one of these up?

Thanks

Edgsmth · March 07, 2007, 21:03

http://www1.mscdirect.com/CGI/N2DRVS...00000005522991
http://www.wttool.com/product-exec/p...c_Roll_Pin_Kit

bobotech · March 08, 2007, 12:06

Could tweaking the pin you bought work? Kind of like crushing the pin gently so that the sides bow out a tad or bending it a hair just so that it fits in the hole with pressure?

Edgsmth · March 08, 2007, 19:06

Quote:

Originally posted by bobotech
Could tweaking the pin you bought work? Kind of like crushing the pin gently so that the sides bow out a tad or bending it a hair just so that it fits in the hole with pressure?

I have stood larger ones on end and spread the slot with a small screwdriver and hammer.

February 26, 2007, 14:25	#1
Bubacus Registered FALaholic #: 13971 Join Date: Mar 2004 Location: Massachusetts Posts: 591	WTB: Roll Pin to hold Firing Pin for NMH-91 I've tried both Nurmich Gun Parts and a company called Poly Technologies for a replacement roll pin that holds my firing pin in place for my NMH-91. Both of the pins I have ordered from these compaines are too small in diameter for the NMH bolt. Anyone know of where else I could pick one of these up? Thanks __________________ Bubacus

March 08, 2007, 12:06	#3
bobotech Registered FALaholic #: 25341 Join Date: Jan 2007 Location: spokane, wa Posts: 45	Could tweaking the pin you bought work? Kind of like crushing the pin gently so that the sides bow out a tad or bending it a hair just so that it fits in the hole with pressure? __________________ I love all guns, cheap guns, fancy guns, ugly guns, they are all fun.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

March 07, 2007, 21:03	#2
Edgsmth Registered FALaholic #: 25932 Join Date: Feb 2007 Location: WNY Posts: 582	http://www1.mscdirect.com/CGI/N2DRVS...00000005522991 http://www.wttool.com/product-exec/p...c_Roll_Pin_Kit