|
August 28, 2001, 09:18
|
#1 |
|
Registered
FALaholic #: 1482 Join Date: Nov 2000
Location: US
Posts: 530
|
G1 gas tube
Are these short or long? And soldered or threaded?
I'm planning on building a LB Izzy copy and don't have a long tube. Would I be asking for trouble by removing a short working tube to swap?
__________________
I won't dial 911 . . . I dial 220. Infidel Inside |
|
|
|
August 28, 2001, 17:25
|
#2 |
|
Registered
FALaholic #: 465 Join Date: Jul 2000
Location: St. Paul, MN
Posts: 569
|
My G1 has the long tube.
|
|
|
|
|
August 28, 2001, 17:46
|
#3 |
|
Registered
FALaholic #: 18 Join Date: Jul 2000
Location: PRM
Posts: 79
|
Don't plan on swapping just the tube. You will need the whole gas block, as most short-tube StG58's are brazed and have no threads.
__________________
"Immaginarsi Nessun Liberali" |
|
|
|
|
August 28, 2001, 23:48
|
#4 |
|
Registered
FALaholic #: 1482 Join Date: Nov 2000
Location: US
Posts: 530
|
Sounds like the Izzy furniture would be better suited for the G1 kit.
__________________
I won't dial 911 . . . I dial 220. Infidel Inside |
|
|
|
|
August 30, 2001, 05:35
|
#5 |
|
Registered
FALaholic #: 296 Join Date: Jul 2000
Location: Fredericksburg, Virginia, USA
Posts: 213
|
Can you give us some more specifics, such as what make of barrel you are using. A true Izzy barrel uses a slightly different gas tube and piston. DSA has both available. But, the gas tube is dependent on the barrel and gas block, not the type of configuration you are building.
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
