trilux-suit

mikefrmtx · September 24, 2006, 19:53

ran out of day light, my new build is working fine on S.A., this rifle is hitting at 5 on the clock{ low and to the right } at 30-40 yards, help me with adjustments,
front screw up or down, screw on the right side out or in / lever is pushed forward / right or wrong ?
Thanks for the help, mike

AndyC · September 24, 2006, 20:16

The group will move in the same direction as any change to the rear-sight - ie move the rear-sight more left, grouping will move left; rear sight up, grouping will move higher.

Changes to the front sight results in the opposite happening - screw it down and the grouping will move up, etc.

Another way to think of it is the old army way - always move your front-sight into the error.

Edit: I just noticed you're referring to a SUIT, sorry - turn the front-screw clockwise to move the grouping left - to raise the group, move the other screw away from the D (lever backwards, IOW).

Dunno what ammo you're using but the rule of thumb is if a 7.62 rifle is sighted-in at 25 yards, it's also dead-on at 300

September 24, 2006, 19:53	#1
mikefrmtx Banned (Temp) FALaholic #: 20160 Join Date: Jun 2006 Location: south texas Posts: 73	trilux-suit ran out of day light, my new build is working fine on S.A., this rifle is hitting at 5 on the clock{ low and to the right } at 30-40 yards, help me with adjustments, front screw up or down, screw on the right side out or in / lever is pushed forward / right or wrong ? Thanks for the help, mike

September 24, 2006, 20:16	#2
AndyC Porridge Wog Contributor FALaholic #: 19755 Join Date: Apr 2006 Location: Euless, TX Posts: 11,061	The group will move in the same direction as any change to the rear-sight - ie move the rear-sight more left, grouping will move left; rear sight up, grouping will move higher. Changes to the front sight results in the opposite happening - screw it down and the grouping will move up, etc. Another way to think of it is the old army way - always move your front-sight into the error. Edit: I just noticed you're referring to a SUIT, sorry - turn the front-screw clockwise to move the grouping left - to raise the group, move the other screw away from the D (lever backwards, IOW). Dunno what ammo you're using but the rule of thumb is if a 7.62 rifle is sighted-in at 25 yards, it's also dead-on at 300 __________________ My Iraq Pics Preferred Travel Agent - 72 Virgins Dating Club Last edited by AndyC; September 24, 2006 at 20:35.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode