DSA's stripper clip top covers came in.

Don Williams · August 21, 2001, 12:03

They came in yesterday and look to be metric top covers which have been chopped on the front with the clip guide and reenforcing back strip spot welded on. Excellent looking and Excellent finish(phosphated).They have part of the left guide milled out about 2cm long and therefore will slide too far fwd in my Imbel reciever w/o tightening. I cut the tabs off and flaired the cover to get it tight on the receiver. I also did the israeli trick and tweaked the guides of the cover to upset metal to make the fit tighter. It works fine with FN stripper clips.If you have an inch receiver they will fit fine (I think) but might be a little loose and require some flairing. I don't have any inch guns but all the inch top covers I've used on my metric guns were real tight so I think this part might be a little loose. No big deal though.

**idsubgun** · August 21, 2001, 12:25

Go here for pictures:

http://www.l1a1.com/cgi-bin/forums/u...c&f=1&t=012086

August 21, 2001, 12:03	#1
Don Williams Registered FALaholic #: 2580 Join Date: Feb 2001 Location: Green River Wy USA Posts: 351	DSA's stripper clip top covers came in. They came in yesterday and look to be metric top covers which have been chopped on the front with the clip guide and reenforcing back strip spot welded on. Excellent looking and Excellent finish(phosphated).They have part of the left guide milled out about 2cm long and therefore will slide too far fwd in my Imbel reciever w/o tightening. I cut the tabs off and flaired the cover to get it tight on the receiver. I also did the israeli trick and tweaked the guides of the cover to upset metal to make the fit tighter. It works fine with FN stripper clips.If you have an inch receiver they will fit fine (I think) but might be a little loose and require some flairing. I don't have any inch guns but all the inch top covers I've used on my metric guns were real tight so I think this part might be a little loose. No big deal though. __________________ avoid the chinese curse and be careful what you wish for.

August 21, 2001, 12:25	#2
idsubgun "Comfortably Numb" Bronze Contributor FALaholic #: 3100 Join Date: Apr 2001 Location: Soon to be Missouri Posts: 9,269	Go here for pictures: http://www.l1a1.com/cgi-bin/forums/u...c&f=1&t=012086 __________________ Si vis pacem, para bellum "If you wish for peace, prepare for war"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode