Israeli style forward assist charging handle

Jaybo · September 07, 2006, 15:46

So you need the carrier machined to work with this. How much do the smiths charge to do that?

Is it likely to be better to just buy the ready-made?

Any of the vendors take trade-ins on carriers and other serviceable parts?

mrbonecrusher · September 07, 2006, 16:03

You can make the cut yourself with a good file or Dremel type tool. I usual charge $20-$25 for the cutting the carrier with the mill. Do a quick search and you'll find loads of info on the cut size/location.

**W.E.G.** · September 07, 2006, 16:23

all that stuff at
http://www.falfiles.com/forums/showt...threadid=69448

Jaybo · September 07, 2006, 16:51

Excellent! Thank you very much!

September 07, 2006, 15:46	#1
Jaybo Registered FALaholic #: 17755 Join Date: Jul 2005 Posts: 103	Israeli style forward assist charging handle So you need the carrier machined to work with this. How much do the smiths charge to do that? Is it likely to be better to just buy the ready-made? Any of the vendors take trade-ins on carriers and other serviceable parts?

September 07, 2006, 16:03	#2
mrbonecrusher Registered FALaholic #: 6604 Join Date: Jun 2002 Location: Pocatello, Idaho Posts: 815	You can make the cut yourself with a good file or Dremel type tool. I usual charge $20-$25 for the cutting the carrier with the mill. Do a quick search and you'll find loads of info on the cut size/location. __________________ Ships boarded, plundered and sunk by appointment only. Custom pirate attacks available.

September 07, 2006, 16:23	#3
W.E.G. Administrator Silver Contributor FALaholic #: 1211 Join Date: Oct 2000 Location: Virginia Posts: 31,054	all that stuff at http://www.falfiles.com/forums/showt...threadid=69448 __________________ . . . Ask me about the Mason-Dixon FAL Collectors Association.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

September 07, 2006, 16:51	#4
Jaybo Registered FALaholic #: 17755 Join Date: Jul 2005 Posts: 103	Excellent! Thank you very much!