h/t/s/ question

58772239 · November 15, 2001, 20:03

to keep the g1 legal, i am gonna use the fse set for the lower, and was wondering if i have to change the selector switch to be legal?, or what mods should i do to it to keep it from going into the full auto position, i know the us parts cannot possibly be the same as the auto stuff, but i do not wanna make any legal problems for myself here, any advice would be greatly appreciated, i ahve noticed that the stg58 form century i have does not go into the auto position

Derby FALs · November 15, 2001, 21:25

You don't need to. There is no legal reason to change it but DSA sells a new selector that won't go forward into the Auto posistion. Dan's has a pistol grip without the cutout that accomplishes the same thing. It is the cheapest of the two. The PG cleaning kits will also fit inside it.

vmtz · November 15, 2001, 22:33

If you are worried about it, you could weld up the cut out on the full auto side.

Vince

falover · November 15, 2001, 22:41

you could weld a little tit on the selector so that it hits the pin on the receiver and stops the selector from moving into full auto position (basicaly what the dse selector is like)

**W.E.G.** · November 15, 2001, 22:50

The simplest solution is to get a US grip from Dan at falparts.com. The usual "wedge" cutout is not present on Dan's grip. So it is impossible to flick the lever to the full auto position.

58772239 · November 16, 2001, 07:15

thank you

DuaneFrye · November 16, 2001, 08:41

I really like the re=shaped inch selector that I've seen on some rifles. It's also easier to reach with smaller hands.

November 15, 2001, 20:03	#1
58772239 Registered FALaholic #: 4577 Join Date: Oct 2001 Location: usa Posts: 137	h/t/s/ question to keep the g1 legal, i am gonna use the fse set for the lower, and was wondering if i have to change the selector switch to be legal?, or what mods should i do to it to keep it from going into the full auto position, i know the us parts cannot possibly be the same as the auto stuff, but i do not wanna make any legal problems for myself here, any advice would be greatly appreciated, i ahve noticed that the stg58 form century i have does not go into the auto position

November 15, 2001, 21:25	#2
Derby FALs Supreme Leader FALaholic #: 2361 Join Date: Jan 2001 Location: Louisville, Kentucky Posts: 2,610	You don't need to. There is no legal reason to change it but DSA sells a new selector that won't go forward into the Auto posistion. Dan's has a pistol grip without the cutout that accomplishes the same thing. It is the cheapest of the two. The PG cleaning kits will also fit inside it. __________________ “Rightful liberty is unobstructed action according to our will within limits drawn around us by the equal rights of others. I do not add "within the limits of the law" because law is often but the tyrant's will, and always so when it violates the rights of the individual.” - Thomas Jefferson Salami, salami, baloney... :bow: http://www.derbyfals.com/home.htm

November 15, 2001, 22:41	#4
falover Registered FALaholic #: 4333 Join Date: Oct 2001 Posts: 465	you could weld a little tit on the selector so that it hits the pin on the receiver and stops the selector from moving into full auto position (basicaly what the dse selector is like) __________________ Courage is not the absence of fear It is the ability to transcend fear Remember the W.T.C. 9-11-01

November 15, 2001, 22:50	#5
W.E.G. Administrator Silver Contributor FALaholic #: 1211 Join Date: Oct 2000 Location: Virginia Posts: 31,054	The simplest solution is to get a US grip from Dan at falparts.com. The usual "wedge" cutout is not present on Dan's grip. So it is impossible to flick the lever to the full auto position. __________________ . . . Ask me about the Mason-Dixon FAL Collectors Association.

November 16, 2001, 08:41	#7
DuaneFrye Registered FALaholic #: 3820 Join Date: Aug 2001 Location: Painesville, Ohio Posts: 373	I really like the re=shaped inch selector that I've seen on some rifles. It's also easier to reach with smaller hands. __________________ Duane Only two defining forces have ever offered to die for you, Jesus Christ and the American G.I. One died for Your soul, the other for Your freedom.

November 15, 2001, 22:33	#3
vmtz FALaholic #: 1125 Join Date: Sep 2000 Location: Here right now Posts: 17,638	If you are worried about it, you could weld up the cut out on the full auto side. Vince

November 16, 2001, 07:15	#6
58772239 Registered FALaholic #: 4577 Join Date: Oct 2001 Location: usa Posts: 137	thank you

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode