Gear Logo w/ DSA overstamp

turbomark7 · April 08, 2006, 12:28

This is the rifle I mentioned in an earlier post. My bro-in-law's IMBEL gear logo/DSA overstamp on unissued [unfired] STG kit built by DSA. Recently, ARS trimmed/rethreaded the bbl. and installed the new DSA short muzzle device. Buttstock, pistol grip, top cover, forearm, foregrip and curved 30 from DSA. Two R1 straight 30 mags. Still pending a the new green EOTech sight and sighting-in.

DSA and ARS rock.

**1MOR** · April 08, 2006, 12:48

Never put up a picture of an attractive woman and a weapon for a bunch of guys to look at. They have problems trying to find the rifle-LOL!

Rifle isn't too hard to look at either. Congrats!

**sportsnut** · April 08, 2006, 13:17

Nice STG.

I've also got an STG built on a DSA stamped Imbel receiver. My first, and my only FAL that i didn't build myself.

Cajun Gunner · April 08, 2006, 16:26

The STG in the post is my sweetheart and the chick in uniform is my wife. This is my first post but I review the forum EVERY DAY. Great stuff!! I would appreciate comments on Lasers and Lights to finish off this project. When I am finished I will show Pics of Gun / Vest / Gear / and Handguns that I carry for if and when SHTF TYPE SCENARIO will occur. I relize a lot of people think the preparation we plan for will never happen but I was in New Orleans for the first 2 days after KATRINA in water rescue and trust someone who saw it with his own eyes the SHTF. I look forward to your ideas and comments. Gun Plumber, Thanks for the quality work on my barrel work. Very few people in this world will ever need a gun / Those that do will need one very badly. Mine will be a Fal

Hellion Productions · April 08, 2006, 17:02

When you start loading all those 30-rounders, you're going to thank yourself for putting on that forward PG.

Very nice rifle, and your wife looks like a classy lady. Keep enjoying the good life down there in the land of le Bayou...

Best,
John Bear Ross, married to a Cajun woman. Pass the Zachere's! Aa-ieeee!

ftierson · April 08, 2006, 22:58

It is a nice looking rifle (and your wife is a beauty, too)...

Congratulations.

And welcome to the falfiles as a poster...

I do have one slight concern, however, and that has to do with the CBC ammo that I see in the photo. There has been a recall for some of this ammo...

Check out the following:

CBC 7.62mm NATO ammo

If it looks like your CBC is some of the problematic stuff, talk to me some more...

Forrest

**W.E.G.** · April 08, 2006, 23:05

Quote:

Originally posted by turbomark7
...IMBEL gear logo/DSA overstamp...

I don't suppose you have a pic of the marking you are describing?

Cajun Gunner · April 09, 2006, 03:57

Thanks for the heads up on the CBC ammo. The boxes in the picture were being used for picture purposes only as they belonged to by bro-in-law Turbo Mark 7. The only ammo loaded in my mags currently are the Honady Tap 168 grain bad boys. To your point though I am looking for a high quality bulk ammo for SHTF purposes only. All advice is greately appreciated.

Hellion Productions · April 09, 2006, 04:57

Go South African. Good stuff, decent price, mass quantities available.

Aimsurplus.com should still have plenty.

Best,
John Bear Ross

**sportsnut** · April 10, 2006, 00:49

Quote:

Originally posted by W.E.G.

I don't suppose you have a pic of the marking you are describing?

Gary,

Here is a picture of what mine looks like. Real faint, and kind of hard to see.

Ron

turbomark7 · April 10, 2006, 14:25

Yep - that's exactly how the rifle is stamped. I acquired the gun back in late '99 - of course the sanitized bbl accomodated a goofy muzzle brake attached by three set screws and some of the trigger parts appeared to have been machined by rubbing metal against cinder blocks...... but it's all okay now.

I have a large pile of RA70 brass - my FAL plinking load is the dreadful IMI 150 gr. ball backed by 748 x 46 grs. that groups better than any mil-surp. (developed in my 'glassed '92 Remington PSS w/ Mk.4 scope). Of course, groups shrink further with Nosler, Speer, Sierra or Hornady missiles and com. brass.

Over the years, my brother - FAL Mouth - and I have consumed many cans of RG which functions great; I'm for accuracy and I just don't waste my money on mil-surp anymore.

**sportsnut** · April 10, 2006, 15:35

[QUOTE]Originally posted by turbomark7
[B][b]Yep - that's exactly how the rifle is stamped. I acquired the gun back in late '99 - of course the sanitized bbl accomodated a goofy muzzle brake attached by three set screws and some of the trigger parts appeared to have been machined by rubbing metal against cinder blocks...... but it's all okay now.

I purchased mine around the same time. It didn't have any muzzle device on it, but did have the worst H/T/S that i've ever seen.

Cajun Gunner · April 10, 2006, 19:11

Sportsnut
Please post a pic of your Fal. I would like to see it.
I will be posting pic's of a pair of 30 round mags that Fal mouth sold to me recently. They are brand new, still in the wrapping. They are in the pics with my Fal but I will post a closeup.
Thanks in advance.
Cajun Gunner

M38 · April 11, 2006, 07:30

That is one sweet FAL! (and lady too!)

Cajun Gunner · April 16, 2006, 19:17

Help Guys and Gals.
I am looking for feedback and info on sights and lights to include NVD's. The EO -tech on mine is my bro-in-laws. I am about to to get the new one on green but I am not sure if I want to go NVD compatible or not. What about lights and what is going to hold up to the abuse of the round. All help is appreciated.
Cajun Gunner

April 08, 2006, 12:28	#1
turbomark7 Registered FALaholic #: 7142 Join Date: Aug 2002 Location: Skid Row, LA Posts: 40	Gear Logo w/ DSA overstamp This is the rifle I mentioned in an earlier post. My bro-in-law's IMBEL gear logo/DSA overstamp on unissued [unfired] STG kit built by DSA. Recently, ARS trimmed/rethreaded the bbl. and installed the new DSA short muzzle device. Buttstock, pistol grip, top cover, forearm, foregrip and curved 30 from DSA. Two R1 straight 30 mags. Still pending a the new green EOTech sight and sighting-in. DSA and ARS rock. __________________ *Temple of Cornd0g*

April 08, 2006, 12:48	#2
1MOR Curio & Relic Gold Contributor FALaholic #: 10204 Join Date: Apr 2003 Location: Somewhere South of the Border Posts: 2,072	Never put up a picture of an attractive woman and a weapon for a bunch of guys to look at. They have problems trying to find the rifle-LOL! Rifle isn't too hard to look at either. Congrats! __________________ "People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." George Orwell

April 08, 2006, 13:17	#3
sportsnut Curio & Relic Contributor FALaholic #: 3817 Join Date: Aug 2001 Location: Eugene, Oregon Posts: 3,366	Nice STG. I've also got an STG built on a DSA stamped Imbel receiver. My first, and my only FAL that i didn't build myself. __________________ "Just because you're right doesn't mean I'm wrong." Ron W.

April 08, 2006, 17:02	#5
Hellion Productions Registered FALaholic #: 4517 Join Date: Oct 2001 Location: Pahrump, NV Posts: 1,074	When you start loading all those 30-rounders, you're going to thank yourself for putting on that forward PG. Very nice rifle, and your wife looks like a classy lady. Keep enjoying the good life down there in the land of le Bayou... Best, John Bear Ross, married to a Cajun woman. Pass the Zachere's! Aa-ieeee! __________________ www.johnbearross.com I'm not "that" John Ross...I'm "this" John Ross... Dan Fong Lives...

April 09, 2006, 04:57	#9
Hellion Productions Registered FALaholic #: 4517 Join Date: Oct 2001 Location: Pahrump, NV Posts: 1,074	Go South African. Good stuff, decent price, mass quantities available. Aimsurplus.com should still have plenty. Best, John Bear Ross __________________ www.johnbearross.com I'm not "that" John Ross...I'm "this" John Ross... Dan Fong Lives...

April 08, 2006, 16:26	#4
Cajun Gunner Registered FALaholic #: 19757 Join Date: Apr 2006 Posts: 20	The STG in the post is my sweetheart and the chick in uniform is my wife. This is my first post but I review the forum EVERY DAY. Great stuff!! I would appreciate comments on Lasers and Lights to finish off this project. When I am finished I will show Pics of Gun / Vest / Gear / and Handguns that I carry for if and when SHTF TYPE SCENARIO will occur. I relize a lot of people think the preparation we plan for will never happen but I was in New Orleans for the first 2 days after KATRINA in water rescue and trust someone who saw it with his own eyes the SHTF. I look forward to your ideas and comments. Gun Plumber, Thanks for the quality work on my barrel work. Very few people in this world will ever need a gun / Those that do will need one very badly. Mine will be a Fal

April 08, 2006, 22:58	#6
ftierson Registered FALaholic #: 13827 Join Date: Mar 2004 Location: Colorado Springs, CO Posts: 11,052	It is a nice looking rifle (and your wife is a beauty, too)... Congratulations. And welcome to the falfiles as a poster... I do have one slight concern, however, and that has to do with the CBC ammo that I see in the photo. There has been a recall for some of this ammo... Check out the following: CBC 7.62mm NATO ammo If it looks like your CBC is some of the problematic stuff, talk to me some more... Forrest

April 09, 2006, 03:57	#8
Cajun Gunner Registered FALaholic #: 19757 Join Date: Apr 2006 Posts: 20	Thanks for the heads up on the CBC ammo. The boxes in the picture were being used for picture purposes only as they belonged to by bro-in-law Turbo Mark 7. The only ammo loaded in my mags currently are the Honady Tap 168 grain bad boys. To your point though I am looking for a high quality bulk ammo for SHTF purposes only. All advice is greately appreciated.

April 10, 2006, 14:25	#11
turbomark7 Registered FALaholic #: 7142 Join Date: Aug 2002 Location: Skid Row, LA Posts: 40	Yep - that's exactly how the rifle is stamped. I acquired the gun back in late '99 - of course the sanitized bbl accomodated a goofy muzzle brake attached by three set screws and some of the trigger parts appeared to have been machined by rubbing metal against cinder blocks...... but it's all okay now. I have a large pile of RA70 brass - my FAL plinking load is the dreadful IMI 150 gr. ball backed by 748 x 46 grs. that groups better than any mil-surp. (developed in my 'glassed '92 Remington PSS w/ Mk.4 scope). Of course, groups shrink further with Nosler, Speer, Sierra or Hornady missiles and com. brass. Over the years, my brother - FAL Mouth - and I have consumed many cans of RG which functions great; I'm for accuracy and I just don't waste my money on mil-surp anymore. __________________ *Temple of Cornd0g*

April 10, 2006, 15:35	#12
sportsnut Curio & Relic Contributor FALaholic #: 3817 Join Date: Aug 2001 Location: Eugene, Oregon Posts: 3,366	[QUOTE]Originally posted by turbomark7 [B][b]Yep - that's exactly how the rifle is stamped. I acquired the gun back in late '99 - of course the sanitized bbl accomodated a goofy muzzle brake attached by three set screws and some of the trigger parts appeared to have been machined by rubbing metal against cinder blocks...... but it's all okay now. I purchased mine around the same time. It didn't have any muzzle device on it, but did have the worst H/T/S that i've ever seen. __________________ "Just because you're right doesn't mean I'm wrong." Ron W.

April 10, 2006, 19:11	#13
Cajun Gunner Registered FALaholic #: 19757 Join Date: Apr 2006 Posts: 20	Sportsnut Please post a pic of your Fal. I would like to see it. I will be posting pic's of a pair of 30 round mags that Fal mouth sold to me recently. They are brand new, still in the wrapping. They are in the pics with my Fal but I will post a closeup. Thanks in advance. Cajun Gunner

April 11, 2006, 07:30	#14
M38 Registered FALaholic #: 14974 Join Date: Jul 2004 Location: VA Posts: 148	That is one sweet FAL! (and lady too!)

April 16, 2006, 19:17	#15
Cajun Gunner Registered FALaholic #: 19757 Join Date: Apr 2006 Posts: 20	Help Guys and Gals. I am looking for feedback and info on sights and lights to include NVD's. The EO -tech on mine is my bro-in-laws. I am about to to get the new one on green but I am not sure if I want to go NVD compatible or not. What about lights and what is going to hold up to the abuse of the round. All help is appreciated. Cajun Gunner

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode