More Newby questions! Ohboy!

Trever1t · April 01, 2005, 19:51

Ok, I've learned how to field strip and maintain the rifle. I understand i need a special tool to remove the butstock. How do i remove the handguard and heat shield to access the gas tube od? How do i remove the Bi-pod?

Is there an online source for complete take-down?

Thanks again!

Lon Moer · April 01, 2005, 19:55

A Kaliban Izzy HB! Cool!

splattermatic · April 01, 2005, 21:45

theres a screw that goes thru the gas block, that takes the hg's off.
taking the bipod off may be a problem for you, you have to take the muzzle brake in your case off first then the coupler, the bipod also comes off the coupler with a drift pin.

hth

Trever1t · April 02, 2005, 07:36

Yes, there is a screw that runs thru the gas block, is that all i have to do? It looks like there may be more involved then just that 1 screw?
Is there a source of info that i can find so i can stopp asking these simple questions?

Deltaten · April 02, 2005, 08:28

Trever1t:
Yes, there is...somewhere in the FAQs.

But then, what would we have to do?

For field strip/cleaning, access to the tube is from the front of the GB. Removal of same would NOT be a "field" operation.

Sweet lookin' rifle.
Best,
Paul

April 01, 2005, 19:51	#1
Trever1t Registered FALaholic #: 16999 Join Date: Feb 2005 Location: San Jose Ca. Posts: 42	More Newby questions! Ohboy! Ok, I've learned how to field strip and maintain the rifle. I understand i need a special tool to remove the butstock. How do i remove the handguard and heat shield to access the gas tube od? How do i remove the Bi-pod? Is there an online source for complete take-down? Thanks again! __________________ I hate plastic stocks-Sport a woody!

April 01, 2005, 19:55	#2
Lon Moer Registered FALaholic #: 12098 Join Date: Oct 2003 Location: CA Posts: 3,521	A Kaliban Izzy HB! Cool! __________________ I've known daredevils and I ain't got nothing against them.....its just they're all dead.

April 01, 2005, 21:45	#3
splattermatic "THUG" MODERATOR FALaholic #: 2223 Join Date: Jan 2001 Location: southwestern,usa Posts: 6,791	theres a screw that goes thru the gas block, that takes the hg's off. taking the bipod off may be a problem for you, you have to take the muzzle brake in your case off first then the coupler, the bipod also comes off the coupler with a drift pin. hth __________________ the worst thing about making it to middle age, is watching people you know and love, start dying off. i miss you cubby 10-10-08 kim, thanks for being my friend.

April 02, 2005, 07:36	#4
Trever1t Registered FALaholic #: 16999 Join Date: Feb 2005 Location: San Jose Ca. Posts: 42	Yes, there is a screw that runs thru the gas block, is that all i have to do? It looks like there may be more involved then just that 1 screw? Is there a source of info that i can find so i can stopp asking these simple questions? __________________ I hate plastic stocks-Sport a woody!

April 02, 2005, 08:28	#5
Deltaten Registered FALaholic #: 124 Join Date: Jul 2000 Location: Lancaster, PA USA Posts: 8,498	Trever1t: Yes, there is...somewhere in the FAQs. But then, what would we have to do? For field strip/cleaning, access to the tube is from the front of the GB. Removal of same would NOT be a "field" operation. Sweet lookin' rifle. Best, Paul __________________ All or Nothing! Senator McCarthy was right! and as always......FYB!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode