The FAL Files  

Go Back   The FAL Files > Weapon Specific Forums > The AR Files

Notices

Reply
 
Thread Tools Display Modes
Old June 28, 2017, 07:28   #51
hueyville
Registered
Bronze Contributor
 
hueyville's Avatar
 
FALaholic #: 74557
Join Date: Aug 2014
Location: Foothills of the Blueridge Mountains
Posts: 3,914
Prefer one stamp rifles. Just four little tack welds or pin a sealed suppressor to bring barrel up to 16" OAL and saves the second stamp, can be moved to lower of choice and if change mind not extremely difficult to undo and move without additional BATFE paperwork. Add a binary trigger and have all the happy stuff a person could want with minimum fuss.



__________________
A time will come when people will not listen to accurate teachings. Instead, they will follow their own desires and surround themselves with teachers who tell them what they want to hear. 2 Timothy 4:3 G.W.T.
"If it is worth doing once...it's worth doing it a few more times to get it right." Stimpsonjcat
hueyville is online now   Reply With Quote
Old July 04, 2017, 05:59   #52
fly2.0
Registered
Bronze Contributor
 
fly2.0's Avatar
 
FALaholic #: 79608
Join Date: May 2017
Location: Under fire in Kentucky
Posts: 75
Got my first Piston drive ;

LWRC M6A2 Mid Length HBAR / POF DROPIN TRIGGER / LWRC Free Float Mid length quad rail / Diamond site's / Gunfighter CH /



__________________
==================================

** Buy the Best / Don't mess with the Rest **

==================================

Last edited by fly2.0; July 06, 2017 at 11:53.
fly2.0 is online now   Reply With Quote
Old July 04, 2017, 06:25   #53
fly2.0
Registered
Bronze Contributor
 
fly2.0's Avatar
 
FALaholic #: 79608
Join Date: May 2017
Location: Under fire in Kentucky
Posts: 75
Spikes Tactical HFCL 14.5''Mid Length Barrel pinned TO 16'' by ADCO Suppressor ready
Spikes BCG / Upper & Lower ''Spider''Grey CK set / Spikes Mini rear site /w magpul stock set



__________________
==================================

** Buy the Best / Don't mess with the Rest **

==================================

Last edited by fly2.0; July 05, 2017 at 06:22.
fly2.0 is online now   Reply With Quote
Old July 05, 2017, 03:24   #54
CTW
Registered
 
CTW's Avatar
 
FALaholic #: 41894
Join Date: Jan 2009
Location: Florida
Posts: 2,016
.300 blackout build with Leupold 1-4 firedot and dead table meat.
__________________
ΜΟΛΩΝ ΛΑΒΕ
CTW is online now   Reply With Quote
Old July 07, 2017, 11:32   #55
Cartel
Registered
 
FALaholic #: 78044
Join Date: Jun 2016
Location: USA
Posts: 41
Knight's Armament Company (KAC) SR-15 x NT4 Suppressor



Knight's Armament Company (KAC) SR-25 EMC

Cartel is offline   Reply With Quote
Old July 13, 2017, 19:38   #56
fly2.0
Registered
Bronze Contributor
 
fly2.0's Avatar
 
FALaholic #: 79608
Join Date: May 2017
Location: Under fire in Kentucky
Posts: 75
Update ; Socom M4A1 Upper receiver Stag Arms lefty Half Breed / LWRC Free Float Quad rail / KAC USGI Mini 2-600m rear site / Colt M4 Lower /

__________________
==================================

** Buy the Best / Don't mess with the Rest **

==================================
fly2.0 is online now   Reply With Quote
Old July 19, 2017, 21:51   #57
Slo cat
Master Metal Checkerer
Silver Contributor
 
Slo cat's Avatar
 
FALaholic #: 11908
Join Date: Sep 2003
Location: Corner of 'Walk' and 'Don't Walk'
Posts: 2,924
For Front Sight Practical Rifle course and maybe 3G

Anderson 300 BO upper, Rock River lower, Geissele trigger, Vortex Strike Eagle 1-6x scope. July 2017.




Last edited by Slo cat; July 24, 2017 at 09:53.
Slo cat is online now   Reply With Quote
Old July 23, 2017, 16:27   #58
fnogger
Registered
 
FALaholic #: 51053
Join Date: Dec 2009
Location: places
Posts: 2,222
I've not owned an AR since George Bush the First was in office....

$566.30 total out the door thanks to some prior ownership and a buddy kicking in a couple of items. Not a tack driver yet but has potential... golf balls will fear me at 200 yards one day.


PSA PA-15, 20" A2 profile barrel w/ 1:7 twist and nitride finish, rifle length gas system, PSA's "Enhanced Polished Trigger", PSA aluminum 15" m-lok hand guard, Burris PEPR riser/rings (thanks to my buddy), Simmons WTC 6.5-20x50 w/AO (owned for years), Colt branded 20 round mag (buddy again), Magpul m-lock sling swivel stud/bipod stud ($20 waste - the bipod had bad juju on accuracy), Ergo brand grip (based on fondling several on other ARs).

Planned changes -

1 - possibly scope... love this one, but it may go back on my target 10/22 since I see one good vendor with a blem Leopold for cheap. I can live with ugly as long as it works....

2 - hand guards gotta go. Waffling between the Hogue tube or similar if I can find free float stippled tube long enough to cover gas system, OR plain old A2 style hand guards, OR making a FAL style set out of wood following that howto that was posted a few years back.

3 - mags and ammo. Discovered that p-mags cause accuracy issues - I was getting distinct left-side and right-side groups with the 10 round p-mag I got for bench use (flush w/ bottom of mag well). A Colt brand 20 rounder fixed that...


Edit to add current pic due to below request -

__________________
Be conservative in what you do, be liberal in what you accept from others

Last edited by fnogger; July 24, 2017 at 06:14.
fnogger is online now   Reply With Quote
Old July 28, 2017, 16:52   #59
fly2.0
Registered
Bronze Contributor
 
fly2.0's Avatar
 
FALaholic #: 79608
Join Date: May 2017
Location: Under fire in Kentucky
Posts: 75
Quote:
Originally Posted by fnogger View Post
I've not owned an AR since George Bush the First was in office....

$566.30 total out the door thanks to some prior ownership and a buddy kicking in a couple of items. Not a tack driver yet but has potential... golf balls will fear me at 200 yards one day.


PSA PA-15, 20" A2 profile barrel w/ 1:7 twist and nitride finish, rifle length gas system, PSA's "Enhanced Polished Trigger", PSA aluminum 15" m-lok hand guard, Burris PEPR riser/rings (thanks to my buddy), Simmons WTC 6.5-20x50 w/AO (owned for years), Colt branded 20 round mag (buddy again), Magpul m-lock sling swivel stud/bipod stud ($20 waste - the bipod had bad juju on accuracy), Ergo brand grip (based on fondling several on other ARs).



Planned changes -

1 - possibly scope... love this one, but it may go back on my target 10/22 since I see one good vendor with a blem Leopold for cheap. I can live with ugly as long as it works....

2 - hand guards gotta go. Waffling between the Hogue tube or similar if I can find free float stippled tube long enough to cover gas system, OR plain old A2 style hand guards, OR making a FAL style set out of wood following that howto that was posted a few years back.

3 - mags and ammo. Discovered that p-mags cause accuracy issues - I was getting distinct left-side and right-side groups with the 10 round p-mag I got for bench use (flush w/ bottom of mag well). A Colt brand 20 rounder fixed that...


Edit to add current pic due to below request -


Very Nice . Looks bad ass .
__________________
==================================

** Buy the Best / Don't mess with the Rest **

==================================
fly2.0 is online now   Reply With Quote
Old August 02, 2017, 17:29   #60
fly2.0
Registered
Bronze Contributor
 
fly2.0's Avatar
 
FALaholic #: 79608
Join Date: May 2017
Location: Under fire in Kentucky
Posts: 75
My New Beater Upper ;

11.5'' Bushmaster Barrel & chop off FSB $110 / DPM lefty upper receiver $70 /and last $23.95 keymod 10.5'' HG /

__________________
==================================

** Buy the Best / Don't mess with the Rest **

==================================
fly2.0 is online now   Reply With Quote
Old August 04, 2017, 12:37   #61
hueyville
Registered
Bronze Contributor
 
hueyville's Avatar
 
FALaholic #: 74557
Join Date: Aug 2014
Location: Foothills of the Blueridge Mountains
Posts: 3,914
Quote:
Originally Posted by fly2.0 View Post
My New Beater Upper ;

11.5'' Bushmaster Barrel & chop off FSB $110 / DPM lefty upper receiver $70 /and last $23.95 keymod 10.5'' HG /
Don't forget it's a pistol and accidentally hold it wrong. Between allowing the pistol brace, binary triggers and pinning suppressors to skip an SBR stamp really don't understand why we have any rules left on which way we snap out Leggo blocks together.
__________________
A time will come when people will not listen to accurate teachings. Instead, they will follow their own desires and surround themselves with teachers who tell them what they want to hear. 2 Timothy 4:3 G.W.T.
"If it is worth doing once...it's worth doing it a few more times to get it right." Stimpsonjcat
hueyville is online now   Reply With Quote
Old August 06, 2017, 13:06   #62
fly2.0
Registered
Bronze Contributor
 
fly2.0's Avatar
 
FALaholic #: 79608
Join Date: May 2017
Location: Under fire in Kentucky
Posts: 75
Quote:
Originally Posted by hueyville View Post
Don't forget it's a pistol and accidentally hold it wrong. Between allowing the pistol brace, binary triggers and pinning suppressors to skip an SBR stamp really don't understand why we have any rules left on which way we snap out Leggo blocks together.
====================
(A quote for the other side)

If you build a pistol, have a unmodifed brace on it, and place it on your shoulder while shooting, you are OK.

If you build a pistol and modify your brace to make it into a shoulder stock, you are in violation of the GCA of 1934.
_

( Unquote )
=============
Taken from another dis. board , about the newest ruling on the brace .
__________________
==================================

** Buy the Best / Don't mess with the Rest **

==================================
fly2.0 is online now   Reply With Quote
Old August 08, 2017, 07:23   #63
fly2.0
Registered
Bronze Contributor
 
fly2.0's Avatar
 
FALaholic #: 79608
Join Date: May 2017
Location: Under fire in Kentucky
Posts: 75
Gun Joker has 11.5'' Colt Commando Barrel's HBAR assembly's , shipped $170 / 91 left (as of saturday 8/12 only 67 left) . date stamp 2015 cage code number's 1/7 are under the top HG/gas tube

On the top in the picture is the HBAR Barrel w/ Lefty upper receiver , LWRC FF HG's
on the bottom is a Colt factory LE6933 LE-trade in

__________________
==================================

** Buy the Best / Don't mess with the Rest **

==================================

Last edited by fly2.0; August 12, 2017 at 05:19.
fly2.0 is online now   Reply With Quote
Old August 12, 2017, 05:20   #64
fly2.0
Registered
Bronze Contributor
 
fly2.0's Avatar
 
FALaholic #: 79608
Join Date: May 2017
Location: Under fire in Kentucky
Posts: 75
Finely got my HBAR collection Done ;

20'' HBAR 2015 barrel KEYMOD FF - Converted to Lefty
14.5'' Pinned to 16.1'' SOCOM M4A1 HBAR 2016 Barrel LWRC FREE FLOAT QUAD RAIL - Converted to Lefty
11.5'' Colt Commando HBAR 2015 barrel LWRC FREE FLOAT QUAD RAIL - Converted to Lefty

__________________
==================================

** Buy the Best / Don't mess with the Rest **

==================================

Last edited by fly2.0; August 14, 2017 at 06:49.
fly2.0 is online now   Reply With Quote
Old August 14, 2017, 06:44   #65
fly2.0
Registered
Bronze Contributor
 
fly2.0's Avatar
 
FALaholic #: 79608
Join Date: May 2017
Location: Under fire in Kentucky
Posts: 75
Finely got to test fire my new Colt/FN CHF 16'' MID LENGTH Barreled Colt RH upper receiver / Bushnell 1x24 / KAC Iron secondary sites / Colt M4 lower w/ POF trigger / Ambi control's - Mag Release & Selector /

Dial in @ 100 yds.



New Converted Colt/Stag Lefty Upper receiver / 6933 Commando HBAR 11.5'' Colt Barrel 2015 date stamp / KAC Iron 2-600m rear site / LWRC Free Float Quad rail / KAC cover's / Anderson Lower KAK tube & Brace / Ambi Control's - Mag Release & Selector / Bushmaster Trigger /

Dial in @ 100 yds

__________________
==================================

** Buy the Best / Don't mess with the Rest **

==================================

Last edited by fly2.0; August 14, 2017 at 06:56.
fly2.0 is online now   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 02:49.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
©1998-2015 The FAL Files