The FAL Files  

Go Back   The FAL Files > Weapon Specific Forums > The SIG Files

Notices

Reply
 
Thread Tools Display Modes
Old October 09, 2017, 10:09   #1
Fleabus
Registered
 
FALaholic #: 10700
Join Date: May 2003
Posts: 606
sig trijicon novak style sights

I've been looking at the neat appearing novak angled trijicon sights for my recently aquiered 220.
has anyone here had experience w these style sights or seen a set?
I have trouble with my hands these days and was wondering how difficult the dovetail fitting is.
Over past yrs ive built and done quite a bit w various makes but my hands dont cooperate as well today.
Any input you cam give on these novak styles is much appreciated.
Thanks a bunch guys..
Fleabus is online now   Reply With Quote
Old October 11, 2017, 09:36   #2
MAINER
Old Salt
Bronze Contributor
 
MAINER's Avatar
 
FALaholic #: 18465
Join Date: Oct 2005
Location: Maine
Posts: 9,189
I have a couple sets of Novaks that I'm fond of. One set is on a S&W that isn't as bright as new at 9+ years , but still useful. The other is or was on my P229. I picked it up on Gotbroker for less than $400 and converted it from DAO to DA/SA. Just when I had the thing the way I wanted, my daughter claimed it and I haven't seen it since, but I think the sights are working fine.

I don't think fitting Novaks to your 220 would be much of a problem, but you can have Novak do it for you to be sure.
http://www.novaksights.com/Products.aspx?CAT=9473

I like to tinker, but with this type sight, the old hammer and punch trick may not be the best solution.
__________________
Lord, keep your arm around my shoulder and your hand over my mouth.
MAINER is online now   Reply With Quote
Old October 11, 2017, 11:31   #3
Fleabus
Registered
 
FALaholic #: 10700
Join Date: May 2003
Posts: 606
thank u buddy for your info it means alot to me that cared
to let me know your info
best randy....
Fleabus is online now   Reply With Quote
Old October 15, 2017, 07:12   #4
Slaughter
Veteran Member
Silver Contributor
 
Slaughter's Avatar
 
FALaholic #: 73180
Join Date: Jan 2014
Location: Lancaster, CA
Posts: 1,120
I just fitted Novak sights to my Sig 1911. I have a sight press so didn't have to hammer-off the front sight but the rear sight was just a slide-in-place by hand and held with the set screw provided.
Slaughter is offline   Reply With Quote
Old October 15, 2017, 11:35   #5
SPEEDGUNNER
Firearms Connoisseur
Gold Contributor
 
SPEEDGUNNER's Avatar
 
FALaholic #: 43933
Join Date: Apr 2009
Location: Between the Brandywines
Posts: 3,473
I have upgraded several SIG pistols to night sights with mixed success. On several the old sights came out with no issue and the new ones slid right back into the dovetail. On a couple I ended up throwing up the white flag and heading to the local smithy, as those ba$tards wouldn't budge!!

Good luck.
__________________
"There's a race of men that don't fit in,
A race that can't stay still;
So they break the hearts of kith and kin,
And they roam the world at will."
- Robert Service
SPEEDGUNNER is online now   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 20:26.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
©1998-2015 The FAL Files