The FAL Files  

Go Back   The FAL Files > Weapon Specific Forums > The HK Files


Thread Tools Display Modes
Old April 08, 2019, 19:26   #51
long-time Texas taxpayer
Silver Contributor
Texgunner's Avatar
FALaholic #: 4653
Join Date: Nov 2001
Location: Brokenoak in central Texas-Milam county
Posts: 8,728
Well, I'll tell ya right now; I'm definitely asking Santa for one of these this Christmas!
"The rock of democracy will founder when people think of people unlike themselves as the "other"-Teddy Roosevelt

My daddy was a cowboy in his younger days, wild as the west Texas wind. He once told me, "Son, death is a horse you got to ride. So you better get your saddle ready."-Mick "Pappy" Connors

heavily armed, easily pissed.
Texgunner is online now   Reply With Quote
Old April 10, 2019, 22:40   #52
FALaholic #: 55596
Join Date: Aug 2010
Location: Maryland
Posts: 932
You'll be glad you bought one sir!

In this post, we're going to look at few detail shots of an original Cetme L as built by the Spanish. I'm not going into great detail on the rifle because there really is very little difference between it and the MCM offering externally. The HMG rifle is very close too. First, let's start with a word about colors. As noted earlier, the paint and furniture hues varied significantly over the production run of the rifle. When you consider wear, probable multiple subcontractors, exposure to UV light, time, exposure to chemicals and exposure to things I'm not even considering, you're gonna' see a rainbow of greens and even some grey. Again, think pine forest in spring. Another factor is lighting when the picture was taken. Below are two pictures taken of the exact same rifles (an original and a MCM) in the exact same position using the exact same camera. Only the lighting has changed:

If you didn't know better, you would swear we were looking at four different rifles in four different shade of green. Yes, I sound like I'm beating a dead horse here but I know someone is going to ask why HMG and/or MCM didn't finish their rifles in the same color as the originals. The answer is that they did. They just didn't finish it in the same hue you are looking at. Ok, done with that. Moving on.

First up are a few overall comparison shots of the three manufacturers. Click on any of the next 8 pictures and they should get larger. I have no idea why they are fighting with me. Computers and I don't really get along.

Right side:

Original is at the top with MCM below and HMG on the bottom.

Left side in same order:

Detail receiver right side, Spanish:



Detail receiver left side, Spanish:


The bit of blue tape is leftover from test firing. MCM tapes off various places during testing so that your rifle's finish doesn't get dinged up in the process.


There is a serial number there. It just didn't show up for some reason.

The rest of the pictures in this post will only show an original unless specifically stated otherwise.

A little bit better shot of the Santa Barbara logo:

Notice that the pistol grip color doesn't match the stock color.

Compare the above to the same shot of an MCM. It isn't 100% exact but as close as can be reasonably expected:

Welds on right side of cocking tube:

Top of cocking tube:

Left side of cocking tube:

Right side of rear sight:

Left side of rear sight:

Magazine well markings, reinforcement ribs:

Selector and serial number:

Stock pin holes:

Ejection port flare:

I originally thought this detail terminated farther toward the front of the port. I was wrong.

Weld at rear of trunnion where it meets the carrier rail:

One of my original complaints about the welds on the MCM rifle involved them not copying this detail more closely. I REALLY like how well the Spanish addressed this weld. I just looks so intricately done. But Frank explained to me that MCM decided to close this area up a little more completely because of propellant blowback. I do have to say, while the MCM solution isn't quite as elegant looking as the original, it DOES work as intended.

Cross section at rear of receiver:

From another angle:

Back of rear sight and a view along the receiver:

Note the paint run at the top rear corner of the sight and, more interesting, the fact that there is no divot for a scope mount. Some rear sights have it and some don't. I have no idea why but I'd bet that it's absent on later production.

Trigger box:

It is shown above with the hammer fully down and being held by the safety sear. When the bolt group locks forward and your finger is off the trigger, it will trip the safety sear and the hammer will rise slightly to the position shown below where it is being held by the trigger sear:

Whoop-de-do! Why does this even matter?? Here's why. Practically speaking, you don't need to remover the trigger box for cleaning every time you clean the rifle; it just doesn't get that dirty. Removing the trigger box is, to be blunt, a fiddly pain in the buttocks so it would be nice if you could leave the box in place, just pull the funky dirty bolt group out, clean it, clean your barrel and then slap it all back together. Well, on an original rifle you can do that because, when you pull the bolt to the rear, the safety sear holds the hammer low enough that it does not interfere with your sliding the bolt group back into the receiver and driving it home. Unfortunately, the safety sear is not present on the either the MCM or HMG rifles because it's a full-automatic part. This means that the hammer is only ever held by the trigger sear in the higher position thus preventing the bolt from being driven home without having first removed the trigger box. That kinda' blows but the alternative is having no rifle at all thanks to silly ATF rules. I hope that all made sense!

Bolt group showing Spanish applied finish:

When I first disassembled my MCM rifle, I assumed it just came out of an unissued rifle because the phosphate finish looked exactly like the finish seen here. Nope. Every single original part has been stripped and refinished by MCM. It just looks identical to the original finish because they REALLY did their homework. Schweet!!

Weld at front of magazine well:

This is another detail that I originally found a bit disappointing on the MCM rifle but have since discovered is done just like an original. On the HMG AMG, this weld is ground flat and nicely dressed. It looks better (and that's nice) but it's not original. MCM left it just as an original would be (and that's nice too). This is one of those little things that makes me like both the HMG and MCM offerings. Both have plenty of things to like.

In my limited experience, Spanish firearms are usually almost completely devoid of markings save for the main ones. They aren't like German or Soviet firearms where you find little inspection marks all over the place. True to form, this marking on the barrel is the only one I found:

Maybe if I spent hours pouring over every single nook and cranny, I would have found a couple more but I simply didn't have that kind of time. I asked Dave if I could just take it home with me and I'd return it in a week and he just grinned. Yes, I know that would be illegal. Don't get yourself in a snit.

Alright, that's it for tonight. We're in the home stretch. Just a couple more small things to cover (including a look at what was done to repair my rifle including my first range trip after I got it back) and we're done. As always, thank you for your time and I will leave you with a word of advise. Avoid dropping your rifle from a 100 foot cliff. It may break when it hits the bottom. OK bye!!
I ain't too bright!
Forums are for furthering knowledge, not bragging about what you've got.

Last edited by Combloc; April 10, 2019 at 23:08.
Combloc is online now   Reply With Quote
Old April 11, 2019, 00:25   #53
7.92 Dreamin
FALaholic #: 82122
Join Date: Feb 2019
Location: Richmond, CA
Posts: 106
Originally Posted by Combloc View Post
Whoop-de-do! Why does this even matter?? Here's why. Practically speaking, you don't need to remover the trigger box for cleaning every time you clean the rifle; it just doesn't get that dirty. Removing the trigger box is, to be blunt, a fiddly pain in the buttocks so it would be nice if you could leave the box in place, just pull the funky dirty bolt group out, clean it, clean your barrel and then slap it all back together. Well, on an original rifle you can do that because, when you pull the bolt to the rear, the safety sear holds the hammer low enough that it does not interfere with your sliding the bolt group back into the receiver and driving it home. Unfortunately, the safety sear is not present on the either the MCM or HMG rifles because it's a full-automatic part. This means that the hammer is only ever held by the trigger sear in the higher position thus preventing the bolt from being driven home without having first removed the trigger box. That kinda' blows but the alternative is having no rifle at all thanks to silly ATF rules. I hope that all made sense!
To save you some trouble-- if you stick your index finger through your ejection port you can press the hammer down. Easiest done with the gun vertical, barrel resting on the ground, and the bolt carrier group sitting in back of receiver resting on hammer. Slip index finger in as deep as you can, back of hand against the receiver, and press the hammer down with the inside of your pointer finger and the BCG just falls in.

Removal of the trigger pack is by far one of this rifles weakest points.

It may just be an issue with the HMG flats, but it's possible to get the safety in a position where its 'locked' flat with the receiver, but the trigger pack is out of position, essentially locking the entire thing up. Lord knows how I got it like that, and i'm still not sure how i got it undone. But it's possible to do.
7.92 Dreamin is offline   Reply With Quote
Old April 18, 2019, 22:51   #54
FALaholic #: 55596
Join Date: Aug 2010
Location: Maryland
Posts: 932
Sorry I haven't been at this for a bit but it's spring and things don't get done around the property unless you take the time to do them!

Before moving on to the repair on my rifle, I just have a couple loose ends to tie up. First, are a couple pictures of a few final assembly stations. This is where assembly of your rifle is finished up and Quality checked prior to test firing:

I noticed an unbent flat with parts assembled to it showing an "inside" view of the Cetme. I thought it was kinda' neat so I snapped a shot:

It wasn't all about Cetme's. The guys knew I love Swisstory so they told me they'd have a few things there I might be interested in. One of them was a select fire Chilean contract 510, shown here with my AMT:

Chilean marking on receiver:

SIG built it with a different pistol grip than they offered on the US imports:

AMT grip for comparison shown on the left:

There are other differences between the two and Dave had lots of other nice Swiss things including a Tb-41 anti-tank rifle but......that's a topic for a different time. Back to the task at hand.

For some reason, the rest of the pictures in this post show up stupid large unless I make them too small. Just click on any of them and it should get larger. I really don't get along with technology very well, sorry about that.
As I finished up my day with the fine folks at MarColMar, I asked one thing of Mr. Bane. After briefly explaining my fascination with origami firearms I asked it I could take a receiver flat with me. I told Dave that I would not sell it and I would not build a rifle on it. I simply wanted one for a souvenir of a day well spent and I also wanted one because I consider such things as Industrial Art. Dave graciously obliged and he gave me a neato MarColMar cap too! I think it looks good hanging in my home as Art, a vessel for good memories and as a reminder of new friends! I just have to decide which way it looks best :

My Honey's brother was over today and asked, "What's that bracket for?" He had no idea what it was and I guess he thought it was for hanging a TV or some such device. Everyone has their own thoughts about what constitutes sculpture I guess. LOL.

Alright, time to wrap this up.
I left my rifle at MCM on a Thursday and headed home. They determined that the front sight tower was askew and this was causing the problem. They tried to repair it while I was there and, while it was better, it was still shooting a few inches left at 100 yards with the rear sight moved fully to the right. The following Monday, I received an email telling me that it as now shooting straight and a picture was attached showing me the results on a target at 100 yards. I wrote back, asking what was done and received a highly detailed and technical description which, because I'm not the sharpest tool in the shed, I did not 100% understand. Suffice it to say, they removed the sight, dressed the barrel and repined it using a solid steel pin. I was also told that they are changing production methods slightly so that this does not happen in the future. By the end of the week, I had my rifle back in hand. It was returned to me extremely well packed, the test target was in the box, and the entire rifle was cleaned and oiled. I couldn't have asked or reasonably expected more and I consider what was done to be absolutely Stellar service.

Here are right and left side views showing the new, solid pin:

The scuff marks on the sight cannot be helped. Because the heat shield fits tightly on the sight, finish wear is unavoidable if it is removed and reinstalled even a few times. Besides, the marks cannot be seen when the handguard is mounted.

Off to the range I went to find out if it worked. I took the HMG AMG along too to compare. I had to move the rear sight four clicks to the left and it's now zeroed. Schweet! I continue to fight with the front sight on the MCM because, as stated earlier, it's too small for my aging eyes although I'm sure it'll be just fine for the younger folks or those with better eyes than me. Because the HMG has a thicker sight, I tend to shoot it a little better. Apparently, different thickness front sights were supplied for original rifles. However, MCM has replaced the original sight with a new manufactured one and rethreaded the original sight base on their rifles so that a finer adjustment can be obtained and the sight can be adjusted more easily. Unfortunately for me, this change in threads means that I cannot simply switch out the skinny sight for a larger original one. I really wish they would offer a thicker sight.

So, below are my targets at 100 yards using 40 rounds of American Eagle 55 grain FMJ. First up is the MCM. Please remember what I always say......I'm a poor shot. You will most likely get better results than I show because you are most likely a better shot than me so don't judge the rifle by my results!! The most important take away here is that it's now centered after MCM effected repairs:

And the HMG:

Here is the rear sight on the MCM after final adjustments:

It's just a bit to the left but still perfectly within tolerance. I'm quite happy with the results.

Something I would recommend to anyone with an HMG rifle is that, at a minimum, they replace at the original worn out recoil and buffer springs. Ideally, I would recommend that you replace all of the springs for the best reliability but definitely DO replace the recoil and buffer springs. If you do not, you run the risk of your rifle beating the stock and/or the receiver to death. Remember that picture I posted showing a huge bin of stocks headed off to the scrap man? That means original stocks aren't going to be around forever. So, if you want to keep that original stock as long as possible, switch out the springs with new ones available from MCM. Below are a couple pictures that show why I think you should do this.
The first one shows the receiver on my MCM rifle after 60 rounds:

I have placed black electrical tape where the casings bounce off the receiver upon ejection. Notice the absence of marks on the tape.

Here we see the HMG receiver after 60 rounds:

It bounces the casings off the receiver behind the ejection port. Notice how the tape is chewed up and pierced. Clearly, the HMG rifle is throwing them out much more violently. While the rifle is 100% reliable with good quality magazines with strong springs, the ejection pattern is wildly erratic compared to the MCM rifle and they are thrown much farther too. To me, it's obvious that the new MCM springs are much stronger than the originals in the HMG AMG. I don't know how much MCM is charging for the springs but I'm sure it's going to be a whole lot less than the price of a new receiver or an original stock. Of course, you can but a new made MCM stock too...….just buy some new springs, OK?

Alrighty, on to conclusions.
At this point, I have at least 400 rounds through the MCM. I say "at least" because, while I normally keep track of what I shoot and how many I shoot, I did not keep track of how many rounds we put through it the day I was at MCM and I also have no idea how many were put through it after a I left. To date, I'm aware of two stoppages, both failures to feed and both on the day I got it back.
Thus far, I cannot say enough good things about either the HMG and MCM AMG. While I wouldn't particularly want to take either to war, I do love taking them to the range. Of all the 5.56 rifles I own (and that's quite a few) with the exception of the M249, felt recoil is least with the AMG. Yes, we're only talking about a little .22 rifle here but still, the AMG is at the top. Also, what minimal recoil there is, is essentially straight back because of the well thought out straight line configuration of the design. Neither AMG is a marksman's rifle but then it wasn't designed to be. You are always going to get the idiot asking "what will this rifle do that my craptastic AR won't do already?" Well, for one, it won't be an AR. But asking that silly question in the first place misses the point entirely. I can't speak for MCM and I can't speak for HMG but I can speak for myself and it seems to me that the point of a new made CETME L is, quite simply, to provide you with a Quality reproduction of a late cold war Spanish designed roller lock so that you can have fun at the range and own a piece of firearms History. The point is to build a rifle that is actually better than the original, one that brings a smile to your face and one that might spark a conversation at the range....which could lead to a new friend and new experiences. If I'm right and that is the point, both rifles have succeeded in my book.
I really enjoy both of them and I look forward to many enjoyable and memorable range trips in the future. My advise is to buy at least one AMG. If you want one that is as close to all original as you can get and you don't mind or even like the worn in beat up look, buy the HMG but make sure you replace the springs. If you want a rifle that looks just like an original when it was brand new AND has the added bonus of being chocked full of research, engineering and materials far superior to that found in an original AND is backed up by a company that has customer service second to none, buy the MCM. Either way, buy a Cetme and let the good times lock! See you at the range; I'll be the guy with the cool, 80's looking, green Army Man Gun!
I ain't too bright!
Forums are for furthering knowledge, not bragging about what you've got.

Last edited by Combloc; April 19, 2019 at 19:52.
Combloc is online now   Reply With Quote
Old Yesterday, 22:22   #55
FALaholic #: 55596
Join Date: Aug 2010
Location: Maryland
Posts: 932
Today, I received a box of goodies from the good folks at MarColMar! They found a small quantity of first pattern handguards in Spain and managed to get them imported and up for sale on their website . I've been wanting one of these for a long time but they have been impossible to find. A little History is in order.
When the CETME L was first designed and produced in the early 1980's, certain features such as the rear sight and handguard were very similar to those found on the HK33/93. Very early on, perhaps even during the trials period, the rear sight was changed to the simpler and less expensive to produce flip sight. At some point, the handguard was redesigned too but I suspect that was done a little later than the rear sight change because many of the law enforcement rifles in Spain still have the first pattern handguard. Apparently, the first pattern did not dissipate heat well enough. After now having the first pattern in hand, I'd be willing to bet it was also more expensive to produce. Whatever the case, the military switched out all of their early handguards for the more heat efficient second model we see today and apparently scrapped the originals making them quite rare these days save for rifles issued to the Guardia Civil. Most of their L's still have the first pattern because they generally don't use their rifles much to begin with, let alone in a full-auto capacity, so melty handguards aren't an issue for them. The moral of this story is that it was believed that almost all of the first pattern jobbers were long gone......until MarColMar hit gold because they refused to give up the search. Yeah, it's just a handguard to many but, to me, it's a little bit of treasure. These have never been documented in detail until right now and I get to be the guy to do it. Let's take a look!

Five examples of the original issue CETME L handguard :

A closer look at them:

Notice the one on top is a different shade of green. If you look at the picture of a bunch in a box over the MCM's website, you'll see quite a palette of colors were produced.

Left side view:

Right side:

The little circle towards the rear is a rivet head.

Bottom view showing more rivets:

Notice that it was molded in left and right halves. That's not a mold seam running the length of the bottom but rather a line created where the two separate halves meet. At first this puzzled me. Why would you mold two "L" shaped halves instead of one unit that is "U" shaped?? Well, the answer revealed itself when trying to install and remove it from the rifle. You have to flex the handguard a little bit to install it and a lot to remove it. If it were one piece, it would crack lengthwise eventually. Molding it in two halves and riveting them to steel and aluminum subcomponents allows the entire assembly to flex without stressing the polymer. This complicated construction quite a bit but it's a clever solution.


Note the aluminum heat shield. It probably doesn't do much because it's essentially lying flat against the polymer it's meant to protect. If there is any airspace between the two, it's got to be very little.



Notice the various rivets and the small steel plate at the far rear for strengthening.

A detail of the rear showing the strengthening plate and the round sheet metal mounting point that engages the front trunnion on the rifle:

When removing the handguard, this area flexes the most. I assume the round mounting point would crack eventually were it not for the strengthening plate taking some of the flex load.

A front view of the rear mounting point:

Note the clean stamping and rivet detail.

Rear inside view of the nose cap showing how the heat shield disappears underneath it:

The fuzzy bits you see are stuck to cosmoline. None of the five a bought show evidence of ever having been mounted on a rifle.

Nose cap detail:

Notice the sloppy black paint on the rivet head contrasting with the rough phosphate finish on the steel.

Welds holding the front mounting point to the nose cap:

One of the five also has what looks to be spot welds too:

The nose cap with spot welds (shown on the right below) also has slightly different nose rivets:

They are more flat as opposed to the ones on the left being domed.

Detail of a recessed rivet head on the right side of the handguard body:

Its painted with green paint.

All of the rivets other than those on the nose cap are recessed and painted green:

You can see where they slurged some paint out of the holes. No, "slurged" isn't a word you'll find in a dictionary but it's my word and now you know what it means. "Awwww man, you put too much jelly on the sandwich and it's slurging out the sides! What a mess!!"

You can clearly see the slurgy paint job on this different shade of green handguard:

The green paint is the same shade on all five examples.

Detail of a Quality paint job on the bottom nose cap rivets:

Meh, it's fine. Think of it as abstract art.

The one that has spot welds in the nose cap and different rivets also has a shiny aluminum heat shield where the others have dull aluminum:

I have to say it because somebody will ask if I don't....the shiny one is on top.

Detail shot showing where the aluminum meets the polymer:

Again, this is not a very good design as there should be an air gap. I'm sure I'll never get it hot enough to matter though so hey, it's neato!

To beat a dead horse on the heat issue, here we see the rear view of an HK33/93 handguard:

Compared to the CETME L:

Notice how the heat shield on the HK is held off from the body by the rear mounting point creating an air gap between the two, especially along the bottom. In the CETME design, the shield is simply folded into a "U", dropped into place and the rear mounting point is then riveted in place actually sitting on top of the heatshield, sandwiching the shield between the mounting point and the polymer. Not only that but the CETME shield is actually riveted to the body of the handguard farther forward, pulling them tight together. I guess it's better than nothing but probably not by much. OK, we're done talking about hot stuff.
I ain't too bright!
Forums are for furthering knowledge, not bragging about what you've got.
Combloc is online now   Reply With Quote
Old Yesterday, 22:26   #56
FALaholic #: 55596
Join Date: Aug 2010
Location: Maryland
Posts: 932
An interesting thing I noticed on the polymer parts of all five handguards is that there is absolutely NO molding differences among them. All five left sides are absolutely identical and all five right sides are absolutely identical. This means that only one mold was used. Let me show you:

Although only two are shown here, the other three are identical. Look closely at the angled vertical line. Notice the little blob at about the midpoint where the single horizontal line intersects. That blob is identical on both handguards. Now look at 7 o'clock position from the blob. See the little tiny indent in the angled vertical that you might mistake for a scratch. Notice that mark is there on the other handguard. Farther up the angled vertical line is another similar little dent in exactly the same place on both handguards. I'm not going to insult you by pointing out each and every little indicator but keep comparing all the details between the two and you'll come to realize that both came out of the same mold. I find it astounding that you would mass produce something like this and only use ONE mold! Of course, a sample of five is not a good statistical set is not unreasonable to infer that there was probably only one manufacturer making this part. That means color variation is due to polymer batches and not to different manufacturers.

Here are two more pictures showing two different hand guards with absolutely identical mold details:

We're mainly focusing here on the little blob in the center of the pictures but compare the edges behind the strengthening plates and other minute details. Clearly, these came from the same mold. I know you probably couldn't care less but I think this stuff is neat!

Although the same molds were used, I did find a slight difference and is was, once again on the handguard with the different nose cap and shiny heat shield. On that one, there is a a squared notch along the top towards the rear where it rests against the side of the receiver. On the other four, that notch is relieved and the contour is angled instead. They were molded that way, not ground so there must have been a change made to the mold at some point. This leads me to believe that the different handguard is earlier production than the other four. In the picture below, the different "earlier" one is depicted at the bottom:

Here are two first patterns compared to a second pattern:

Three handguards, three shades of green.

Rear ends compared:

The second pattern exhibits better heat dissipation, is simpler in design from an overall manufacturing standpoint, is built of fewer parts and is much easier to install and remove from the rifle. However, the polymer part on the second pattern required a MUCH more sophisticated mold. To me, it's clear that the second pattern must have taken less time to assemble and cost less to produce too.

Front ends compared:

Top rear view:

Gee, I wonder where Spain got their inspiration from?

To be fair, both the HK33/93 and CETME L are of such similar mechanical design to begin with, it IS only logical that you might arrive at a similar form with regards to furniture design too.
I ain't too bright!
Forums are for furthering knowledge, not bragging about what you've got.
Combloc is online now   Reply With Quote
Old Yesterday, 22:28   #57
FALaholic #: 55596
Join Date: Aug 2010
Location: Maryland
Posts: 932
So let's see what the first pattern actually looks like installed. This picture shows a MarColMar with one fitted and an HMG AMG with the second pattern:

I'd like to show you a picture with one installed on the HMG rifle but, despite my trying all five handguards and spending a half hour doing it, I simply could not make one fit. No matter how much I fiddled with it, I couldn't get any of the handguards to slide far enough to the rear for the mounting pin holes to align with the corresponding hole through the front sight base. So while I can pretty much guarantee you that one of these will fit your MCM CETME L, I cant say the same about the HMG offering. Now, you can probably grind the rear mounting point on the handguard down until it fits but that's not something I'm willing to experiment with on an accessory that's made of near unobtainium. Your mileage may vary.

Installed on a MCM rifle:

I should touch on what it takes to install one of these things on your rifle. The second pattern handguard is notoriously fiddly to install and remove and this one is no different. It's almost as if the Spanish didn't finalize the design and someone said "Good enough. I'm tired of messing with it." And of course, I have no literature telling me the proper way to install this on a rifle so my method was arrived at by experimentation. Having said that, take the following with a grain of salt. Here's what worked best for me.

1. Hold handguard at a 45 degree angle to rifle with rear of handguard higher than front.
2. Place rear of handguard over barrel. Slide to the rear while engaging rear mounting point with front of trunnion.
3 Wrap hand around top of trunnion and bottom rear of handguard. While squeezing rear tightly, rotate front of handguard up and over front sight base while pushing entire assembly to the rear, thus lining up handguard mounting holes with hole in front sight base.
4. Insert mounting pin until seated.

1. Remove mounting pin.
2. Rotate sling mounting ring up and out of the way.
3. Pull handguard forward as far as it will go.
4. Pull rear of handguard down until it is clear of trunnion. It will flex as it passes over the trunnion.
5. Continue to rotate rear of handguard down while also pulling entire assembly down and to the rear until it pulls off the front sight base.

While thee above sounds straight forward, you'll find it can be a fidgety process getting it up over the front sight base during assembly. It can also be a bear during installation getting it far enough to the rear for the pin holes to line up. In fact, I had to hold the rifle by the handguard and bump it on the floor several times to get it to seat properly. It helps if you're squeezing the rear tight onto the trunnion while doing this. It got easier after a few times on and off but it's still enough of a fight getting it on that I have no desire to remove it for a while. I think the main problem is getting the mounting ring to pop into the front of the trunnion. As I said, I never could get it fully seated on the HMG rifle. This just might be another reason the entire assembly was redesigned. Still, it WILL seat with a little work and I think it looks pretty nifty. Being that it's flat on the bottom, it should be pretty stable on a rest at the range too.

These last photos just show details of how nicely it fits the contours on the HMG rifle:

Notice that the Cetakote on the rifle is an almost exact match with the original Spanish paint on the rivets. Nice!

The little angled feature on the handguard near the end of the charging slot is what we were previously comparing to the same feature only squared off on what I believe is an earlier version of the first pattern handguard.

This concludes the first ever detailed look at a first pattern handguard for the CETME L rifle. MarColMar discovered only a small number of these and I wouldn't be surprised if this is the one and only time these will ever be available in what is essentially new and unissued condition. I can tell you that, despite my best efforts, I've never been able to find one before in any condition beat up or otherwise so I was absolutely delighted to have the opportunity to get these pristine examples. They aren't cheap but MarColMar says they had to shell out quite a bit of dough to get them in the first place because the source in Spain knew what they had and how rare they are. In my opinion, if you have a CETME L for collecting purposes, you really need to buy one of these because this may well be the only time you ever see one for sale. Likewise, shooters will enjoy this model because the flat bottom will set very stable on a rest. So whether you are a shooter or a collector, this extremely rare first patter handguard is likely one of the nicest CETME L accessories you're going to find.
I ain't too bright!
Forums are for furthering knowledge, not bragging about what you've got.
Combloc is online now   Reply With Quote
Old Today, 00:46   #58
FALaholic #: 80384
Join Date: Nov 2017
Location: Owensboro
Posts: 83
Thanks for the great write up. I was on the pre order list for one of these rifles but ended up passing when they were released as I was concentrating on FALs. Not that I have read this thread I regret my decision to pass. I am much more likely to buy one now.
HenryIV is online now   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -5. The time now is 08:53.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
©1998-2018 The FAL Files