Speedfeed Stocks: Discontinued?

ByronF · April 11, 2018, 05:38

Thinking to sell my 870 set (probably 15 yr old) and have no idea what I paid for it, or what they go for today. Anyone know the scoop?

Despite the name there is nothing speedy about getting rounds out of the buttstock. Not cumbersome or difficult, but not "3-gun" fast. It's a good place to keep slugs while the tube is stuffed with buck. Faster than going back to the truck for some slugs.

Byron

**gunplumber** · April 11, 2018, 07:22

Davis sold Speed Feed to someone else. I bought some of the standard ones (no shell carrier) because they have a shorter youth length which I prefer. I think the stocks were around $65 each. It adds zero to the value of the shotgun for resale. Used 870s (express) run $250-$350 around here. Few will pay more for a wingmaster.

ByronF · April 11, 2018, 08:36

Thanks, Mark.

Not selling the shotgun, just the stock set.

**gunplumber** · April 11, 2018, 08:50

Apex has the shell carrier in used G-VG for $35 So I'd say $50 if you have the fore-end as well

https://www.apexgunparts.com/remingt...very-good.html

GOVT1911 · April 14, 2018, 17:53

The speed feed on my 590a1 is comfortable, but the right side of it elects the 2 sheds about 80% of the time when I fire. I guess the inertia causes the shells to move and come off of the lip that holds them in. I just don’t use that side of it.

**yellowhand** · April 14, 2018, 19:02

Quote:

Originally Posted by gunplumber

Apex has the shell carrier in used G-VG for $35 So I'd say $50 if you have the fore-end as well

https://www.apexgunparts.com/remingt...very-good.html

Thanks for the heads up, been looking for one of these for my Police magnum marked 870.

**John Crusher** · April 14, 2018, 19:44

Quote:

Originally Posted by yellowhand

Thanks for the heads up, been looking for one of these for my Police magnum marked 870.

Ditto, got one ordered now.

Thanks, John.

yovinny · April 15, 2018, 01:28

Ive got one that came on a mossy 500 combo with riot and bird bbls, from at least the early 90's, or whenever it was they first came out.
Its mostly lived in my work trucks since and has had countless cases of rounds through it, most all of it full house 2 3/4" buck or slugs.
Hasent seen much frequent use in years, outside of being fired empty, cleaned and reloaded yearly, since I mostly shoot other things, but I havent had a single problem with it ejecting rounds or any other issue..

**ArtBanks** · April 15, 2018, 07:36

Quote:

Originally Posted by GOVT1911

The speed feed on my 590a1 is comfortable, but the right side of it elects the 2 sheds about 80% of the time when I fire. I guess the inertia causes the shells to move and come off of the lip that holds them in. I just don’t use that side of it.

Same thing on my A1. Opted to get rid of the speed feed stock so I wouldn't be tempted to use it again. Happy camper with a few slugs in my jacket pocket.

April 11, 2018, 05:38	#1
ByronF Registered FALaholic #: 630 Join Date: Aug 2000 Location: PA Posts: 4,074	Speedfeed Stocks: Discontinued? Thinking to sell my 870 set (probably 15 yr old) and have no idea what I paid for it, or what they go for today. Anyone know the scoop? Despite the name there is nothing speedy about getting rounds out of the buttstock. Not cumbersome or difficult, but not "3-gun" fast. It's a good place to keep slugs while the tube is stuffed with buck. Faster than going back to the truck for some slugs. Byron

April 11, 2018, 07:22	#2
gunplumber Arrogant Bastard Gold Contributor FALaholic #: 96 Join Date: Jul 2000 Location: Surprise, AZ Posts: 24,287	Davis sold Speed Feed to someone else. I bought some of the standard ones (no shell carrier) because they have a shorter youth length which I prefer. I think the stocks were around $65 each. It adds zero to the value of the shotgun for resale. Used 870s (express) run $250-$350 around here. Few will pay more for a wingmaster. __________________ T. Mark Graham, Master Gunsmith Arizona Response Systems, LLC

April 11, 2018, 08:50	#4
gunplumber Arrogant Bastard Gold Contributor FALaholic #: 96 Join Date: Jul 2000 Location: Surprise, AZ Posts: 24,287	Apex has the shell carrier in used G-VG for $35 So I'd say $50 if you have the fore-end as well https://www.apexgunparts.com/remingt...very-good.html __________________ T. Mark Graham, Master Gunsmith Arizona Response Systems, LLC

April 14, 2018, 17:53	#5
GOVT1911 Registered FALaholic #: 9433 Join Date: Feb 2003 Location: Raeford, NC Posts: 3,892	The speed feed on my 590a1 is comfortable, but the right side of it elects the 2 sheds about 80% of the time when I fire. I guess the inertia causes the shells to move and come off of the lip that holds them in. I just don’t use that side of it. __________________ I don't make policy, I just enforce the last 300 Meters of it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

April 11, 2018, 08:36	#3
ByronF Registered FALaholic #: 630 Join Date: Aug 2000 Location: PA Posts: 4,074	Thanks, Mark. Not selling the shotgun, just the stock set.

April 15, 2018, 01:28	#8
yovinny Registered Bronze Contributor FALaholic #: 7679 Join Date: Oct 2002 Location: NY transplant to central Illinois, Now in Kentucky Posts: 5,597	Ive got one that came on a mossy 500 combo with riot and bird bbls, from at least the early 90's, or whenever it was they first came out. Its mostly lived in my work trucks since and has had countless cases of rounds through it, most all of it full house 2 3/4" buck or slugs. Hasent seen much frequent use in years, outside of being fired empty, cleaned and reloaded yearly, since I mostly shoot other things, but I havent had a single problem with it ejecting rounds or any other issue..