The FAL Files  

Go Back   The FAL Files > Discussion Forums > Marketplace

Notices

Reply
 
Thread Tools Display Modes
Old January 11, 2018, 11:39   #1
gunplumber
Arrogant Bastard
Gold Contributor
 
gunplumber's Avatar
 
FALaholic #: 96
Join Date: Jul 2000
Location: Surprise, AZ
Posts: 24,388
--> WTS FAL & L1A1 Parts & Misc oddball stuff (180710)

Cash, check, money order to

T. Mark Graham
16014 W Remuda Drive
Surprise, AZ 85387

or Visa/MC + 3.5% by e-mail only

Shipping $12 USPS priority mail, any quantity or combination.

gunplumber@arizonaresponsesystems.com

----------
L1A1 plastic lower furniture sets w/ hardware $50
Approximately 40 available at this price.

Good-VG original surplus condition, not refinished. May have original regimental markings and/or rack numbers. Normal length buttplate unless you request Short, Long or Extra-Long.




-----

FAL Furniture set IMBEL Bipod cut $50.
FAL Furniture set IMBEL Non Bipod cut $75

Furniture in surplus condition, stocks may have rack numbers. Handguards - I've raised the dents, soldered/replaced loose threaded inserts, and refinished the metal portion. May have small chips not affecting integrity. May have a small crack at the metal/fiberglass junction that does not result in the metal piece being loose. May have a commercial replacement handguard screw. All are completely serviceable.





-----

FAL US Furniture Sets, Penguin Small Arms Works (PSAW) $38.
Approximately 30 sets available at this price.
Handguards only (black) $15
Grip only (black) $10

Sets are new, but may have handling marks. I removed a bunch of the grips from "finished" lowers. Pilot holes are molded in for sling mount. These are locating holes only. You must pre-drill the tang and sling swivel holes before installing screws. Failure to do so may cause the stock to crack. An economical way to get 3 US parts for 922 compliance.


a few green sets.



-----

FAL Para Stock Part set $75.

NEW IMBEL upper & lower arm
NEW IMBEL buttplate drilled & riveted, refinished black
NEW PSAW non-folding rear hinge half
NEW hinge pin
NEW stock bolt (for modified standard lowers)
NEW roll pin for affixing stock arms to rear hinge
NEW upper arm plastic sleeve (Galil)

Missing front hinge half
Missing spring
Missing upper to lower arm plastic spacer



stock or hinge pin only $10 each.
-----

EAI Free Float Handguards $50 Appx 30 available. May have light scuffs/handling marks.



-----

GGG Ultradot 30mm Red dot mount,$25 (appx 30).
Fits Ultradot, Aimpoint, and other 30mm tubes. With spare battery compartment. List $165



-----

GGG AR-15 carry handle rail, 1-9@ $15 or 10+@ $10. (appx 70)



-----

Dutch Army Cleaning Rod. $5 (appx 200)
NSN 1005-17-054-4732
Pompstock, KKW
Koninklyke Landmacht Dmkl-Ressort
CAGE H3348

Thread is M4x0.7. Very close to #6x40 and the same thread as the StG58 cleaning rod. So this may be a good purchaser just to get the brass patch eyelet.



-----

L2A1 bipod, NIW, 1@ $30, 4+@ $25 (appx 30)
New in wrap. I thought they were Aussie, but now I think they might be Canadian, given the wood color.


-----

L1A2 Grenade launcher 1@ $25, 5+@ $20. (appx 100)
Fits L1A1 flash hider. Includes free leather case which may have a broken snap or stitching may be coming undone. Surplus G-VG condition.
limited quantity of NIW, + $20




Second type $35



-----

Swiss PE 57 Cleaning Kit $20 (appx 100)
VG-EXC appears to be complete. Suitable for FAL or any .30 rifle.
- Five-piece segmented cleaning rod with brass guides
- Cleaning rod handle extension
- Bore brush
- Chamber brush
- Jag section
- Inspection mirror
- Two "Automattenfett" grease cans



-----

L1A1 Aussie furniture set, wood. $150
photo is representative sample. Around 20 available



-----
L1A1 Aussie stock hardware set $35
refinished


-----

L1A1 grip, Aussie, wood G-VG $15
stripped and ready for refinish


-----

L1A1 stock, Aussie, wood, G-VG, N, $20
stripped and ready for refinish


--------

L1A1 stock, Royal New Zealand Air Force, wood, G-VG, N, $20
stripped and ready for refinish. Stock inletted for ID disc.



-----
L1A1 Grip hardware set, wood $45
includes everything pictured except for the grip. Grip screw may be small head, large head, or socket type (no choice). grip plate screw is commercial replacement. Only available with purchase of furniture set.


-----

FAL mag loader, surplus condition. $5. 5+ @ $3
image is after cleaning. also fits SCAR-17



------

IMBEL FAL Cleaning Kit, complete $20
IMBEL FAL Cleaning Kit, empty $5
surplus condition, dirty/greasy



-----

AA sights for M2 .50 (Mk26?) soft mount. NIW $40
Mount to your car's hood? Looks like this



------

RRA FAL .223 parts $300. [/B] Free ship on 2nd and subsequent sets, purchased at same time.

Components originally from the RedRock Arms ATR You will have to come up with a mag well adapter. Original used a unique aluminum receiver with no adapter. Uses standard unmodified FAL Lower. All other parts would be standard, unmodified FAL. Absolutely no warranty as to the appropriateness of these parts for anything.
  • .223 barrel, FAL Profile. 16.25" 1-9, 1/2x28. NEW
    gas block & Pin, not installed
  • .223 bolt
  • .223 firing pin
  • extractor modified for .223.
  • ejector (pins to standard e-block)
  • bho with second hole for relocated pin
  • mag catch - paddle type





ATR rifle photos swiped from internet
http://www.redrockarms.com/atr_one_info_page.gif
http://67.media.tumblr.com/5708d83a3...khx4o4_500.jpg

subject to prior sale, I reserve the right to decline sales to anyone at any time for any reason or no reason. This ad is known to the state of California to cause cancer. Do not remove this label under penalty of law.
__________________
T. Mark Graham, Master Gunsmith
Arizona Response Systems, LLC

Last edited by gunplumber; July 10, 2018 at 12:02.
gunplumber is offline   Reply With Quote
Old January 11, 2018, 11:50   #2
gunners
Member
Silver Contributor
 
FALaholic #: 55824
Join Date: Aug 2010
Location: Seattle, Washington
Posts: 259
Mark are the two containers in the PE 57 kit full of "Automattenfett" or empty. It has been getting harder to find them with grease.
gunners is online now   Reply With Quote
Old January 11, 2018, 12:04   #3
gunplumber
Arrogant Bastard
Gold Contributor
 
gunplumber's Avatar
 
FALaholic #: 96
Join Date: Jul 2000
Location: Surprise, AZ
Posts: 24,388
I can't guarantee it. I spot-checked 6. 2 empty, 2 half full, and 2 full. Some kind of gray grease - looked like moly wheel-bearing grease. I believe Jim Rawles said something about these being an earlier import, as US Customs nixed the grease for some reason.
__________________
T. Mark Graham, Master Gunsmith
Arizona Response Systems, LLC
gunplumber is offline   Reply With Quote
Old January 11, 2018, 16:36   #4
yellowhand
Dinosaur
Silver Contributor
 
FALaholic #: 67949
Join Date: Nov 2012
Location: Sierra Vista AZ
Posts: 18,134
Mark, what else would be needed to convert one of mine over to a folding stock???

FAL Para Stock Part set
__________________
You may find me dead in a ditch one day, on my knees, but I will be up to my waist in spent rifle brass.

It ain't the firearms they are wanting to be rid of, its you!
yellowhand is online now   Reply With Quote
Old January 11, 2018, 17:25   #5
gunplumber
Arrogant Bastard
Gold Contributor
 
gunplumber's Avatar
 
FALaholic #: 96
Join Date: Jul 2000
Location: Surprise, AZ
Posts: 24,388
Quote:
Originally Posted by yellowhand View Post
Mark, what else would be needed to convert one of mine over to a folding stock???

FAL Para Stock Part set
front knuckle
rear knuckle (these are non-folding from the AWB)
hinge spring
stock spacer (optional)
para return spring assy
para top cover
para bolt carrier
para lower.
__________________
T. Mark Graham, Master Gunsmith
Arizona Response Systems, LLC
gunplumber is offline   Reply With Quote
Old January 11, 2018, 18:05   #6
gulfstream driver
Registered
 
FALaholic #: 51159
Join Date: Jan 2010
Location: Sebastian Fl
Posts: 37
Para build

Mark,
Is the front knuckle available anywhere?
gulfstream driver is online now   Reply With Quote
Old January 11, 2018, 18:12   #7
gunplumber
Arrogant Bastard
Gold Contributor
 
gunplumber's Avatar
 
FALaholic #: 96
Join Date: Jul 2000
Location: Surprise, AZ
Posts: 24,388
Quote:
Originally Posted by gulfstream driver View Post
Mark,
Is the front knuckle available anywhere?
No, if it was, I'd buy them, finish out the assemblies and triple the price.
__________________
T. Mark Graham, Master Gunsmith
Arizona Response Systems, LLC
gunplumber is offline   Reply With Quote
Old January 11, 2018, 18:14   #8
yellowhand
Dinosaur
Silver Contributor
 
FALaholic #: 67949
Join Date: Nov 2012
Location: Sierra Vista AZ
Posts: 18,134
Quote:
Originally Posted by gunplumber View Post
front knuckle
rear knuckle (these are non-folding from the AWB)
hinge spring
stock spacer (optional)
para return spring assy
para top cover
para bolt carrier
para lower.
I'm sure the answer is no, but will ask anyway, do ya have all this other stuff or would I need to search around and locate it?

You know me, I'd just send you a big old bag of parts and get back a rifle to shoot.
__________________
You may find me dead in a ditch one day, on my knees, but I will be up to my waist in spent rifle brass.

It ain't the firearms they are wanting to be rid of, its you!
yellowhand is online now   Reply With Quote
Old January 11, 2018, 18:15   #9
yellowhand
Dinosaur
Silver Contributor
 
FALaholic #: 67949
Join Date: Nov 2012
Location: Sierra Vista AZ
Posts: 18,134
Quote:
Originally Posted by gunplumber View Post
No, if it was, I'd buy them, finish out the assemblies and triple the price.
I just answered me question.
__________________
You may find me dead in a ditch one day, on my knees, but I will be up to my waist in spent rifle brass.

It ain't the firearms they are wanting to be rid of, its you!
yellowhand is online now   Reply With Quote
Old February 18, 2018, 14:40   #10
CTW
Registered
 
CTW's Avatar
 
FALaholic #: 41894
Join Date: Jan 2009
Location: Florida
Posts: 2,102
Mark I’ll take a stripped Aussie pistol grip and an Aussie stock hardware set refinished. Thanks
__________________
ΜΟΛΩΝ ΛΑΒΕ
CTW is online now   Reply With Quote
Old February 21, 2018, 21:42   #11
Tumtatty
Registered
 
FALaholic #: 80703
Join Date: Feb 2018
Location: Kernersville, NC
Posts: 2
Will These ("FAL US Furniture Sets, Penguin Small Arms Works (PSAW)") fit a metric FAL (sorry, I'm new)?
If so I'd like a green set.
Tumtatty is offline   Reply With Quote
Old February 21, 2018, 22:08   #12
Widgt
Registered
 
FALaholic #: 67813
Join Date: Nov 2012
Location: Lawrence, Kansas
Posts: 219
I’ll take 1 GGG ultradot mount and 1 carry handle mount.
__________________
"Because without beer, things do not seem to go as well." Diary of Brother Epp, Capuchin monastery, Munjor Kansas 1902
Widgt is online now   Reply With Quote
Old February 22, 2018, 08:00   #13
gunplumber
Arrogant Bastard
Gold Contributor
 
gunplumber's Avatar
 
FALaholic #: 96
Join Date: Jul 2000
Location: Surprise, AZ
Posts: 24,388
Quote:
Originally Posted by Tumtatty View Post
Will These ("FAL US Furniture Sets, Penguin Small Arms Works (PSAW)") fit a metric FAL (sorry, I'm new)?
If so I'd like a green set.
yes
__________________
T. Mark Graham, Master Gunsmith
Arizona Response Systems, LLC
gunplumber is offline   Reply With Quote
Old March 02, 2018, 02:45   #14
Darrenmn
Registered
 
FALaholic #: 77565
Join Date: Mar 2016
Location: minneapolis mn 55418
Posts: 24
FAL US Furniture Sets, Penguin Small Arms Works (PSAW) $38

FAL US Furniture Sets, Penguin Small Arms Works (PSAW) $38 I will take a green set how would you like me to pay you ?
Darrenmn is offline   Reply With Quote
Old March 02, 2018, 08:04   #15
gunplumber
Arrogant Bastard
Gold Contributor
 
gunplumber's Avatar
 
FALaholic #: 96
Join Date: Jul 2000
Location: Surprise, AZ
Posts: 24,388
Quote:
Originally Posted by Darrenmn View Post
FAL US Furniture Sets, Penguin Small Arms Works (PSAW) $38 I will take a green set how would you like me to pay you ?
in the manner stated in the listing. thanks.
__________________
T. Mark Graham, Master Gunsmith
Arizona Response Systems, LLC
gunplumber is offline   Reply With Quote
Old April 07, 2018, 14:55   #16
Capt D
Farkin' Sneekee Bastitch
Bronze Contributor
 
Capt D's Avatar
 
FALaholic #: 76457
Join Date: Aug 2015
Location: Cajun Country
Posts: 2,028
I will take L2A1 bipod, NIW, 1@ $30 -- email sent shortly
__________________
COBC #66
‘Need’ now means wanting someone else’s money. ‘Greed’ means wanting to keep your own. ‘Compassion’ is when a politician arranges the transfer. --J. Sobran
Capt D is online now   Reply With Quote
Old April 07, 2018, 20:55   #17
Grahamneall
Senior Member
Gold Contributor
 
FALaholic #: 62175
Join Date: Dec 2010
Location: Austin, Texas
Posts: 620
'I'll take it'
Swiss PE 57 Cleaning Kit
$20

Graham
Tx
Grahamneall is online now   Reply With Quote
Old April 08, 2018, 13:01   #18
Grahamneall
Senior Member
Gold Contributor
 
FALaholic #: 62175
Join Date: Dec 2010
Location: Austin, Texas
Posts: 620
Mark......I'll take another of the Swiss Cleaning kits:
Two in total ($20) each.
Maybe find those with full grease bottles ??
PM inbound.

Cheers,
Graham
Tx
Grahamneall is online now   Reply With Quote
Old April 08, 2018, 13:06   #19
Grahamneall
Senior Member
Gold Contributor
 
FALaholic #: 62175
Join Date: Dec 2010
Location: Austin, Texas
Posts: 620
I'll Take it:
Imbel Cleaning Kit, Complete ($20)
PM inbound

Cheers,

Graham.
Grahamneall is online now   Reply With Quote
Old April 15, 2018, 20:34   #20
azfal1
Member
Silver Contributor
 
FALaholic #: 43095
Join Date: Mar 2009
Location: Arizona
Posts: 170
I’ll take 2 Ultradot rings
azfal1 is offline   Reply With Quote
Old April 19, 2018, 08:38   #21
Grahamneall
Senior Member
Gold Contributor
 
FALaholic #: 62175
Join Date: Dec 2010
Location: Austin, Texas
Posts: 620
L1A1 grip, Aussie, wood G-VG $15
stripped and ready for refinish

L1A1 stock, Aussie, wood, G-VG, N, $20
stripped and ready for refinish

I'll take one of each.

Graham
Tx
Grahamneall is online now   Reply With Quote
Old April 29, 2018, 20:02   #22
Lear70
Veteran Member
Silver Contributor
 
FALaholic #: 68708
Join Date: Jan 2013
Location: Nashville, TN
Posts: 1,887
Hey Mark, any Izzy stuff?
Lear70 is offline   Reply With Quote
Old April 30, 2018, 07:58   #23
gunplumber
Arrogant Bastard
Gold Contributor
 
gunplumber's Avatar
 
FALaholic #: 96
Join Date: Jul 2000
Location: Surprise, AZ
Posts: 24,388
Quote:
Originally Posted by Lear70 View Post
Hey Mark, any Izzy stuff?
This Fal Files marketplace ad, offers specific items for sale at specific prices. There are no izzy items in this ad.

My website also has items for sale. Prices may be slightly higher than this listing. It includes an Israeli section, that may or may not have items that you may or may not want to buy.

I hope this answer is as useful as your question.

https://www.arizonaresponsesystems.com/store/store.html
__________________
T. Mark Graham, Master Gunsmith
Arizona Response Systems, LLC
gunplumber is offline   Reply With Quote
Old April 30, 2018, 15:49   #24
Grahamneall
Senior Member
Gold Contributor
 
FALaholic #: 62175
Join Date: Dec 2010
Location: Austin, Texas
Posts: 620
L1A1 Aussie stock hardware set $35
refinished


I'll Take it.

You have all my info...

Thanks,
Graham.
Grahamneall is online now   Reply With Quote
Old April 30, 2018, 20:15   #25
Lear70
Veteran Member
Silver Contributor
 
FALaholic #: 68708
Join Date: Jan 2013
Location: Nashville, TN
Posts: 1,887
Quote:
Originally Posted by gunplumber View Post
This Fal Files marketplace ad, offers specific items for sale at specific prices. There are no izzy items in this ad.
I'm aware of that, that's why I asked if you had any.

Quote:
My website also has items for sale. Prices may be slightly higher than this listing. It includes an Israeli section, that may or may not have items that you may or may not want to buy.

I hope this answer is as useful as your question.

https://www.arizonaresponsesystems.com/store/store.html
Depends on your point of view.

Thanks?
Lear70 is offline   Reply With Quote
Old May 22, 2018, 16:05   #26
Tattered
Registered FAL offender
Contributor
 
Tattered's Avatar
 
FALaholic #: 14096
Join Date: Apr 2004
Location: Ohio
Posts: 323
I'll take 2 of the L2A1 bipods, NIW, 1@ $30

email to follow
Tattered is online now   Reply With Quote
Old July 10, 2018, 12:02   #27
gunplumber
Arrogant Bastard
Gold Contributor
 
gunplumber's Avatar
 
FALaholic #: 96
Join Date: Jul 2000
Location: Surprise, AZ
Posts: 24,388
bump
__________________
T. Mark Graham, Master Gunsmith
Arizona Response Systems, LLC
gunplumber is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 19:20.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
©1998-2018 The FAL Files