WTT/WTS: REDUCED-- Stripped, Reparked Israeli Lower - REDUCED to $118 PPD. to CONUS

**Rawles** · January 31, 2019, 19:51

Update, Feb 20th: G1 Lower has sold But the Izzy lower is still available, and reduced.

I'm looking to trade or sell two metric FAL lowers, which are now excess to my needs:

1.) A scarce stripped re-welded, and re-Parkerized Israeli metric FAL lower. This is and unserialzed lower that still has nice clear Hebrew markings. It is medium dark gray Parkerized, which should match most Israeli parts sets. It is now about 95%, since re-Parking. It only shows wear on the high points, at the pivot point, and a typical selector switch drag mark. Only a purist would want to give it another Park job before a build. It has internal lightening cuts, so I assume that it is a Type II. (But I'm not certain.) Re-Reduced to $118 in trade value, or cash.

SOLD: 2.) A nearly complete West German G1 FAL lower half. It is currently wearing a nasty U.S. ban era compliance thumbhole stock and has no recoil pad, recoil pad screw, or main pivot screw set. But otherwise, it is complete. Overall, it looks great, but I should mention that the selector switch and takedown lever are a darker shade of black than the lower itself. The rear sight has very nice "2-3-4-5-6" white-filled numbering. The lower markings are "S" "E" and an odd stylized "D", which I've been told are standard for G1 rifles. The recoil plate only shows one VERY small dent. The metal finish is 99% except for the trigger, which is 95%, and the hammer, which is 80%. There is no need to refinish this lower! It includes a recoil spring assembly and a complete set of pistol grip/triggerguard guts, with black popsicle stick. The thumbhole stock is of course a throwaway, but if you can find a nice metric pistol grip, buttstock, and recoil pad, then you will have a quite nice and very low-mileage lower for your next build! Semi-complete G1 lowers are getting scarce. Re-Reduced to $275 in trade value, or cash.

If these are cash deals, then you will pay the postage. But if it is a trade, then we'd each pay our respective postage.

No photos available, but if you have Skype, I can show you these lowers close up with my laptop Skype camera.

Sorry, no overseas sales.

Here are some possible trades, in no particular order. I will accept cash, but I prefer to trade:

Windowed 5.56 30-round PMAGs in sand, green, or black. Must be new or excellent.
5.56 40-round PMAGs -- black or sand color.
Galil, R4, Valmet, Steyr AUG, Norinco AK, and other scarce magazines
Glock 21 (.45 ACP) Slide & barrel Assembly, complete. Standard Length. Prefer one that is lightly used and inexpensive. I'm not looking for a complete G21 pistol--I already have a frame.
Glock 21 .45 ACP Long Slide & barrel assembly. Prefer Lone Wolf brand, with or without a threaded barrel. Again, I'm not looking for a complete G21 pistol--I already have a frame.
Chilean Mauser Model 1895 actions (with bolts), or barrelled actions, pre-1899 production marked "Loewe Berlin", only!
M1895 Chilean Mauser Complete Bolts, Firing Pins, and Extractors
Swamp Rat Waki or Rucki knife. Prefer subdued colors.
M4 Flat-Top Uppers with 16" Faxon 5.56 pencil barrels. I'd prefer a stainless barrel with Wylde chamber specs, and with a short or mid-length lightweight gas block. I can provide my own handguards, bolt carrier, flash hider and charging handle.) I might also consider an upper with an 18" or 20" Faxon pencil barrel. And I'd also consider one with a 14.5" pencil barrel if it has a pinned small diameter flash hider.
HK21E/HK23E LMG Vertical Foregrip (aka "Assault Grip"). I'm only looking for one that is original German-made, or made by a HK-licensed contractor.
HK21E/HK23E Picatinny scope rail.
SIG P320 9mm/.40SW Factory-made Striker Assembly.
Factory .450 Bushmaster ammunition -- prefer subsonic.
Wheeler Engineering Mauser Action Wrench
Wheeler Engineering Small Ring Mauser (SRM) Receiver Mandrel
T-C Encore barrels new or used, must be stainless steel in any of these calibers: .22 LR, .223 Remington, .357 Magnum, .45/.410 (also handgun), .450 Bushmaster, 12 Gauge, or .308 Winchester.
Set of 8 Chiappa 12 gauge cartridge (subcaliber) adapter inserts, new or used. I will accept a partial set. (I don't need the .380 ACP or .40 S&W adapters)
Leupold Long Eye Relief ("Scout" type) 119675 VX-R Scout Metric FireDot (lit reticle) Scope, Matte, 1.5-5 x 33mm
Browning A-Bolt .30-06 4-round magazines (for A-Bolt I or A-Bolt II rifles with swing-down floorplates.)
Ruger M77 Mk. II stainless steel extractors and firing pins--need for both short and long action rifles
Remington Model 700 Bolt Disassembly Tool (Prefer Kleinendorst brand)
3 - AR-10 JP Enterprises Flash Hiders (5/8 x 24 RH)
Shrike/FightLite Belt-Fed spare barrels in 10", 12", or 14" length.

Let me know what you have from that list available, and let's swap!

**Thorack** · January 31, 2019, 21:52

Hi,

Is the Izzy lower unserialed?

Thorack

**Rawles** · February 01, 2019, 10:07

Update, Feb 1st: Price reductions.

Ferdman · February 01, 2019, 11:04

Is the Israeli lower a Type I or Type II?

**Rawles** · February 03, 2019, 09:37

To clarify: The Izzy lower is unserialzed.

I've always been an Inch kinda guy, so I'm not certain if it is a Type I versus a Type II. I looked inside and I saw what appear to be internal lightening cuts, so I assume that it is a Type II. But again, I'm not certain.

**Rawles** · February 04, 2019, 09:15

Update, Feb 4th: Further price reductions. How low must I go?

**Rawles** · February 06, 2019, 10:50

More reductions--to well below their going market prices for these lowers.

**Rawles** · February 07, 2019, 17:05

BTT

**Rawles** · February 08, 2019, 09:10

Update, Feb 8th: More price reductions, in the great FALFiles tradition.

**Rawles** · February 09, 2019, 10:59

Another day, another price reduction. With my prices, these should have sold by now.

**Rawles** · February 11, 2019, 19:42

Bump...

**Rawles** · February 13, 2019, 08:37

Another pair of price reductions. These must and will sell.

**Rawles** · February 14, 2019, 09:35

Bump.

**Rawles** · February 14, 2019, 09:37

BTT. Reduced.

**Rawles** · February 15, 2019, 18:59

Friday bump.

**Rawles** · February 17, 2019, 19:59

Sunday bump.

**imacoonass01** · February 17, 2019, 20:19

I will take it.

2.) A nearly complete West German G1 FAL lower half.

**Rawles** · Yesterday, 08:16

Update, Feb 20th: G1 Lower has sold But the Izzy lower is still available, and reduced.

January 31, 2019, 19:51	#1
Rawles Silver Contributor Silver Contributor FALaholic #: 133 Join Date: Jul 2000 Location: The Rawles Ranch--Somewhere in The American Redoubt Posts: 2,146	WTT/WTS: REDUCED-- Stripped, Reparked Israeli Lower - REDUCED to $118 PPD. to CONUS Update, Feb 20th: G1 Lower has sold But the Izzy lower is still available, and reduced. I'm looking to trade or sell two metric FAL lowers, which are now excess to my needs: 1.) A scarce stripped re-welded, and re-Parkerized Israeli metric FAL lower. This is and unserialzed lower that still has nice clear Hebrew markings. It is medium dark gray Parkerized, which should match most Israeli parts sets. It is now about 95%, since re-Parking. It only shows wear on the high points, at the pivot point, and a typical selector switch drag mark. Only a purist would want to give it another Park job before a build. It has internal lightening cuts, so I assume that it is a Type II. (But I'm not certain.) Re-Reduced to $118 in trade value, or cash. SOLD: 2.) A nearly complete West German G1 FAL lower half. It is currently wearing a nasty U.S. ban era compliance thumbhole stock and has no recoil pad, recoil pad screw, or main pivot screw set. But otherwise, it is complete. Overall, it looks great, but I should mention that the selector switch and takedown lever are a darker shade of black than the lower itself. The rear sight has very nice "2-3-4-5-6" white-filled numbering. The lower markings are "S" "E" and an odd stylized "D", which I've been told are standard for G1 rifles. The recoil plate only shows one VERY small dent. The metal finish is 99% except for the trigger, which is 95%, and the hammer, which is 80%. There is no need to refinish this lower! It includes a recoil spring assembly and a complete set of pistol grip/triggerguard guts, with black popsicle stick. The thumbhole stock is of course a throwaway, but if you can find a nice metric pistol grip, buttstock, and recoil pad, then you will have a quite nice and very low-mileage lower for your next build! Semi-complete G1 lowers are getting scarce. Re-Reduced to $275 in trade value, or cash. If these are cash deals, then you will pay the postage. But if it is a trade, then we'd each pay our respective postage. No photos available, but if you have Skype, I can show you these lowers close up with my laptop Skype camera. Sorry, no overseas sales. Here are some possible trades, in no particular order. I will accept cash, but I prefer to trade: Windowed 5.56 30-round PMAGs in sand, green, or black. Must be new or excellent. 5.56 40-round PMAGs -- black or sand color. Galil, R4, Valmet, Steyr AUG, Norinco AK, and other scarce magazines Glock 21 (.45 ACP) Slide & barrel Assembly, complete. Standard Length. Prefer one that is lightly used and inexpensive. I'm not looking for a complete G21 pistol--I already have a frame. Glock 21 .45 ACP Long Slide & barrel assembly. Prefer Lone Wolf brand, with or without a threaded barrel. Again, I'm not looking for a complete G21 pistol--I already have a frame. Chilean Mauser Model 1895 actions (with bolts), or barrelled actions, pre-1899 production marked "Loewe Berlin", only! M1895 Chilean Mauser Complete Bolts, Firing Pins, and Extractors Swamp Rat Waki or Rucki knife. Prefer subdued colors. M4 Flat-Top Uppers with 16" Faxon 5.56 pencil barrels. I'd prefer a stainless barrel with Wylde chamber specs, and with a short or mid-length lightweight gas block. I can provide my own handguards, bolt carrier, flash hider and charging handle.) I might also consider an upper with an 18" or 20" Faxon pencil barrel. And I'd also consider one with a 14.5" pencil barrel if it has a pinned small diameter flash hider. HK21E/HK23E LMG Vertical Foregrip (aka "Assault Grip"). I'm only looking for one that is original German-made, or made by a HK-licensed contractor. HK21E/HK23E Picatinny scope rail. SIG P320 9mm/.40SW Factory-made Striker Assembly. Factory .450 Bushmaster ammunition -- prefer subsonic. Wheeler Engineering Mauser Action Wrench Wheeler Engineering Small Ring Mauser (SRM) Receiver Mandrel T-C Encore barrels new or used, must be stainless steel in any of these calibers: .22 LR, .223 Remington, .357 Magnum, .45/.410 (also handgun), .450 Bushmaster, 12 Gauge, or .308 Winchester. Set of 8 Chiappa 12 gauge cartridge (subcaliber) adapter inserts, new or used. I will accept a partial set. (I don't need the .380 ACP or .40 S&W adapters) Leupold Long Eye Relief ("Scout" type) 119675 VX-R Scout Metric FireDot (lit reticle) Scope, Matte, 1.5-5 x 33mm Browning A-Bolt .30-06 4-round magazines (for A-Bolt I or A-Bolt II rifles with swing-down floorplates.) Ruger M77 Mk. II stainless steel extractors and firing pins--need for both short and long action rifles Remington Model 700 Bolt Disassembly Tool (Prefer Kleinendorst brand) 3 - AR-10 JP Enterprises Flash Hiders (5/8 x 24 RH) Shrike/FightLite Belt-Fed spare barrels in 10", 12", or 14" length. Let me know what you have from that list available, and let's swap! __________________ ~Jim Rawles~ Editor of www.SurvivalBlog.com FALFiles Member #133 Last edited by Rawles; Yesterday at 08:16.

January 31, 2019, 21:52	#2
Thorack Acquisition Corp Dude Bronze Contributor FALaholic #: 748 Join Date: Aug 2000 Location: Omaha, Nebraska, USA Posts: 12,832	Hi, Is the Izzy lower unserialed? Thorack __________________ 1. Whenever you are talking to a woman realize this person was born insane and you will never be surprised. 2. Never let Doctors cut on you unless its life or death and ALWAYS get a second opinion.

February 01, 2019, 10:07	#3
Rawles Silver Contributor Silver Contributor FALaholic #: 133 Join Date: Jul 2000 Location: The Rawles Ranch--Somewhere in The American Redoubt Posts: 2,146	Update, Feb 1st: Price reductions. __________________ ~Jim Rawles~ Editor of www.SurvivalBlog.com FALFiles Member #133

February 01, 2019, 11:04	#4
Ferdman Registered FALaholic #: 21875 Join Date: Nov 2006 Posts: 177	Israeli Lower Is the Israeli lower a Type I or Type II?

February 03, 2019, 09:37	#5
Rawles Silver Contributor Silver Contributor FALaholic #: 133 Join Date: Jul 2000 Location: The Rawles Ranch--Somewhere in The American Redoubt Posts: 2,146	To clarify: The Izzy lower is unserialzed. I've always been an Inch kinda guy, so I'm not certain if it is a Type I versus a Type II. I looked inside and I saw what appear to be internal lightening cuts, so I assume that it is a Type II. But again, I'm not certain. __________________ ~Jim Rawles~ Editor of www.SurvivalBlog.com FALFiles Member #133 Last edited by Rawles; February 04, 2019 at 10:30.

February 04, 2019, 09:15	#6
Rawles Silver Contributor Silver Contributor FALaholic #: 133 Join Date: Jul 2000 Location: The Rawles Ranch--Somewhere in The American Redoubt Posts: 2,146	Update, Feb 4th: Further price reductions. How low must I go? __________________ ~Jim Rawles~ Editor of www.SurvivalBlog.com FALFiles Member #133

February 06, 2019, 10:50	#7
Rawles Silver Contributor Silver Contributor FALaholic #: 133 Join Date: Jul 2000 Location: The Rawles Ranch--Somewhere in The American Redoubt Posts: 2,146	More reductions--to well below their going market prices for these lowers. __________________ ~Jim Rawles~ Editor of www.SurvivalBlog.com FALFiles Member #133

February 07, 2019, 17:05	#8
Rawles Silver Contributor Silver Contributor FALaholic #: 133 Join Date: Jul 2000 Location: The Rawles Ranch--Somewhere in The American Redoubt Posts: 2,146	BTT __________________ ~Jim Rawles~ Editor of www.SurvivalBlog.com FALFiles Member #133

February 08, 2019, 09:10	#9
Rawles Silver Contributor Silver Contributor FALaholic #: 133 Join Date: Jul 2000 Location: The Rawles Ranch--Somewhere in The American Redoubt Posts: 2,146	Update, Feb 8th: More price reductions, in the great FALFiles tradition. __________________ ~Jim Rawles~ Editor of www.SurvivalBlog.com FALFiles Member #133

February 09, 2019, 10:59	#10
Rawles Silver Contributor Silver Contributor FALaholic #: 133 Join Date: Jul 2000 Location: The Rawles Ranch--Somewhere in The American Redoubt Posts: 2,146	Another day, another price reduction. With my prices, these should have sold by now. __________________ ~Jim Rawles~ Editor of www.SurvivalBlog.com FALFiles Member #133

February 11, 2019, 19:42	#11
Rawles Silver Contributor Silver Contributor FALaholic #: 133 Join Date: Jul 2000 Location: The Rawles Ranch--Somewhere in The American Redoubt Posts: 2,146	Bump... __________________ ~Jim Rawles~ Editor of www.SurvivalBlog.com FALFiles Member #133

February 13, 2019, 08:37	#12
Rawles Silver Contributor Silver Contributor FALaholic #: 133 Join Date: Jul 2000 Location: The Rawles Ranch--Somewhere in The American Redoubt Posts: 2,146	Another pair of price reductions. These must and will sell. __________________ ~Jim Rawles~ Editor of www.SurvivalBlog.com FALFiles Member #133

February 14, 2019, 09:35	#13
Rawles Silver Contributor Silver Contributor FALaholic #: 133 Join Date: Jul 2000 Location: The Rawles Ranch--Somewhere in The American Redoubt Posts: 2,146	Bump. __________________ ~Jim Rawles~ Editor of www.SurvivalBlog.com FALFiles Member #133

February 14, 2019, 09:37	#14
Rawles Silver Contributor Silver Contributor FALaholic #: 133 Join Date: Jul 2000 Location: The Rawles Ranch--Somewhere in The American Redoubt Posts: 2,146	BTT. Reduced. __________________ ~Jim Rawles~ Editor of www.SurvivalBlog.com FALFiles Member #133

February 15, 2019, 18:59	#15
Rawles Silver Contributor Silver Contributor FALaholic #: 133 Join Date: Jul 2000 Location: The Rawles Ranch--Somewhere in The American Redoubt Posts: 2,146	Friday bump. __________________ ~Jim Rawles~ Editor of www.SurvivalBlog.com FALFiles Member #133

February 17, 2019, 19:59	#16
Rawles Silver Contributor Silver Contributor FALaholic #: 133 Join Date: Jul 2000 Location: The Rawles Ranch--Somewhere in The American Redoubt Posts: 2,146	Sunday bump. __________________ ~Jim Rawles~ Editor of www.SurvivalBlog.com FALFiles Member #133

February 17, 2019, 20:19	#17
imacoonass01 Veteran Member Silver Contributor FALaholic #: 80275 Join Date: Nov 2017 Location: Vidor, TX Posts: 1,417	I will take it. 2.) A nearly complete West German G1 FAL lower half. __________________ “You may all go to hell and I will go to Texas.” - - Davy Crockett

Yesterday, 08:16	#18
Rawles Silver Contributor Silver Contributor FALaholic #: 133 Join Date: Jul 2000 Location: The Rawles Ranch--Somewhere in The American Redoubt Posts: 2,146	Update, Feb 20th: G1 Lower has sold But the Izzy lower is still available, and reduced. __________________ ~Jim Rawles~ Editor of www.SurvivalBlog.com FALFiles Member #133

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode