The FAL Files  

Go Back   The FAL Files > Discussion Forums > Marketplace

Notices

Reply
 
Thread Tools Display Modes
Old September 06, 2019, 10:40   #1
lockjaw
Registered
Contributor
 
FALaholic #: 64904
Join Date: Dec 2011
Location: michigan
Posts: 1,499
A few quality AR-15 barrels - Krieger, Larue and Colt

Here are a few quality AR barrels that I had aside over the past couple years. These will build into kick ass rifles. No garbage, no smoke screens, no BS, if the barrel isn't as described, send back for a refund. Here is an opportunity to buy some top shelf barrels for the coin of budget.
Shipping will be the cost of appropriate flat rate USPS Priority box.

I accept discrete PP, check or money order.

If you buy a barrel and need a USGI barrel nut/delta ring assembly and/or mil-spec gas tube, I can square you away for cheap.

Please post "I'll take it" to avoid any hassles, thank you.

1. Krieger custom profile rifle length 1-9 twist barrel. Rifle length gas system. This barrel came from an expensive rifle build. I do not know the round count, but based upon condition of donated rifle, the round count was trivial. This would make for a kick ass varmint barrel. $250 ($450+ new, and you will have to wait).

SOLD to W.E.G. LaRue PredatAR 16" barrel, midlength gas system, M4 feed ramps. I purchased this barrek new, and ran exactly 90 rounds of Federal LE223T3 ammo through it. Impressively accurate little barrel, nice balance... of course, everyone knows that. I disassembled because I didn't care for the handguard that I used for the build, never got around to rebuilding. $150 (these run $245 new with M4 feed ramps). $150 (sells for $245 new).

3. Colt USGI M4 14.5" carbine barrel. Of course, M4 feed ramps, 1/7 twist, carbine gas system. Barrel was pinned for an FSB, no FSB included. Dated 08/13. Throw a low profile gas block, float it, and will have a fun and potent carbine. Very clean, bore is awesome. Unknown round count, but there is almost no finish wear to the chamber, where the bolt carrier makes contact. $150

__________________
“Do right. Do your best. Treat others as you want to be treated.” ― Lou Holtz

Last edited by lockjaw; September 06, 2019 at 18:54.
lockjaw is offline   Reply With Quote
Old September 06, 2019, 13:25   #2
W.E.G.
FAL Files Administrator
Silver Contributor
 
W.E.G.'s Avatar
 
FALaholic #: 1211
Join Date: Oct 2000
Location: Virginia
Posts: 40,740
I will take the LaRue PredatAR 16" barrel.

PM inbound.
__________________
.
.
.

Ask me about the Mason-Dixon FAL Collectors Association.
W.E.G. is offline   Reply With Quote
Old September 06, 2019, 18:26   #3
STGguy
Registered
 
FALaholic #: 81733
Join Date: Nov 2018
Location: Charlotte/ NC
Posts: 310
Shoot.... 2nds on the LaRue!

Quote:
Originally Posted by W.E.G. View Post
I will take the LaRue PredatAR 16" barrel.

PM inbound.
2nds if anything goofs up on the LaRue..

Last edited by STGguy; September 06, 2019 at 19:46.
STGguy is online now   Reply With Quote
Old September 11, 2019, 04:48   #4
lockjaw
Registered
Contributor
 
FALaholic #: 64904
Join Date: Dec 2011
Location: michigan
Posts: 1,499
__________________
“Do right. Do your best. Treat others as you want to be treated.” ― Lou Holtz
lockjaw is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 12:50.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
©1998-2018 The FAL Files