Looking for charging handle

StormWerkz · February 08, 2018, 17:55

Anyone have a spare charging handle(factory or aftermarket) for the K2/DR200 ?
A customer had his factory handle crack off.

vorgain · February 08, 2018, 21:40

I've got an extra stock one I'll let go of.

StormWerkz · February 08, 2018, 22:07

PM sent

**James** · February 19, 2018, 19:54

My original split like many others. I bought the replacement big knob from Derek. That was POS. I finally had a machine shop make one out of steel.

Don't really know how much it cost as it was in lump with a lot of work on several different jobs. Really doesn't matter as now it;s fix for good.

James

StormWerkz · February 20, 2018, 12:45

I wish it was only the plastic that broke off, it was the metal that broke on my customers charging handle.

Your steel knob looks pretty good.

Quote:

Originally Posted by James

My original split like many others. I bought the replacement big knob from Derek. That was POS. I finally had a machine shop make one out of steel.

Don't really know how much it cost as it was in lump with a lot of work on several different jobs. Really doesn't matter as now it;s fix for good.

James

mountainman · February 20, 2018, 19:56

Are these really all that hard to come across?

**James** · February 21, 2018, 00:31

Quote:

Originally Posted by mountainman

Are these really all that hard to come across?

I really don't know how hard they are to come by but I know if a empty case hits the original just right it splits it into two even pieces. The non factory replacements I don't think are very good at least mine wasn't.

James

vandal968 · February 22, 2018, 12:35

Can someone with one of the broken charging handles from Derek please post a good picture. There was an early style which was before my time and a later style that I produced for him. I'd like to know which version failed.

cheers,
c

StormWerkz · February 22, 2018, 13:22

Quote:

Originally Posted by vandal968

Can someone with one of the broken charging handles from Derek please post a good picture. There was an early style which was before my time and a later style that I produced for him. I'd like to know which version failed.

cheers,
c

Are you going to make another run of them ?

vandal968 · February 23, 2018, 15:45

Quote:

Originally Posted by StormWerkz

Are you going to make another run of them ?

Not if they break, but if the ones that I did are holding-up well, then sure. That's why I'd like to see a picture, so I can tell which version broke.

cheers,
c

vorgain · February 23, 2018, 22:12

Quote:

Originally Posted by vandal968

Not if they break, but if the ones that I did are holding-up well, then sure. That's why I'd like to see a picture, so I can tell which version broke.

cheers,
c

I'll take a picture of the one I have that's made it through at least 5k rounds of moderate to hard use training classes. It's held up splendidly.

vorgain · February 24, 2018, 09:56

Here's the one I have.

https://i.imgur.com/2vGSAsp.jpg

vandal968 · February 24, 2018, 13:14

Quote:

Originally Posted by vorgain

I'll take a picture of the one I have that's made it through at least 5k rounds of moderate to hard use training classes. It's held up splendidly.

Vorgain,
that's one of mine, thank you for posting the picture. The ones that I made mimic the shape of the oem handle but are larger. The earlier ones that I did not make were more barrel shaped and had two grooves machined into them rather the single wide narrow waist of the oem style.

Glad to hear that yours is holding-up well. Derek tested the ones that I made with a few hundred rounds of full-auto fire to make sure that they would be sturdy enough before he started ordering them for sale. (He's an SOT)

I'm still hoping to see some broken ones to make sure that all failures were the early style. Those are probably not as strong as the ones I did since they were made in a completely different way.

cheers,
c

StormWerkz · February 25, 2018, 15:46

I get the occasional request for the charging handles, let us know when you have more made so I can refer them to you.
Since you are going to make them I won't bother

-Josh

Quote:

Originally Posted by vandal968

Vorgain,
that's one of mine, thank you for posting the picture. The ones that I made mimic the shape of the oem handle but are larger. The earlier ones that I did not make were more barrel shaped and had two grooves machined into them rather the single wide narrow waist of the oem style.

Glad to hear that yours is holding-up well. Derek tested the ones that I made with a few hundred rounds of full-auto fire to make sure that they would be sturdy enough before he started ordering them for sale. (He's an SOT)

I'm still hoping to see some broken ones to make sure that all failures were the early style. Those are probably not as strong as the ones I did since they were made in a completely different way.

cheers,
c

retired 1 · February 26, 2018, 02:53

It would be nice to have a spare in case the original breaks.

veprk5.45 · February 28, 2018, 22:48

I'm also looking for a replacement charging handle. Barely 24 hours of owning it , havent even fired it and broke it. Stuck dummy round, and as a 15 year ak guy I smacked the charged handle..and snap

February 08, 2018, 17:55	#1
StormWerkz Registered FALaholic #: 20404 Join Date: Jul 2006 Location: Superior, Wisconsin Posts: 239	Looking for charging handle Anyone have a spare charging handle(factory or aftermarket) for the K2/DR200 ? A customer had his factory handle crack off.

February 19, 2018, 19:54	#4
James Veteran Member Silver Contributor FALaholic #: 642 Join Date: Aug 2000 Location: Dallas, TX, USA Posts: 1,842	My original split like many others. I bought the replacement big knob from Derek. That was POS. I finally had a machine shop make one out of steel. Don't really know how much it cost as it was in lump with a lot of work on several different jobs. Really doesn't matter as now it;s fix for good. James __________________ Hey guys, watch this!

February 20, 2018, 19:56	#6
mountainman Registered FALaholic #: 14702 Join Date: Jun 2004 Location: Deltona FL Posts: 4,417	Are these really all that hard to come across? __________________ PM me if you need something not advertised for sale.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

February 08, 2018, 21:40	#2
vorgain Registered FALaholic #: 76615 Join Date: Sep 2015 Location: NH Posts: 16	I've got an extra stock one I'll let go of.

February 08, 2018, 22:07	#3
StormWerkz Registered FALaholic #: 20404 Join Date: Jul 2006 Location: Superior, Wisconsin Posts: 239	PM sent

February 22, 2018, 12:35	#8
vandal968 Registered FALaholic #: 23530 Join Date: Dec 2006 Location: AZ Posts: 101	Can someone with one of the broken charging handles from Derek please post a good picture. There was an early style which was before my time and a later style that I produced for him. I'd like to know which version failed. cheers, c

February 24, 2018, 09:56	#12
vorgain Registered FALaholic #: 76615 Join Date: Sep 2015 Location: NH Posts: 16	Here's the one I have. https://i.imgur.com/2vGSAsp.jpg

February 26, 2018, 02:53	#15
retired 1 Registered FALaholic #: 75223 Join Date: Dec 2014 Location: Davison, MI Posts: 36	It would be nice to have a spare in case the original breaks.

February 28, 2018, 22:48	#16
veprk5.45 Registered FALaholic #: 41513 Join Date: Jan 2009 Location: arizona Posts: 6	I'm also looking for a replacement charging handle. Barely 24 hours of owning it , havent even fired it and broke it. Stuck dummy round, and as a 15 year ak guy I smacked the charged handle..and snap