Inch carbine kit with 6 US parts.

lhofeld · September 30, 2008, 10:24

I have the following for sale. Inch pattern carbine kit with 6 US parts. The kit is a mixture of British and Aussie parts with the follwoing US components. US hammer, trigger, sear, pistol grip, butt stock and muzzle device. The muzzle break is silver soldered on and the barrel measures approx 16.25". Barrel is British with chromed chamber. Lower is Aussie. Does not include locking shoulder or breeching washer. If you have any questions please ask. $325 shipped. Payment via USPS MO (anyother form of payment recieved will delay shipping. SPF to houtexgunner

I need to clarify the barrel length. Overall length with the muzzlr break is 18.75". The barrel itself if I measured right is approx 16.25". If someone wanted to they could remove the muzzle break thread the barrel and put a flash hider on it which was my intention until I found it was soldered on.

[IMG]

[/IMG]

durden10 · September 30, 2008, 18:40

I know this is a stupid question, but I'm just getting into FALs. First off, what brand is the receiver (imbel, DSA, etc.)? And secondly, what is the gun missing? What would I have to do to it to get it up and running, other than putting it together?

Goliad · September 30, 2008, 18:46

No such thing as a stupid question.......... Unless I misread the ad, a receiver (upper) is not included. That would be what else you needed. A good deal on a kit though, especially with all the US parts.

Dunk RD · September 30, 2008, 20:40

If I am not misstaken, those look like a set of Indian hand guards.
Hard to find.
Dunk RD

lhofeld · September 30, 2008, 22:56

As stated above there are no stupid questions. I have been over the last couple of weeks been cleaning out all of my inch stuff. What is present here is enough parts to assemble a carbine FAL minus the receiver, locking shoulder and breaching washer. I need to clarify that the barrel measures 16.25" with out taking in the length of the muzzle break.

durden10 · September 30, 2008, 23:08

How long does the barrel need to be? Where can I find a receiver and what type would you recommend?

houtexgunner · October 02, 2008, 15:55

I will take it.........
Please send me contact info

September 30, 2008, 10:24	#1
lhofeld Registered FALaholic #: 12305 Join Date: Nov 2003 Location: The Great State of Oklahoma Posts: 771	Inch carbine kit with 6 US parts. I have the following for sale. Inch pattern carbine kit with 6 US parts. The kit is a mixture of British and Aussie parts with the follwoing US components. US hammer, trigger, sear, pistol grip, butt stock and muzzle device. The muzzle break is silver soldered on and the barrel measures approx 16.25". Barrel is British with chromed chamber. Lower is Aussie. Does not include locking shoulder or breeching washer. If you have any questions please ask. $325 shipped. Payment via USPS MO (anyother form of payment recieved will delay shipping. SPF to houtexgunner I need to clarify the barrel length. Overall length with the muzzlr break is 18.75". The barrel itself if I measured right is approx 16.25". If someone wanted to they could remove the muzzle break thread the barrel and put a flash hider on it which was my intention until I found it was soldered on. [IMG][/IMG] __________________ "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes...Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man." --Cesare Beccaria Last edited by lhofeld; October 03, 2008 at 00:41.

September 30, 2008, 20:40	#4
Dunk RD Veteran Member Sept. 13, 1943 — May 9, 2010 FALaholic #: 17965 Join Date: Aug 2005 Location: Bedford, IN Posts: 1,484	Hand guards If I am not misstaken, those look like a set of Indian hand guards. Hard to find. Dunk RD __________________ I believe 10% of the people are Human Beings and the other 90% are clones. ( Rob Jennings ) Pray the Lord the gift he give us, to see ourselves as others see us. Oh for many a blunder free us and many a foolish notion ( Robert Burns)

September 30, 2008, 22:56	#5
lhofeld Registered FALaholic #: 12305 Join Date: Nov 2003 Location: The Great State of Oklahoma Posts: 771	As stated above there are no stupid questions. I have been over the last couple of weeks been cleaning out all of my inch stuff. What is present here is enough parts to assemble a carbine FAL minus the receiver, locking shoulder and breaching washer. I need to clarify that the barrel measures 16.25" with out taking in the length of the muzzle break. __________________ "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes...Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man." --Cesare Beccaria

October 02, 2008, 15:55	#7
houtexgunner Registered FALaholic #: 10134 Join Date: Apr 2003 Location: Houston, Texas Posts: 40	carbine kit l1a1 I will take it......... Please send me contact info

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

September 30, 2008, 18:40	#2
durden10 Registered FALaholic #: 38283 Join Date: Sep 2008 Location: Texas Posts: 3	I know this is a stupid question, but I'm just getting into FALs. First off, what brand is the receiver (imbel, DSA, etc.)? And secondly, what is the gun missing? What would I have to do to it to get it up and running, other than putting it together?

September 30, 2008, 18:46	#3
Goliad Registered FALaholic #: 28473 Join Date: Apr 2007 Location: Wetstern WA Posts: 178	No such thing as a stupid question.......... Unless I misread the ad, a receiver (upper) is not included. That would be what else you needed. A good deal on a kit though, especially with all the US parts.

September 30, 2008, 23:08	#6
durden10 Registered FALaholic #: 38283 Join Date: Sep 2008 Location: Texas Posts: 3	How long does the barrel need to be? Where can I find a receiver and what type would you recommend?