DR-200 Pistol Grips In Stock - 3 styles - Page 4

StormWerkz · July 08, 2010, 07:58

Lots of DR200's out there and tons of them still needing grips for conversions.
Any word on the last batch of grips?

s0b3 · July 08, 2010, 16:31

Quote:

Originally posted by StormWerkz
Lots of DR200's out there and tons of them still needing grips for conversions.
Any word on the last batch of grips?

got 15 or so that are almost done. should be in my hands within a week or two. thanks for the referrals.

snew · July 30, 2010, 17:23

And I'll keep checking in here till I get one.

s0b3 · July 30, 2010, 20:55

Quote:

Originally posted by snew
And I'll keep checking in here till I get one.

they are enroute. was supposed to be delivered today but the post office returned it to the molder after it hit my hub, no idea why. so if usps holds up their end of the bargain, i'll be ready to start taking money next week.

StormWerkz · July 30, 2010, 21:02

Are they all spoken for?

s0b3 · July 30, 2010, 22:39

Quote:

Originally posted by StormWerkz
Are they all spoken for?

got a few extras this time.

s0b3 · August 05, 2010, 19:13

back in stock. get them while they're hot. as with any custom jobs, this one ran long over the estimated production time so if you miss this batch, it may be 6 months before i get another done if there is enough interest.

Hammer1 · September 01, 2010, 11:47

I'll take one.

**grenadier** · September 19, 2010, 22:49

I'll take two. PM to follow.

s0b3 · September 22, 2010, 16:39

Quote:

Originally posted by grenadier
I'll take two. PM to follow.

send me an email. i never got a PM from you and i sent you a pm as well.

s0b3 · October 23, 2010, 18:11

out of stock at the moment. getting some more made. email me if you want to be put on the wait list.

StormWerkz · November 11, 2010, 22:30

Are any grips available ?

s0b3 · November 12, 2010, 00:13

Quote:

Originally posted by StormWerkz
Are any grips available ?

they are at the molders. hopefully within a couple of weeks i'll have them in my hands. i'll update once i get them.

s0b3 · December 16, 2010, 00:56

molder got a few done and on the way to me. about half are spoken for. if you want one in this batch email me and i'll get one set aside for you.

s0b3 · December 29, 2010, 22:18

4 left unspoken for out of this batch

will36 · December 30, 2010, 16:54

Ill take one. I have your address already. The money order will go out tomorrow if the post office is open. If not no later than monday.

**Slo cat** · January 04, 2011, 11:05

I'll take one.

Let me know how to pay.

Best Regards,
Slo cat

StormWerkz · February 15, 2011, 23:16

Do you still have these in stock?

s0b3 · February 16, 2011, 00:38

Quote:

Originally posted by StormWerkz
Do you still have these in stock?

yep still got a few left. working on the hk style and skinny ones just to have something different. for the purists, i'll still have some of the original style made.

s0b3 · April 06, 2011, 00:49

just got a few more original styles in. should have the new designs in a few weeks.

**SPEEDGUNNER** · April 06, 2011, 11:47

any installed pictures?

s0b3 · April 06, 2011, 13:37

Quote:

Originally posted by SPEEDGUNNER
any installed pictures?

Page 3 of this thread show one on a Stormwerkz rifle with their receiver block. They look like they were designed together how well they mesh.

lightguy · August 03, 2011, 17:16

Bumpster.
Any of these available ?

s0b3 · August 03, 2011, 18:40

Quote:

Originally posted by lightguy
Bumpster.
Any of these available ?

currently out (sold my last 2 this week). should have some within a few weeks. email me and i'll let you know when i get them in. should have 2 new designs coming as well.

StormWerkz · August 29, 2011, 15:29

Whats the status on the grips?

s0b3 · August 29, 2011, 18:07

they should be en route. i should have the regular ones in my hand by the end of the week. finalizing the details on the skinny and hk style so those will start being produced shortly.

s0b3 · September 02, 2011, 11:58

back in stock. email me if you need one.

erikd65 · October 02, 2011, 11:44

I just sent you an email for one.

erikd65 · October 07, 2011, 13:48

Quote:

Originally posted by erikd65
I just sent you an email for one.

I just received my grip, and I am VERY satisfied with it. Very nice grip and fits perfectly

s0b3 · October 24, 2011, 12:37

bump with new styles added.

s0b3 · December 04, 2011, 18:13

bump

Ellis · December 08, 2011, 10:01

I'm ready to buy an original grip from you, if you have any left. PM me with contact info and the total price with shipping.

opps · January 01, 2012, 14:38

I need one for a MAX1 (K1A1). Also if anyone has a spare trigger pin and upper receiver for a MAX1/K1A1 - mine is messed up from a bubba job.
Thanks

s0b3 · January 03, 2012, 22:10

Quote:

Originally Posted by opps

I need one for a MAX1 (K1A1). Also if anyone has a spare trigger pin and upper receiver for a MAX1/K1A1 - mine is messed up from a bubba job.
Thanks

i think daewoorifleparts may have a k1a1 grip. i believe that these won't work as the receivers for the dr-200/dr-300 had a rib for the thumbhole stock that wasn't present on the preban ones.

DRP has had uppers before in the past as well.

tiblow · January 28, 2012, 14:18

Do you have any more of these Woo grips?? Which one's do you have left? I just discovered the thread

s0b3 · January 28, 2012, 21:21

Quote:

Originally Posted by tiblow

Do you have any more of these Woo grips?? Which one's do you have left? I just discovered the thread

yep still have them. should have more original style in a few days but have a few hk and skinny styles in stock right now.

s0b3 · March 22, 2012, 20:35

bump. pretty stocked on original and hk style. not many skinny left.

Ellis · March 22, 2012, 21:15

Let me say that the quality on the original style grip I bought was top notch, and its visually indistinguishable from the original.

vandal968 · April 12, 2012, 10:53

Quote:

Originally Posted by Ellis

Let me say that the quality on the original style grip I bought was top notch, and its visually indistinguishable from the original.

I wouldn't say indistinguishable. The originals have a trap door that the reproductions don't have, also they have a hole through the small tab, rather than just a depression.

However, that said, these reproductions are excellent quality and capture the look perfectly. Color is perfect too.

cheers,
v

petros600 · April 12, 2012, 23:10

any available?

s0b3 · April 13, 2012, 00:29

Quote:

Originally Posted by petros600

any available?

yep still have some original and hk style available. send me an email if you're interested.

DYNOMIKE · April 19, 2012, 22:44

I gotta get a grip too!!
E-mail inbound....

s0b3 · June 27, 2012, 12:43

got all 3 back in stock now.

Blain · July 13, 2012, 07:21

Wish one would make a pistol group for the K2 so we can have spares. The original plastic is prone to cracking.

s0b3 · July 13, 2012, 16:38

Quote:

Originally Posted by Blain

Wish one would make a pistol group for the K2 so we can have spares. The original plastic is prone to cracking.

if there's enough demand, i may be able to get one molded but the molds cost a lot up front and if only a few people want them, the price would be really high to absorb the cost of the mold.

65metelhed · July 21, 2012, 13:18

Just received my grip -OUTSTANDING- now does anyone know of a plug that will fit the bottom??? My DPMS AR plug is too small

Dasho101 · July 22, 2012, 14:12

got my grip in the mail yesterday, can wait to get my last three parts to un thumb hole my woo. i got the slim profile and love it.

Blain · July 27, 2012, 23:04

Quote:

Originally Posted by s0b3

if there's enough demand, i may be able to get one molded but the molds cost a lot up front and if only a few people want them, the price would be really high to absorb the cost of the mold.

Talk to the guy at daewoorifleparts.com I'm sure he could fill enough demand. Would also be nice to have a mold of the original folding K2 stock. I'm sure the modern plastics are much stronger.

s0b3 · August 31, 2012, 16:47

bump

s0b3 · November 01, 2012, 17:49

bump. have hk style and skinny style. should have some originals by late next week.

September 01, 2010, 11:47	#158
Hammer1 Registered FALaholic #: 22980 Join Date: Dec 2006 Location: So. Illinois Posts: 122	Daewoo grip I'll take one. __________________ "Who's the bigger fool? The fool or the fool who follows?" Obi Wan Kenobi

January 04, 2011, 11:05	#167
Slo cat Veteran Member Gold Contributor FALaholic #: 11908 Join Date: Sep 2003 Location: Corner of 'Walk' and 'Don't Walk' Posts: 2,368	I'll take one. Let me know how to pay. Best Regards, Slo cat __________________ Always do the right thing. This will gratify some people and astonish the rest. Mark Twain Sicher - Einzelfeuer - Dauerfeuer ORWAC 68-2, NRA DR #24, CMP DP #922, P-100

April 06, 2011, 11:47	#171
SPEEDGUNNER Firearms Connoisseur Gold Contributor FALaholic #: 43933 Join Date: Apr 2009 Location: Scenic Chester County PA Posts: 1,351	any installed pictures? __________________ "There's a race of men that don't fit in, A race that can't stay still; So they break the hearts of kith and kin, And they roam the world at will." - Robert Service

January 01, 2012, 14:38	#183
opps Registered FALaholic #: 8609 Join Date: Dec 2002 Location: South of the snow Posts: 13	Daewoo grips I need one for a MAX1 (K1A1). Also if anyone has a spare trigger pin and upper receiver for a MAX1/K1A1 - mine is messed up from a bubba job. Thanks Last edited by opps; January 01, 2012 at 17:51.

April 19, 2012, 22:44	#192
DYNOMIKE Registered Bronze Contributor FALaholic #: 11982 Join Date: Oct 2003 Location: FLORIDA Posts: 13,984	I gotta get a grip too!! E-mail inbound.... __________________ "If your Gonna DIE, DIE Standing UP"!! The WOLVERINES.......

July 08, 2010, 07:58	#151
StormWerkz Registered FALaholic #: 20404 Join Date: Jul 2006 Posts: 169	Lots of DR200's out there and tons of them still needing grips for conversions. Any word on the last batch of grips?

July 30, 2010, 17:23	#153
snew Registered FALaholic #: 55061 Join Date: Jul 2010 Location: Hillsboro, OR Posts: 1	And I'll keep checking in here till I get one.

July 30, 2010, 21:02	#155
StormWerkz Registered FALaholic #: 20404 Join Date: Jul 2006 Posts: 169	Are they all spoken for?

August 05, 2010, 19:13	#157
s0b3 Registered FALaholic #: 22418 Join Date: Nov 2006 Posts: 573	back in stock. get them while they're hot. as with any custom jobs, this one ran long over the estimated production time so if you miss this batch, it may be 6 months before i get another done if there is enough interest.

September 19, 2010, 22:49	#159
grenadier Member Gold Contributor FALaholic #: 13558 Join Date: Feb 2004 Location: Houston, Texas Posts: 141	I'll take two. PM to follow.

October 23, 2010, 18:11	#161
s0b3 Registered FALaholic #: 22418 Join Date: Nov 2006 Posts: 573	out of stock at the moment. getting some more made. email me if you want to be put on the wait list.

November 11, 2010, 22:30	#162
StormWerkz Registered FALaholic #: 20404 Join Date: Jul 2006 Posts: 169	Are any grips available ?

December 16, 2010, 00:56	#164
s0b3 Registered FALaholic #: 22418 Join Date: Nov 2006 Posts: 573	molder got a few done and on the way to me. about half are spoken for. if you want one in this batch email me and i'll get one set aside for you.

December 29, 2010, 22:18	#165
s0b3 Registered FALaholic #: 22418 Join Date: Nov 2006 Posts: 573	4 left unspoken for out of this batch

December 30, 2010, 16:54	#166
will36 Registered FALaholic #: 62270 Join Date: Dec 2010 Location: Arkansas Posts: 6	Ill take one. I have your address already. The money order will go out tomorrow if the post office is open. If not no later than monday.

February 15, 2011, 23:16	#168
StormWerkz Registered FALaholic #: 20404 Join Date: Jul 2006 Posts: 169	Do you still have these in stock?

April 06, 2011, 00:49	#170
s0b3 Registered FALaholic #: 22418 Join Date: Nov 2006 Posts: 573	just got a few more original styles in. should have the new designs in a few weeks.

August 03, 2011, 17:16	#173
lightguy Registered FALaholic #: 51348 Join Date: Jan 2010 Location: Texas Posts: 124	Bumpster. Any of these available ?

August 29, 2011, 15:29	#175
StormWerkz Registered FALaholic #: 20404 Join Date: Jul 2006 Posts: 169	Whats the status on the grips?

August 29, 2011, 18:07	#176
s0b3 Registered FALaholic #: 22418 Join Date: Nov 2006 Posts: 573	they should be en route. i should have the regular ones in my hand by the end of the week. finalizing the details on the skinny and hk style so those will start being produced shortly.

September 02, 2011, 11:58	#177
s0b3 Registered FALaholic #: 22418 Join Date: Nov 2006 Posts: 573	back in stock. email me if you need one.

October 02, 2011, 11:44	#178
erikd65 Registered FALaholic #: 64306 Join Date: Sep 2011 Location: WA Posts: 4	I just sent you an email for one.

October 24, 2011, 12:37	#180
s0b3 Registered FALaholic #: 22418 Join Date: Nov 2006 Posts: 573	bump with new styles added.

December 04, 2011, 18:13	#181
s0b3 Registered FALaholic #: 22418 Join Date: Nov 2006 Posts: 573	bump

December 08, 2011, 10:01	#182
Ellis Registered FALaholic #: 63649 Join Date: Jun 2011 Location: Florida Posts: 60	I'm ready to buy an original grip from you, if you have any left. PM me with contact info and the total price with shipping.

January 28, 2012, 14:18	#185
tiblow Registered FALaholic #: 12893 Join Date: Dec 2003 Location: middle earth Posts: 1,097	Do you have any more of these Woo grips?? Which one's do you have left? I just discovered the thread

March 22, 2012, 20:35	#187
s0b3 Registered FALaholic #: 22418 Join Date: Nov 2006 Posts: 573	bump. pretty stocked on original and hk style. not many skinny left.

March 22, 2012, 21:15	#188
Ellis Registered FALaholic #: 63649 Join Date: Jun 2011 Location: Florida Posts: 60	Let me say that the quality on the original style grip I bought was top notch, and its visually indistinguishable from the original.

April 12, 2012, 23:10	#190
petros600 Registered FALaholic #: 55701 Join Date: Aug 2010 Location: New Jersey Posts: 24	any available?

June 27, 2012, 12:43	#193
s0b3 Registered FALaholic #: 22418 Join Date: Nov 2006 Posts: 573	got all 3 back in stock now.

July 13, 2012, 07:21	#194
Blain Registered FALaholic #: 11131 Join Date: Jul 2003 Location: The Free State Posts: 236	Wish one would make a pistol group for the K2 so we can have spares. The original plastic is prone to cracking.

July 21, 2012, 13:18	#196
65metelhed Registered FALaholic #: 62249 Join Date: Dec 2010 Location: West Virginia Posts: 5	Just received my grip -OUTSTANDING- now does anyone know of a plug that will fit the bottom??? My DPMS AR plug is too small

July 22, 2012, 14:12	#197
Dasho101 Registered FALaholic #: 50568 Join Date: Nov 2009 Location: Richmond, va Posts: 129	got my grip in the mail yesterday, can wait to get my last three parts to un thumb hole my woo. i got the slim profile and love it.

August 31, 2012, 16:47	#199
s0b3 Registered FALaholic #: 22418 Join Date: Nov 2006 Posts: 573	bump

November 01, 2012, 17:49	#200
s0b3 Registered FALaholic #: 22418 Join Date: Nov 2006 Posts: 573	bump. have hk style and skinny style. should have some originals by late next week.