|
June 06, 2012, 23:23
|
#1 |
|
Veteran Member
Bronze Contributor
FALaholic #: 4237 Join Date: Sep 2001
Location: Dallas
Posts: 1,314
|
Trigger return spring Q
So what problems might I run into by using a lighter weight trigger return spring?
Not thinking of going too light, just one that is the same length but slightly smaller diameter wire.
__________________
Looking for ARMS #3 standard mount |
|
|
|
June 08, 2012, 18:13
|
#2 |
|
Veteran Member
Bronze Contributor
FALaholic #: 4237 Join Date: Sep 2001
Location: Dallas
Posts: 1,314
|
Anyone??
__________________
Looking for ARMS #3 standard mount |
|
|
|
|
June 08, 2012, 22:41
|
#3 |
|
Arrogant Bastard
Gold Contributor
FALaholic #: 96 Join Date: Jul 2000
Location: Surprise, AZ
Posts: 15,779
|
The trigger may not return forward.
Simple as that. It has to override the sear. SOmetimes a slight bevel on the bottom rear of the sear will help it climb the shelf. By "slight" I mean laying it on a medium india stone and taking 2-3 light swipes. Ball point pen spring - don't bother. Wolf Heavy duty metric #5-6 works. Cut to same length as trigger return plunger. crimp front end, expand rear.
__________________
T. Mark Graham Master Gunsmith Arizona Response Systems, LLC |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
