Slant Receiver Poly Tech

G3isMe · April 16, 2012, 17:57

I have a Poly Tech with the slant cut receiver. I am guess this came in as a Mak 90 (or whatever the name was for the butthole stocked Poly Techs) It has the requisite number of US parts to allow for a regular stock but they look crappy on it with the slant cut. Anyone have any suggestions for making this look nicer?

**tdb59** · April 16, 2012, 18:08

http://ironwooddesigns.com/IWDNEWAKMA_2.html

**hkshooter** · April 16, 2012, 19:50

Go with the aforementioned IW stock (I still don't like the looks of'em)
or you can go over to TheAKforums and look up Turbothis. He can weld up a slant like nobodys buisness.
Here's one I had done.

G3isMe · April 16, 2012, 20:04

Thanks guys. That weld job looks like there never was a slant. Well done!

gunsmoke · April 17, 2012, 00:50

Do you know if he does milled?

I've got a few Legends in the safe and two that walk around, nobody's touching any of them while I live but I do have a few MAK 90s I've even got the synthetic stocks and GALIL PGs I want to put on them!

**gunplumber** · April 17, 2012, 08:48

holy smokes that's a nice weld job.

TnHawk-45 · April 17, 2012, 10:30

Quote:

Originally Posted by gunsmoke

Do you know if he does milled?

I've got a few Legends in the safe and two that walk around, nobody's touching any of them while I live but I do have a few MAK 90s I've even got the synthetic stocks and GALIL PGs I want to put on them!

Yes he does milled. Man does a great job putting cut milled gun back together again. His latest project is making stamped receivers for Chinese guns and pivot pins for folder stocks nobody has.

G3isMe · April 17, 2012, 15:12

The next question is, what is the "estimated" cost for him to weld up a slant on a stamped receiver?

**hkshooter** · April 17, 2012, 18:54

As mentioned, yes he does milled. They were his first attemp in fact.
See the thread below. You can contact him via the forums if you are a member.
http://www.theakforum.net/phpBB3/vie...glory#p1174149

April 16, 2012, 17:57	#1
G3isMe Registered Bronze Contributor FALaholic #: 6530 Join Date: May 2002 Posts: 1,752	Slant Receiver Poly Tech I have a Poly Tech with the slant cut receiver. I am guess this came in as a Mak 90 (or whatever the name was for the butthole stocked Poly Techs) It has the requisite number of US parts to allow for a regular stock but they look crappy on it with the slant cut. Anyone have any suggestions for making this look nicer? __________________ "I believe that time wounds all heels" ----John Lennon

April 16, 2012, 18:08	#2
tdb59 Curio & Relic Bronze Contributor FALaholic #: 63177 Join Date: Mar 2011 Location: I am here Posts: 2,263	http://ironwooddesigns.com/IWDNEWAKMA_2.html __________________ "I've SEEN the future. Do you know what it is? It's a 47-year-old virgin sitting around in his beige pajamas, drinking a banana-broccoli shake, singing "I'm an Oscar Meyer Wiener".

April 16, 2012, 20:04	#4
G3isMe Registered Bronze Contributor FALaholic #: 6530 Join Date: May 2002 Posts: 1,752	Thanks guys. That weld job looks like there never was a slant. Well done! __________________ "I believe that time wounds all heels" ----John Lennon

April 17, 2012, 00:50	#5
gunsmoke Registered FALaholic #: 14772 Join Date: Jun 2004 Location: LOUISIANA Posts: 1,196	Do you know if he does milled? I've got a few Legends in the safe and two that walk around, nobody's touching any of them while I live but I do have a few MAK 90s I've even got the synthetic stocks and GALIL PGs I want to put on them! __________________ "A fear of weapons is a sign of retarded sexual and emotional maturity." Sigmund Freud

April 17, 2012, 08:48	#6
gunplumber Arrogant Bastard Gold Contributor FALaholic #: 96 Join Date: Jul 2000 Location: Surprise, AZ Posts: 15,771	holy smokes that's a nice weld job. __________________ T. Mark Graham Master Gunsmith Arizona Response Systems, LLC

April 16, 2012, 19:50	#3
hkshooter Veteran Member Silver Contributor FALaholic #: 5391 Join Date: Jan 2002 Posts: 1,781	Go with the aforementioned IW stock (I still don't like the looks of'em) or you can go over to TheAKforums and look up Turbothis. He can weld up a slant like nobodys buisness. Here's one I had done.

April 17, 2012, 15:12	#8
G3isMe Registered Bronze Contributor FALaholic #: 6530 Join Date: May 2002 Posts: 1,752	The next question is, what is the "estimated" cost for him to weld up a slant on a stamped receiver? __________________ "I believe that time wounds all heels" ----John Lennon

April 17, 2012, 18:54	#9
hkshooter Veteran Member Silver Contributor FALaholic #: 5391 Join Date: Jan 2002 Posts: 1,781	As mentioned, yes he does milled. They were his first attemp in fact. See the thread below. You can contact him via the forums if you are a member. http://www.theakforum.net/phpBB3/vie...glory#p1174149

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode