Middle TN Group

daveW · March 11, 2011, 23:02

Hey, is there any interest in some sort of Middle TN gathering? It could be a range day, meet-and-greet, whatever...I think it would be cool to talk shooting face to face with actual humans like I did before the internet

.

I'm in Middle TN and am willing to travel within an hour or so of Nashville to make this happen.

jt59 · March 12, 2011, 18:59

That sounds like a good idea. I am thirty miles west of Nashville. I will have some free time when school is out this summer. I need an excuse to shoot the big guns. Mostly been shooting 22s due to cost of ammo.

daveW · March 13, 2011, 15:46

23 views and only one reply...come on TN, where are ya?

Thanks for replying JT59, I too am eagerly awaiting Summer. Is the Cheatham Co. range within reasonable driving distance for you?

Hootsmon · March 14, 2011, 09:21

I used to be in Middle TN....

but then the Army said I had to live somewhere else...

kotengu · March 15, 2011, 13:48

I'm in Baxter (about an hour east of Nashville), and my normal range is in Fairfield Glade (almost two hours east of Nashville). I shoot Highpower and Long Range matches at Oak Ridge, Chattanooga, and AEDC, but the FAL doesn't go with me to those any more

Any Mid-TN folk are plenty close to shoot the GA FAL match every May in Dawsonville, GA though. I go almost every year and it's well worth the drive.

http://www.falfiles.com/forums/showt...hreadid=302607

ThePreacher · March 15, 2011, 21:29

Whats the name of the range in Fairfield Glade ?I live about 30 miles east of you. I dont know if you remember me but you helped me build my first FAL about 6 or so years ago.

kotengu · March 15, 2011, 21:39

Absolutely! How's that old girl doing? I can't believe it's been 6 years -

The range is called the Fairfield Glade Sportsmans Club (www.ffgsc.com I think). It really caters to fancy shotgunners, but they've got a 250yd rifle range way back in the woods if you know where to look. Don't tell anybody though - I've enjoyed having the place to myself every time I've been ;-)

daveW · March 17, 2011, 21:40

Quote:

Originally posted by kotengu
I'm in Baxter (about an hour east of Nashville), and my normal range is in Fairfield Glade (almost two hours east of Nashville). I shoot Highpower and Long Range matches at Oak Ridge, Chattanooga, and AEDC, but the FAL doesn't go with me to those any more

Any Mid-TN folk are plenty close to shoot the GA FAL match every May in Dawsonville, GA though. I go almost every year and it's well worth the drive.

http://www.falfiles.com/forums/showt...hreadid=302607

I'll look into the GA shoot...what replaced the FAL in your Highpower/Long Range shooting?

kotengu · March 18, 2011, 00:49

Unfortunately (or fortunately, depending on how you look at it) I gave in to peer pressure and got a nice Hollinger AR for Highpower, and a Remington 700 for Long Range. Shooting those feels like cheating compared to the FAL, but I still use the old girl for 3-gun and the like. The others may be more accurate, but they just don't have the character the FAL does!

daveW · April 01, 2011, 21:54

No reason to bump this since its the only thread in the state of TN...but I'd still like to see something develop. Summer's just around the corner!

daveW · May 07, 2011, 20:08

Bump...just to keep it alive.

rwadamus · July 14, 2011, 08:10

Hey Dave (or anybody else):

Anyone know of a reputable builder in the Middle TN area? Or is anyone willing to try to get a build party together maybe this Fall?

I'm about 20 miles north of Nashville, with an Imbel kit, a receiver from Pat's group buy, a few spares but no experience in assembly.

Thanks,

BB

kotengu · July 14, 2011, 08:46

I'm no gunsmith/FFL so I can't do it for you, but I'd be happy to help you put it together if you make the trek to Baxter, TN. I've got all the tools for barreling and headspacing. I've built about ten so far -

daveW · July 14, 2011, 14:16

I don't know a FAL builder in the area but I have a good friend who makes a living as a gunsmith. Further, I'd be interested in throwing together a rifle this fall too if a build party happens. I have meant to build another for a while anyway-this might force me to make it a priority.

If your serious about doing this, let me know. I'm currently under about 3 major projects and need to start switching gears/diverting cash to get the FAL build underway.

Edit: When I say "build another", I mean I want another FAL-not I have significant experience building them. I have every confidence that I can do it, though.

rwadamus · August 11, 2011, 15:19

Kotengu and DaveW, thanks for the replies.

I believe I have a builder lined up for my Imbel/Imbel within a couple of weeks, but I am still very interested in a get-together with some FAL folks in TN sometime in the fall.

Could we get together at a range? And where is the best suitable range close to Nashville?

Thanks guys,

BB

**Shootability** · August 11, 2011, 16:23

Sounds good to me.

rob1 · September 01, 2011, 12:59

Haven't checked in here in awhile...I'm up for getting together sometime. I"m just south of Nashville if anyone needs any help putting a rifle together. I'm also have done some parkerizing, just need to get everything out of storage and set back up to do it.

kotengu · September 01, 2011, 15:00

There's a 3-gun match in Gallatin in October. I'd love not to be the only FALer there! Details are in the competition forum.

rob1 · September 01, 2011, 15:07

Hmm, sounds interesting...if the wife doesn't have anything else planned for me that day, I 'll try to make it! Should know soon!

rob1 · September 05, 2011, 07:06

Wife's family reunion is that day, don't have much choice on that one.. :-(

kotengu · September 05, 2011, 09:32

Ahhh - it's your WIFE's family, not yours. Your FAL has a reunion calling too!

Just kidding - have fun and take care of family first. There will be another match.

**TNAndy** · February 03, 2012, 10:12

I live in East Tennessee but I have friends I could crash with just outside of Nashville and others just outside of Memphis. I realize I'm resurrecting a thread, but if there are going to be

activities in Tennessee in the future, I'd like the chance to participate.

And if anyone knows of a 100-200 yard/meter range that's extra cheap or free as well as local, please let me know. I still don't know how my FALs shoot at that distance and I'd much rather spend money on ammo than gas or range fees.

Redec · November 14, 2012, 16:56

Hey guys. Kinda new here. I bought an argy kit and my Coonan receiver should be here by the end of Nov.

I plan on buying the tools(receiver wrench and barrel vise) when money comes available but I know this kit will be burning at me to build once the receiver comes in.

Is there anyone in the middle TN area that would be interested in helping me build this thing that has the tools or maybe can lend them to me?

I built my AR, except barreling the upper receiver, so I have some experience. Plus my other expensive hobby is a complete restore of a 67 Camaro. So I have patience too.

kotengu · November 14, 2012, 20:40

If you want to drive an hour and a half my offer above still stands. I've got all the tools and gauges already -

Redec · November 14, 2012, 21:39

I might take you up on that kotengu

rob1 · November 16, 2012, 17:14

Don't have a barrel vise, but have a receiver wrench and the gauges.

Redec · December 06, 2012, 18:58

I should be able to pick up my receiver tomorrow. I am still thinking about getting the tools and doing it myself. It's my nature.

kotengu · December 06, 2012, 21:04

Whatever floats your boat, man - post pics when it's done!

Dougw4 · December 09, 2012, 20:15

Did Ya'll ever have a meet up?
I live in Nashville and have access to a 200yd private range and a really nice clubhouse if there is any interest? (15-20 min from downtown Nash.)

fasteddie · December 11, 2012, 11:00

I'm in Murfreesboro. I usually shoot at Owl Hollow or Woodbury.
In seven years I've never seen any other FAL's at the range but my own.

Redec · December 12, 2012, 00:10

I'm in Goodlettsville. I would love to have access to a 200 yrd range to sight in a couple of my rifles. I have an AR and a 700 I need to sight in and will need to sight my FAL in when I get it together.

I have everything but a barrel vise now to start putting my Argy together. Hopefully I will have the cash to get the vise, a locking shoulder, flash suppressor, a couple of mags and some ammo after Christmas.

rob1 · December 14, 2012, 11:29

Redec, i think the argy flash hider is the same as the Belgian/imbel combo device, I have several if you want one. They aren't new, but should be able to be cleaned up, would need to be refinished. I could throw one in and parkerize it the next time I'm doing some, which should be soon. Free of charge if you want it.

Redec · December 14, 2012, 11:54

Wow rob1 that would be awesome.

rob1 · December 14, 2012, 15:39

No problem, I have a box full of spares. I've got a buddy bugging me to parkerize some m1a mags for him, so whenever I do those I'll pick out the best one and throw it in with them.

Redec · December 14, 2012, 15:56

Sounds great. Thanks rob1. I hope to sell my guitar so I can get the rest of the stuff to complete the rifle and hopefully a few mags.

Redec · December 18, 2012, 20:03

Anyone local have decent mags for sell. I wouldn't mind stg metric mags or any known type in good shape. My guitar is going to sell on ebay so I can finally finish my Argy.

kotengu · December 18, 2012, 20:23

Sure - $20ea for used surplus 20rd mags in good condition. Some may be STG - I'll have to look. I also have a couple new in wrap Belgian mags for $30 and an aluminum para mag or two for $30.

If you have any interest let me know and I can send some pics and firm up my inventory details (going off the top of my head). I'll meet you halfway some evening or weekend -

Matt

Redec · December 18, 2012, 21:18

PM sent thanks bro

ALL FAL · December 19, 2012, 00:10

Cool, I really like to see faler's work with each other local, get to know each other, Militia tight.

kotengu · December 28, 2012, 20:55

The date has been set for the 2013 GA FAL Match - March 30th. Details will be posted here as we get closer: http://www.falfiles.com/forums/showt...=1#post3500456

I'd strongly encourage ANY of you to come down and join me there! Dawsonville, GA is not a very far drive, and this is the largest FAL gathering in the South. There is something there for everyone - from someone who has never shot a match there before, to someone who really wants a challenge.

Most people come just to hang out, talk to fellow FALers, and see more variants of the FAL in one place than they ever would anywhere else. It's also a great place to learn how to use your FAL better, as there are several very talented folks that attend. I spend a lot of time watching and learning from those better than I, and have always found everyone to be friendly and eager to help anyone willing to learn.

Redec · January 13, 2013, 18:26

I got her together. I put in an order to APEX for a locking shoulder and hope to put to ammo though this weekend.

ALL FAL · January 13, 2013, 19:20

Clean looking rifle, enjoy.

kotengu · January 13, 2013, 22:33

Looks great!

Mauser_556 · January 16, 2013, 00:45

New guy, new FAL, near Cookeville, TN.

kotengu · January 16, 2013, 06:22

Welcome! I'm in Baxter, just up the road from you. Tell us about your new FAL -

Redec · January 16, 2013, 14:36

Welcome Mauser_556.

Side note, my LS should be here Friday or Saturday. I finally might get to put some ammo done the tube.

Mauser_556 · January 17, 2013, 21:31

Quote:

Originally Posted by kotengu

Welcome! I'm in Baxter, just up the road from you. Tell us about your new FAL -

SA58 21" full rifle version. Loved the look but never could get one until now. Figure I bit into it before KOTUS (King of the United States) gets his tempered ways.

Bi-Pod with chrome nickle parts and a flat top rail system. Other than that, standard Free World FN FAL.

(Curios--Did you happen to run a martial arts school?)

**Shootability** · January 17, 2013, 21:37

Any of you guys shoot up at Manchester - MTSC - we lease the pistol bay side for IDPA/USPSA and the range owner keeps the rifle side - I think they have targets out to 500 - Barrett shoots there from time to time. I do not think I have ever seen another FAL there.

http://www.midtnshooters.com/

kotengu · January 17, 2013, 22:05

Quote:

Originally Posted by Mauser_556

SA58 21" full rifle version. Loved the look but never could get one until now. Figure I bit into it before KOTUS (King of the United States) gets his tempered ways.

Bi-Pod with chrome nickle parts and a flat top rail system. Other than that, standard Free World FN FAL.

(Curios--Did you happen to run a martial arts school?)

I did - have you been here before?

kotengu · January 17, 2013, 22:07

Quote:

Originally Posted by Shootability

Any of you guys shoot up at Manchester - MTSC - we lease the pistol bay side for IDPA/USPSA and the range owner keeps the rifle side - I think they have targets out to 500 - Barrett shoots there from time to time. I do not think I have ever seen another FAL there.

http://www.midtnshooters.com/

I've been there once lately for IDPA, and several years ago for 3-gun with the FAL. I usually shoot IDPA at Gallatin though. Maybe we've run into each other at a match?

March 11, 2011, 23:02	#1
daveW Registered FALaholic #: 22147 Join Date: Nov 2006 Posts: 106	Middle TN Group Hey, is there any interest in some sort of Middle TN gathering? It could be a range day, meet-and-greet, whatever...I think it would be cool to talk shooting face to face with actual humans like I did before the internet . I'm in Middle TN and am willing to travel within an hour or so of Nashville to make this happen.

March 14, 2011, 09:21	#4
Hootsmon Registered FALaholic #: 42584 Join Date: Feb 2009 Location: Kansas City, MO Posts: 496	I used to be in Middle TN.... but then the Army said I had to live somewhere else... __________________ "Liberty will continue to erode, but not so fast we’ll jump out of the boiling pot"

March 15, 2011, 13:48	#5
kotengu Registered FALaholic #: 1594 Join Date: Nov 2000 Location: Baxter, TN, USA Posts: 3,096	I'm in Baxter (about an hour east of Nashville), and my normal range is in Fairfield Glade (almost two hours east of Nashville). I shoot Highpower and Long Range matches at Oak Ridge, Chattanooga, and AEDC, but the FAL doesn't go with me to those any more Any Mid-TN folk are plenty close to shoot the GA FAL match every May in Dawsonville, GA though. I go almost every year and it's well worth the drive. http://www.falfiles.com/forums/showt...hreadid=302607 __________________ "The way is in training." - Miyamoto Musashi

March 15, 2011, 21:39	#7
kotengu Registered FALaholic #: 1594 Join Date: Nov 2000 Location: Baxter, TN, USA Posts: 3,096	Absolutely! How's that old girl doing? I can't believe it's been 6 years - The range is called the Fairfield Glade Sportsmans Club (www.ffgsc.com I think). It really caters to fancy shotgunners, but they've got a 250yd rifle range way back in the woods if you know where to look. Don't tell anybody though - I've enjoyed having the place to myself every time I've been ;-) __________________ "The way is in training." - Miyamoto Musashi

March 18, 2011, 00:49	#9
kotengu Registered FALaholic #: 1594 Join Date: Nov 2000 Location: Baxter, TN, USA Posts: 3,096	Unfortunately (or fortunately, depending on how you look at it) I gave in to peer pressure and got a nice Hollinger AR for Highpower, and a Remington 700 for Long Range. Shooting those feels like cheating compared to the FAL, but I still use the old girl for 3-gun and the like. The others may be more accurate, but they just don't have the character the FAL does! __________________ "The way is in training." - Miyamoto Musashi

March 12, 2011, 18:59	#2
jt59 Registered Contributor FALaholic #: 21735 Join Date: Nov 2006 Posts: 68	That sounds like a good idea. I am thirty miles west of Nashville. I will have some free time when school is out this summer. I need an excuse to shoot the big guns. Mostly been shooting 22s due to cost of ammo.

March 13, 2011, 15:46	#3
daveW Registered FALaholic #: 22147 Join Date: Nov 2006 Posts: 106	23 views and only one reply...come on TN, where are ya? Thanks for replying JT59, I too am eagerly awaiting Summer. Is the Cheatham Co. range within reasonable driving distance for you?

March 15, 2011, 21:29	#6
ThePreacher Registered Contributor FALaholic #: 9311 Join Date: Feb 2003 Location: Middle Tennessee Posts: 359	Whats the name of the range in Fairfield Glade ?I live about 30 miles east of you. I dont know if you remember me but you helped me build my first FAL about 6 or so years ago.

April 01, 2011, 21:54	#10
daveW Registered FALaholic #: 22147 Join Date: Nov 2006 Posts: 106	No reason to bump this since its the only thread in the state of TN...but I'd still like to see something develop. Summer's just around the corner!

May 07, 2011, 20:08	#11
daveW Registered FALaholic #: 22147 Join Date: Nov 2006 Posts: 106	Bump...just to keep it alive.

July 14, 2011, 08:10	#12
rwadamus Registered FALaholic #: 53008 Join Date: Apr 2010 Location: TN Posts: 82	Hey Dave (or anybody else): Anyone know of a reputable builder in the Middle TN area? Or is anyone willing to try to get a build party together maybe this Fall? I'm about 20 miles north of Nashville, with an Imbel kit, a receiver from Pat's group buy, a few spares but no experience in assembly. Thanks, BB

July 14, 2011, 08:46	#13
kotengu Registered FALaholic #: 1594 Join Date: Nov 2000 Location: Baxter, TN, USA Posts: 3,096	I'm no gunsmith/FFL so I can't do it for you, but I'd be happy to help you put it together if you make the trek to Baxter, TN. I've got all the tools for barreling and headspacing. I've built about ten so far - __________________ "The way is in training." - Miyamoto Musashi Last edited by kotengu; July 14, 2011 at 14:47.

July 14, 2011, 14:16	#14
daveW Registered FALaholic #: 22147 Join Date: Nov 2006 Posts: 106	I don't know a FAL builder in the area but I have a good friend who makes a living as a gunsmith. Further, I'd be interested in throwing together a rifle this fall too if a build party happens. I have meant to build another for a while anyway-this might force me to make it a priority. If your serious about doing this, let me know. I'm currently under about 3 major projects and need to start switching gears/diverting cash to get the FAL build underway. Edit: When I say "build another", I mean I want another FAL-not I have significant experience building them. I have every confidence that I can do it, though.

August 11, 2011, 15:19	#15
rwadamus Registered FALaholic #: 53008 Join Date: Apr 2010 Location: TN Posts: 82	Kotengu and DaveW, thanks for the replies. I believe I have a builder lined up for my Imbel/Imbel within a couple of weeks, but I am still very interested in a get-together with some FAL folks in TN sometime in the fall. Could we get together at a range? And where is the best suitable range close to Nashville? Thanks guys, BB

August 11, 2011, 16:23	#16
Shootability Formerly Solvability Bronze Contributor FALaholic #: 6448 Join Date: May 2002 Location: HSV Posts: 2,707	Sounds good to me.

September 01, 2011, 12:59	#17
rob1 Registered FALaholic #: 529 Join Date: Jul 2000 Location: Chapel Hill, TN US Posts: 2,160	Haven't checked in here in awhile...I'm up for getting together sometime. I"m just south of Nashville if anyone needs any help putting a rifle together. I'm also have done some parkerizing, just need to get everything out of storage and set back up to do it. __________________ Alright you primitive screwheads, listen up. See this? THIS is my BOOMSTICK!

September 01, 2011, 15:00	#18
kotengu Registered FALaholic #: 1594 Join Date: Nov 2000 Location: Baxter, TN, USA Posts: 3,096	There's a 3-gun match in Gallatin in October. I'd love not to be the only FALer there! Details are in the competition forum. __________________ "The way is in training." - Miyamoto Musashi

September 01, 2011, 15:07	#19
rob1 Registered FALaholic #: 529 Join Date: Jul 2000 Location: Chapel Hill, TN US Posts: 2,160	Hmm, sounds interesting...if the wife doesn't have anything else planned for me that day, I 'll try to make it! Should know soon! __________________ Alright you primitive screwheads, listen up. See this? THIS is my BOOMSTICK!

September 05, 2011, 07:06	#20
rob1 Registered FALaholic #: 529 Join Date: Jul 2000 Location: Chapel Hill, TN US Posts: 2,160	Wife's family reunion is that day, don't have much choice on that one.. :-( __________________ Alright you primitive screwheads, listen up. See this? THIS is my BOOMSTICK!

September 05, 2011, 09:32	#21
kotengu Registered FALaholic #: 1594 Join Date: Nov 2000 Location: Baxter, TN, USA Posts: 3,096	Ahhh - it's your WIFE's family, not yours. Your FAL has a reunion calling too! Just kidding - have fun and take care of family first. There will be another match. __________________ "The way is in training." - Miyamoto Musashi

February 03, 2012, 10:12	#22
TNAndy Computer Geek Contributor FALaholic #: 64986 Join Date: Jan 2012 Location: Tennessee Posts: 320	I live in East Tennessee but I have friends I could crash with just outside of Nashville and others just outside of Memphis. I realize I'm resurrecting a thread, but if there are going to be activities in Tennessee in the future, I'd like the chance to participate. And if anyone knows of a 100-200 yard/meter range that's extra cheap or free as well as local, please let me know. I still don't know how my FALs shoot at that distance and I'd much rather spend money on ammo than gas or range fees. __________________ ----------- Go Vols!

November 14, 2012, 16:56	#23
Redec Registered FALaholic #: 66707 Join Date: Jul 2012 Location: Goodlettsville, Tennessee Posts: 83	Hey guys. Kinda new here. I bought an argy kit and my Coonan receiver should be here by the end of Nov. I plan on buying the tools(receiver wrench and barrel vise) when money comes available but I know this kit will be burning at me to build once the receiver comes in. Is there anyone in the middle TN area that would be interested in helping me build this thing that has the tools or maybe can lend them to me? I built my AR, except barreling the upper receiver, so I have some experience. Plus my other expensive hobby is a complete restore of a 67 Camaro. So I have patience too.

November 14, 2012, 20:40	#24
kotengu Registered FALaholic #: 1594 Join Date: Nov 2000 Location: Baxter, TN, USA Posts: 3,096	If you want to drive an hour and a half my offer above still stands. I've got all the tools and gauges already - __________________ "The way is in training." - Miyamoto Musashi

November 14, 2012, 21:39	#25
Redec Registered FALaholic #: 66707 Join Date: Jul 2012 Location: Goodlettsville, Tennessee Posts: 83	I might take you up on that kotengu

November 16, 2012, 17:14	#26
rob1 Registered FALaholic #: 529 Join Date: Jul 2000 Location: Chapel Hill, TN US Posts: 2,160	Don't have a barrel vise, but have a receiver wrench and the gauges. __________________ Alright you primitive screwheads, listen up. See this? THIS is my BOOMSTICK!

December 06, 2012, 18:58	#27
Redec Registered FALaholic #: 66707 Join Date: Jul 2012 Location: Goodlettsville, Tennessee Posts: 83	I should be able to pick up my receiver tomorrow. I am still thinking about getting the tools and doing it myself. It's my nature.

December 06, 2012, 21:04	#28
kotengu Registered FALaholic #: 1594 Join Date: Nov 2000 Location: Baxter, TN, USA Posts: 3,096	Whatever floats your boat, man - post pics when it's done! __________________ "The way is in training." - Miyamoto Musashi

December 09, 2012, 20:15	#29
Dougw4 Registered FALaholic #: 17960 Join Date: Aug 2005 Location: Nashville T.N. Posts: 162	Mid TN get together Did Ya'll ever have a meet up? I live in Nashville and have access to a 200yd private range and a really nice clubhouse if there is any interest? (15-20 min from downtown Nash.)

December 11, 2012, 11:00	#30
fasteddie Registered FALaholic #: 7318 Join Date: Aug 2002 Location: Murfreesboro, TN Posts: 12	I'm in Murfreesboro. I usually shoot at Owl Hollow or Woodbury. In seven years I've never seen any other FAL's at the range but my own. __________________ Eddie Last edited by fasteddie; December 11, 2012 at 11:24.

December 12, 2012, 00:10	#31
Redec Registered FALaholic #: 66707 Join Date: Jul 2012 Location: Goodlettsville, Tennessee Posts: 83	I'm in Goodlettsville. I would love to have access to a 200 yrd range to sight in a couple of my rifles. I have an AR and a 700 I need to sight in and will need to sight my FAL in when I get it together. I have everything but a barrel vise now to start putting my Argy together. Hopefully I will have the cash to get the vise, a locking shoulder, flash suppressor, a couple of mags and some ammo after Christmas.

December 14, 2012, 11:29	#32
rob1 Registered FALaholic #: 529 Join Date: Jul 2000 Location: Chapel Hill, TN US Posts: 2,160	Redec, i think the argy flash hider is the same as the Belgian/imbel combo device, I have several if you want one. They aren't new, but should be able to be cleaned up, would need to be refinished. I could throw one in and parkerize it the next time I'm doing some, which should be soon. Free of charge if you want it. __________________ Alright you primitive screwheads, listen up. See this? THIS is my BOOMSTICK!

December 14, 2012, 11:54	#33
Redec Registered FALaholic #: 66707 Join Date: Jul 2012 Location: Goodlettsville, Tennessee Posts: 83	Wow rob1 that would be awesome.

December 14, 2012, 15:39	#34
rob1 Registered FALaholic #: 529 Join Date: Jul 2000 Location: Chapel Hill, TN US Posts: 2,160	No problem, I have a box full of spares. I've got a buddy bugging me to parkerize some m1a mags for him, so whenever I do those I'll pick out the best one and throw it in with them. __________________ Alright you primitive screwheads, listen up. See this? THIS is my BOOMSTICK!

December 14, 2012, 15:56	#35
Redec Registered FALaholic #: 66707 Join Date: Jul 2012 Location: Goodlettsville, Tennessee Posts: 83	Sounds great. Thanks rob1. I hope to sell my guitar so I can get the rest of the stuff to complete the rifle and hopefully a few mags.

December 18, 2012, 20:03	#36
Redec Registered FALaholic #: 66707 Join Date: Jul 2012 Location: Goodlettsville, Tennessee Posts: 83	Anyone local have decent mags for sell. I wouldn't mind stg metric mags or any known type in good shape. My guitar is going to sell on ebay so I can finally finish my Argy.