Extractor spring

jackscho · April 26, 2007, 16:43

Need info on how to replace the extractor spring.

brownknees · April 26, 2007, 17:00

Assuming a two piece extractor.
Theres a little hole in the extractor.
Use a bullet tip (or anything else) that will fit in the hole.
Pull back to compress spring.
Lever gently up/out while at the same time cupping a hand in front of the bolt.
The spring should fly out to the front into the cupped hand.
(Or miss completely & dissapear under a big, heavy piece of immovable furniture.)

ostrobothnian · April 26, 2007, 17:03

http://www.falfiles.com/forums/showt...extractor+tool

gunnut1 · April 26, 2007, 17:36

Aim bolt away from you! Safety glasses a must! This is a STRONG spring. Better off to buy the extactor tool. And have three hands!

April 26, 2007, 16:43	#1
jackscho Registered FALaholic #: 1429 Join Date: Oct 2000 Location: Richfield Springs, NY Posts: 10	Extractor spring Need info on how to replace the extractor spring.

April 26, 2007, 17:03	#3
ostrobothnian Rest in Peace May 23, 2011 FALaholic #: 21545 Join Date: Oct 2006 Location: St. Louis, MO Posts: 1,643	help http://www.falfiles.com/forums/showt...extractor+tool __________________ “Haake päälle!” Visualize whirled peas

April 26, 2007, 17:36	#4
gunnut1 Moderator Gold Contributor FALaholic #: 1877 Join Date: Dec 2000 Location: The great Republic of Texas USA!!!!! Posts: 10,430	Aim bolt away from you! Safety glasses a must! This is a STRONG spring. Better off to buy the extactor tool. And have three hands! __________________ Texas, it's a state of mind!!!! The human race is not the pinnacle of evolution. We are but one evolutionary out come.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

April 26, 2007, 17:00	#2
brownknees Registered FALaholic #: 14917 Join Date: Jul 2004 Location: mid atlantic Posts: 12,015	Assuming a two piece extractor. Theres a little hole in the extractor. Use a bullet tip (or anything else) that will fit in the hole. Pull back to compress spring. Lever gently up/out while at the same time cupping a hand in front of the bolt. The spring should fly out to the front into the cupped hand. (Or miss completely & dissapear under a big, heavy piece of immovable furniture.)