Any Central Ohio FAL 'smiths?

smokinhydes1 · February 13, 2007, 07:48

I picked up an FAL off GB that was misrepresented & needs some work. Barrel clock position is way off, and I suspect a headspace issue...bottoms of cases expand on firing & extractor can't yank them out. Any help?

**Ricketts** · February 13, 2007, 09:02

Look up Adam762 here on the board. He is in Zanesville.

If you need a northern guy--- www.defensivecreations.com His name is Dave Laubert and he is in Alliance.

or

Glen Riddle his user ID here is '187'. Glen is in Youngstown area.

All good guys I have worked with in the past.

Mason · February 13, 2007, 10:02

I'm a little south right on the Ohio River. I'd be happy to help you out.

I didn't know Adam762 was in Zanesville! That's less than an hour away!

smokinhydes1 · February 13, 2007, 11:57

I appreciate it! I am hoping someone a little closer will be available, I'm clear over by Dayton & Springfield area. If not, then a road trip it will be. Any of you OGCA members? If so I could meet at a show.

smokinhydes1 · February 13, 2007, 12:01

Well, to his credit the guy called and says he wants me to send it to DSA & he's paying everything....rare guy who'll step up on auctions these days. But I would still like to know of somebody closer to home just because of all this hoopla over the selector switch marks and the BATFE. Even Jeff at DSA says to keep your lower, they don't even want to know......sounds like another thread I've been reading on here....hhmmmm

Rifleman 7.62 NATO · February 13, 2007, 12:53

Glen Riddle, AKA, 187 here on the files, does top notch work. Well worth the road trip IMHO.

TWCustoms · February 13, 2007, 20:13

Yeah, Mason, we're up here. Have a 400M range about ten minutes away, too.

C'mon up anytime.

Thanks for the mention, Rick.

Mason · February 13, 2007, 22:27

I'm not an OGCA member, but my father is and I attend all of the shows regularly. They are never too big on FALs and related parts, but I've picked up mags, a lower receiver, etc. If he can make it, I'm meeting up with Ricketts at the March show. You're welcome to join us, meet my father and younger brother, we'll eat at Max and Erma's. Adam, it'd be sweet if I could meet you.

My favorite guy up there is the machinist dude. I talked with him for a good half an hour. He was a machinist for like 50 years and is now retired, selling all of his stuff. I would offer to buy all three tables of his stuff if the funds would allow.

I'd love to have all those mics, calipers, surface guages, feelers, check blocks, lathe dogs, vises, indicators, mill bits, lathe bits, chucks, etc. One day...

smokinhydes1 · February 14, 2007, 06:36

I would love to meet like minded people at that show, you're right about some of the stares of horror when you walk in with a black rifle or an underfolder sometimes! You all want to set up a time and place to meet at the show? I can go either day.

**Ricketts** · February 14, 2007, 09:23

Looks like I won;t be at OGCA this turn. BIG auction in eastern PA that has my name written all over it--

February 13, 2007, 07:48	#1
smokinhydes1 Registered FALaholic #: 24246 Join Date: Jan 2007 Location: central Ohio Posts: 93	Any Central Ohio FAL 'smiths? I picked up an FAL off GB that was misrepresented & needs some work. Barrel clock position is way off, and I suspect a headspace issue...bottoms of cases expand on firing & extractor can't yank them out. Any help? __________________ If you're unsure, open fire...the friendlys will fall over dead & the rest are enemy.

February 13, 2007, 09:02	#2
Ricketts Old Fart Silver Contributor FALaholic #: 3418 Join Date: Jun 2001 Location: NE Ohio Posts: 7,036	Look up Adam762 here on the board. He is in Zanesville. If you need a northern guy--- www.defensivecreations.com His name is Dave Laubert and he is in Alliance. or Glen Riddle his user ID here is '187'. Glen is in Youngstown area. All good guys I have worked with in the past. __________________ "You should have come with a warning label." My daughters boyfriend to her!!

February 13, 2007, 10:02	#3
Mason Registered FALaholic #: 18674 Join Date: Nov 2005 Location: West Virginia Posts: 2,073	I'm a little south right on the Ohio River. I'd be happy to help you out. I didn't know Adam762 was in Zanesville! That's less than an hour away! __________________ "The only honorable response to violence is counter-violence." To Ride, Shoot Straight, and Speak the Truth, Jeff Cooper

February 13, 2007, 11:57	#4
smokinhydes1 Registered FALaholic #: 24246 Join Date: Jan 2007 Location: central Ohio Posts: 93	I appreciate it! I am hoping someone a little closer will be available, I'm clear over by Dayton & Springfield area. If not, then a road trip it will be. Any of you OGCA members? If so I could meet at a show. __________________ If you're unsure, open fire...the friendlys will fall over dead & the rest are enemy.

February 13, 2007, 12:01	#5
smokinhydes1 Registered FALaholic #: 24246 Join Date: Jan 2007 Location: central Ohio Posts: 93	Well, to his credit the guy called and says he wants me to send it to DSA & he's paying everything....rare guy who'll step up on auctions these days. But I would still like to know of somebody closer to home just because of all this hoopla over the selector switch marks and the BATFE. Even Jeff at DSA says to keep your lower, they don't even want to know......sounds like another thread I've been reading on here....hhmmmm __________________ If you're unsure, open fire...the friendlys will fall over dead & the rest are enemy.

February 13, 2007, 12:53	#6
Rifleman 7.62 NATO Registered FALaholic #: 13569 Join Date: Feb 2004 Location: Ohio Posts: 555	Glen Riddle, AKA, 187 here on the files, does top notch work. Well worth the road trip IMHO.

February 13, 2007, 20:13	#7
TWCustoms New Member FALaholic #: 24603 Join Date: Jan 2007 Location: Zanesville Ohio Posts: 22	ohio Yeah, Mason, we're up here. Have a 400M range about ten minutes away, too. C'mon up anytime. Thanks for the mention, Rick.

February 13, 2007, 22:27	#8
Mason Registered FALaholic #: 18674 Join Date: Nov 2005 Location: West Virginia Posts: 2,073	I'm not an OGCA member, but my father is and I attend all of the shows regularly. They are never too big on FALs and related parts, but I've picked up mags, a lower receiver, etc. If he can make it, I'm meeting up with Ricketts at the March show. You're welcome to join us, meet my father and younger brother, we'll eat at Max and Erma's. Adam, it'd be sweet if I could meet you. My favorite guy up there is the machinist dude. I talked with him for a good half an hour. He was a machinist for like 50 years and is now retired, selling all of his stuff. I would offer to buy all three tables of his stuff if the funds would allow. I'd love to have all those mics, calipers, surface guages, feelers, check blocks, lathe dogs, vises, indicators, mill bits, lathe bits, chucks, etc. One day... __________________ "The only honorable response to violence is counter-violence." To Ride, Shoot Straight, and Speak the Truth, Jeff Cooper

February 14, 2007, 06:36	#9
smokinhydes1 Registered FALaholic #: 24246 Join Date: Jan 2007 Location: central Ohio Posts: 93	I would love to meet like minded people at that show, you're right about some of the stares of horror when you walk in with a black rifle or an underfolder sometimes! You all want to set up a time and place to meet at the show? I can go either day. __________________ If you're unsure, open fire...the friendlys will fall over dead & the rest are enemy.

February 14, 2007, 09:23	#10
Ricketts Old Fart Silver Contributor FALaholic #: 3418 Join Date: Jun 2001 Location: NE Ohio Posts: 7,036	Looks like I won;t be at OGCA this turn. BIG auction in eastern PA that has my name written all over it-- __________________ "You should have come with a warning label." My daughters boyfriend to her!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode