View Single Post
Old December 12, 2012, 06:18   #13
evan price
evan price's Avatar
FALaholic #: 20480
Join Date: Jul 2006
Location: THE source for Ohio CCW =>
Posts: 2,587
Brownell's Oxpho-Blue.

Works best if you put the cleaned, degreased, de-oiled part in an oven at about 250 for long enough that the Oxpho-blue sizzles when it touches the metal.

When I chop down shotgun barrels I use the propane torch to heat up the muzzle before I hit it with the Oxpho-blue.

Then you need to oil the blued part well and let it soak in. Again, warm parts open the pores of the metal to receive the oil better.
Ohio's best CCW resource!
evan price is offline   Reply With Quote