The FAL Files

The FAL Files (http://www.falfiles.com/forums/index.php)
-   The Daewoo Files (http://www.falfiles.com/forums/forumdisplay.php?f=156)
-   -   DR-200 Pistol Grips In Stock - 3 styles (http://www.falfiles.com/forums/showthread.php?t=279196)

s0b3 January 02, 2010 00:23

DR-200 Pistol Grips In Stock - 3 styles
 
Guys,

I have a few of each style in stock now.

$40 for the original
$45 for the moldeded hk style
$45 for the skinny style

$6 priority mail shipping/$3 first class shipping, add $1 for the hardware.

Skinny Grip, HK Style Molded Grip, Factory Grip
http://i1113.photobucket.com/albums/...3/DSC03067.jpg
http://i1113.photobucket.com/albums/...3/DSC03068.jpg


pics of them on my rifle. since i had to mount them one at a time, i didn't have any way to compare them at the same time but they all felt good.

skinny grip, if you like AK grips, you'll like this one.

http://i55.tinypic.com/2l9p4y8.jpg

hk style grip, i actually liked this one. only for right handed shooters but it felt good. if you're an hk rifle fan, you'll like this one.

http://i55.tinypic.com/fmoer.jpg

original style. it was kinda weird going back to it after playing with the other too. i definitely notice the wider bottom more after playing with the other two.

http://i54.tinypic.com/103zoft.jpg

mp January 02, 2010 00:49

Count me in for one...

I have an original K1 grip if he needs the outer profile. Inside stuff is different on DR-200 grip.

jeepinjoe January 02, 2010 01:35

PG
 
Count me in for two.

s0b3 January 02, 2010 03:18

Quote:

Originally posted by mp
Count me in for one...

I have an original K1 grip if he needs the outer profile. Inside stuff is different on DR-200 grip.

cool i have a spare dr-200 grip i'm going to send him to copy. i have an early one without the text on the grip.

IronSkegge January 02, 2010 04:24

I will take one.

N4KVE January 02, 2010 10:45

I need 1. GARY N4KVE

littlehoot January 02, 2010 13:57

i'd be in

powerfreak January 02, 2010 15:42

Interest in DR-200 Pistol Grips - Ace alternative
 
count me in to

aussiedave January 02, 2010 20:51

put me down for 2 please.

aardq January 04, 2010 01:35

Put me in for 2 please.
Dan

frtyfivsevnty January 04, 2010 11:28

I'd be in for at least one.

johnny January 05, 2010 07:37

id take one

jeepinjoe January 05, 2010 22:30

Curious
 
Just a curious question s0b3, what is the minimum that the molder will do a run? Thanks Joe:D

s0b3 January 06, 2010 00:26

Re: Curious
 
Quote:

Originally posted by jeepinjoe
Just a curious question s0b3, what is the minimum that the molder will do a run? Thanks Joe:D
he won't entertain anything less than 20. if we can get a commitment for 15-18, i'll place the order. i'll sell the spares on gunbroker for people who need them but aren't members here.

we probably don't have enough interest to get an order larger than 20 so it doesn't look like we'll get a price break either.

jeepinjoe January 06, 2010 00:57

Would you mind if I go to other websites such as DRP, Uzitalk, Valmet.org, etc. to see if anybody else would be willing to get in the deal or just direct them here. Joe

s0b3 January 06, 2010 04:01

Quote:

Originally posted by jeepinjoe
Would you mind if I go to other websites such as DRP, Uzitalk, Valmet.org, etc. to see if anybody else would be willing to get in the deal or just direct them here. Joe
sure thing. i posted on DRP already but they don't get much traffic. appreciate it.

jeepinjoe January 07, 2010 22:10

s0b3, I placed a message on the DR200 yahoo group and a couple of people showed interest in the group buy. Hopefully more people get on board on a good deal. Joe

s0b3 January 07, 2010 22:33

Quote:

Originally posted by jeepinjoe
s0b3, I placed a message on the DR200 yahoo group and a couple of people showed interest in the group buy. Hopefully more people get on board on a good deal. Joe
awesome. thanks.

h8pvmnt January 08, 2010 09:20

I am a long time member here but seldom post, got the heads up on this from the DR200 Yahoogroups which i moderate. I really dont like the new offereing from Ace so please Count me in for 2.

MW In AZ

chefbeef January 08, 2010 10:13

I'll take one please.

Thanks,
Craig

s0b3 January 09, 2010 22:27

good news guys. i sent my original off for the mold. there's enough interest for the molder to do a run. i'll post pics once i get them back. i tried to get a price break but the next price break point was at 50 or 100 units, i can't put that kind of money up front not knowing when these will sell.

everyone on this list will have one to their name and i should have a few extras for anyone that didn't see this thread or on other forums.

calsdad January 10, 2010 09:12

Count me in for two.

I have a DR200 and a DR300 coming my way I will want to put pistol grips on.

Biotech January 10, 2010 09:23

Ill take 1.

moses January 11, 2010 10:13

I definitely want at least one!

br82722 January 11, 2010 11:14

I'll take one! Thanks for getting this done, s0b3.

billh1963 January 11, 2010 13:02

Sign me up for one...

moses January 11, 2010 16:49

Go ahead and change my order to 2 in case I ever buy another DR200

rosiesux January 12, 2010 11:50

daewoo grips
 
in for at least two thanks

Karash January 14, 2010 13:59

Hello,

I made my way over here from the Daewoo yahoo group. I would be interested in the old style pistol grip as well as long as it fits up well to the ACE stock kits. I just ordered from ACE with their new soft grips, but I highly doubt I will like it (anything is better than the thumbhole stock however).

My first post here.

-K

s0b3 January 14, 2010 20:22

mold is being created right now. these will be a little blacker than the ace ones. also the top of the grip wasn't quite square so that'll be cleaned up.

molder said i should have them within 3 weeks. keep your fingers crossed. in the past i've had to deal with a lot of delays in getting custom runs done.

looks like this thread attracted a few more woo fans over to this site. welcome, hope you guys stick around a bit.

calsdad January 14, 2010 20:40

I just picked up a DR-300 tonite (brand new - still had the oil rope in the barrel) , and I have a DR-200 coming shortly. They will sit next to the MaxII I already sitting down in the safe.

The 200 and the 300 both have the thumbhole stocks - so I was hoping to swap your pistol grips onto them and get rid of the thumbhole stocks.

s0b3 January 14, 2010 21:40

Quote:

Originally posted by calsdad
I just picked up a DR-300 tonite (brand new - still had the oil rope in the barrel) , and I have a DR-200 coming shortly. They will sit next to the MaxII I already sitting down in the safe.

The 200 and the 300 both have the thumbhole stocks - so I was hoping to swap your pistol grips onto them and get rid of the thumbhole stocks.

i'll put you down for 2.

shortround January 14, 2010 22:08

I'll take one.

calsdad January 14, 2010 23:01

Quote:

i'll put you down for 2.
I'm in for two already in an earlier post.

Thanks!

calsdad January 14, 2010 23:03

Just to be clear - I only need two total , not four.

jeepinjoe January 15, 2010 00:14

Hey s0b3, Just want to give many thanks for taking the lead on this. I really don't like my pistol grip that I made for my Daewoo DR200 out of a galil pistol grip, even though it fits tight, just doesn't flow like the original. Joe

s0b3 January 15, 2010 02:26

Quote:

Originally posted by calsdad
Just to be clear - I only need two total , not four.
10-4

s0b3 January 15, 2010 02:29

Quote:

Originally posted by jeepinjoe
Hey s0b3, Just want to give many thanks for taking the lead on this. I really don't like my pistol grip that I made for my Daewoo DR200 out of a galil pistol grip, even though it fits tight, just doesn't flow like the original. Joe
no problem. we're a small community and it's amazing the ripple effect the ace shortage caused. being such a small market, it's easy to ignore. i'm just glad i found someone who would take on a small project and do it for a "reasonable" price. i would have loved to get them the same price that ace offered them at but since this guy has to make the mold from scratch, costs are higher. heck with all the calls we've been putting into ace, if making the mold was cheap and easy they would have put that back into production already. it would have been a lot cheaper than what they are doing now which is redesign it and modify an ar15 grip.

i'll order a few spares just in case someone comes in on this late or doesn't know about it yet. thanks for spreading the word on the other sites.

looking forward to getting the product in my hand and posting pics. i expect a really nice looking product.

FatCat January 15, 2010 10:09

Woo Grip
 
Aw heck put me down for 2.
:D

N4KVE January 15, 2010 18:02

Hopefully, these pistol grips will fit with the Storm Werkz rear buttstock adaptor like the Ace pistol grips did, correct? GARY N4KVE

s0b3 January 15, 2010 18:31

Quote:

Originally posted by N4KVE
Hopefully, these pistol grips will fit with the Storm Werkz rear buttstock adaptor like the Ace pistol grips did, correct? GARY N4KVE
dimensions are based off the ace grip so i don't see any reason why it won't fit.

N4KVE January 16, 2010 01:18

Quote:

Originally posted by s0b3


dimensions are based off the ace grip so i don't see any reason why it won't fit.

Great. Thanks. GARY N4KVE

Berd January 21, 2010 22:18

I would be interested in one.

littlehoot January 22, 2010 10:26

any idea on pricing yet?

s0b3 January 22, 2010 15:05

Quote:

Originally posted by littlehoot
any idea on pricing yet?
if i can get the order to 50, i can get it down to $35. if we can't it'll be $40.

StormWerkz January 22, 2010 19:07

I will take one

br82722 January 22, 2010 20:58

Ace should be in for a few. That way they could deliver what their customers' ordered (and waited for).:rofl:

StormWerkz January 22, 2010 21:21

Quote:

Originally posted by br82722
Ace should be in for a few. That way they could deliver what their customers' ordered (and waited for).:rofl:
Damn ! just blew Coke out my nose !

ftierson January 22, 2010 22:21

Quote:

Originally posted by StormWerkz
Damn ! just blew Coke out my nose !
:)

Yup...

Forrest

littlehoot January 22, 2010 22:42

if you can get to 50, i'll take another


All times are GMT -5. The time now is 15:29.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
©1998-2018 The FAL Files