View Full Version : Tapco hammer, trigger, sear sets????
January 08, 2003, 19:37
Are they worth the 20 bucks or should I spend the 55 and get them from moses
January 08, 2003, 22:08
Do a search as there are many informative discussions on this very topic.
If you like to save money and don't mind sanding or filing to fit, the Tapco's are a good deal. At a minimum you will need to sand down the sides of the sear to fit the trigger, sand or file the rear of the sear to engage the notch in the trigger, ream or drill out the trigger and hammer pin holes.
If you build 10 kits you have saved enough on the H/T/S to buy a nice STG kit or 3 Imbel or G1 kits.
January 08, 2003, 23:19
Spend to money on the F.S.E. H/T/S they go right in with no problems. Get the latest series (M3) the avoid the problem of the hammer following the bolt on the second round.
January 09, 2003, 02:27
Go with FSE.
They are very good parts, and you won't have to worry bout them.
vBulletin® v3.8.7, Copyright ©2000-2013, vBulletin Solutions, Inc.