PDA

View Full Version : Ident/Aussie: Onyx Arms?


themercantile
November 06, 2002, 16:43
I have a Isreali FAL imported by onyx arms and i need information on it. It has a flash surpressor that is about 5 inches long and has ridges. The gun also has a bi pod built on that is colapsable. the number on the upper and lower do not match but there is no other name on the lower. Not sure what i have any information would be appreciated such as value and when it was made pics are available if needed. thanks

EMDII
November 06, 2002, 16:48
These three threads contain some info about Onyx (http://www.falfiles.com/forums/search.php?s=&action=showresults&searchid=87509&sortby=lastpost&sortorder=descending). Look into these and see what you find. There are other threads, outside FAQ.

EMDII
November 06, 2002, 16:50
These are ALL the threads (including yours) having "Onyx" in the Title. (http://www.falfiles.com/forums/search.php?s=&action=showresults&searchid=87510&sortby=lastpost&sortorder=descending)

DK
November 06, 2002, 17:07
Onyx FAL's were made in Isreal. Your's sounds like it was mixed-n-matched. Light barrel Izzies didn't have bipods, should have wooden handguards w/ metal heat shields, and the flashider you describe sounds more like an StG58 "Stoll" device. Someone has de-flowered your rifle! :eek:

DK

Post a pic if you can and we can tell you more....

themercantile
November 06, 2002, 18:57
the upper does have SBL isreal on the side if that helps any