PDA

View Full Version : L1A1 Magazine Question....


K. Funk
March 01, 2017, 19:50
Will metric followers/floorplates work with an inch mag body?

Thanks,

krf

tdb59
March 01, 2017, 20:02
Followers, probably.

Floorplates, no.

FAL floorplate locks inside bottom mag rails.

L1A1 floorplate locks outside the bottom mag rails, and uses a fixing plate on the spring.



....

K. Funk
March 01, 2017, 21:26
Is the fixing plate integral to the floor plate, or a separate piece??

Thanks,

krf

tobinb
March 01, 2017, 21:41
It's a separate piece. It "attaches" to the bottom of the spring and also has a raised "pin" that locks into a hole in the floorplate.

Pluribus
March 02, 2017, 00:03
Metric followers will work in a Commonwealth mag body but, won't fix to the inch spring in the same manner as the inch/inch. It is inconsequential though and, will work just fine or, if it makes you feel better, use a metric spring with the metric follower in the inch mag body.

:)