PDA

View Full Version : Suppressor adapter G1 ?


John Crusher
April 05, 2016, 17:54
I'm thinking about getting a can and was wondering if there is any maker who has an adapter for a G1 ? I like the simplicity of the flash hider and thought then it would be a simple on/off deal. John

ratas calientes
April 10, 2016, 14:09
You mean it attaches the same way as the G1 removable flash hider? I have never seen anything like that.

notfrommt
April 10, 2016, 15:08
That would be recipe for a baffle strike with most suppressors made these days.

tac-40
April 10, 2016, 15:28
The Gemtech Sandstorm uses a double lug QD system. Insert the suppressor onto the barrel adapter and turn turn to lock. Probably others out there with something similar.

http://www.gem-tech.com/store/pc/catalog/quicksand_a_745_general.gif

Trypcil
April 10, 2016, 18:18
Or adapt a G1 flash hider to accept a flashlight or fuel filter - perhaps!

stimpsonjcat
April 11, 2016, 15:33
That would be recipe for a baffle strike with most suppressors made these days.

I agree.

For a can the attachement method needs to be centered on the bore.

I would hesitate to even trust a threaded end on a FAL bbl...especially if it had been shortened.