PDA

View Full Version : I like it


jam762
March 12, 2015, 19:35
Buttstock options for the DR200 are...well...butthole or Ace tube.

Unless...You make your own hacked redneck adapter...
http://i1327.photobucket.com/albums/u680/jam556/6A7385B1-07AE-4917-B370-3DD6D8C02F2C-16196-00001F865D7D0A19_zps658d8d1a.jpg

LYCAN
March 12, 2015, 20:11
it's got character

Stoney
March 12, 2015, 23:58
me like

jam762
March 13, 2015, 07:11
Cheek weld is soo much better than the tube ACE stock, LOP is about 15 1/4".

ScottV parkerized the adapter and associated parts, it's almost a perfect match in color. GP sold me the lower for the price of shipping, sight filler came from tedg, & I'd like to thank all of them...again.

Here's a pic of the cuts made to make this work. I drilled the locking latch hole out to 1/2" & cut a piece of 1/2" steel round stock to provide the material for the mounting screw. I drilled through the 1/2" rod and drove a roll pin in where the solid pin goes in to retain the locking latch. The recoil plate was trimmed and reprofiled to match the lower receiver better.
http://i1327.photobucket.com/albums/u680/jam556/3838357E-83CE-4B4D-BAD4-76D2F20B3DA3-16196-00001F86D2878680_zpsae850f54.jpg

A recess was drilled in the side of the 1/2" round stock to accommodate the stud on the take down lever that activates the locking latch. I used the takedown lever for aesthetics, it has no function other than filling the holes.
http://i1327.photobucket.com/albums/u680/jam556/35CA211C-05E9-4CB2-88EF-C9786A563579-16196-0000208FE74AA9FE_zpsaaab4ca6.jpg

lostmybearing
March 13, 2015, 07:37
Excellent work. It's got a great look.

jam762
March 15, 2015, 19:26
Thanks fellas! I'm hoping to get it out next weekend to see how she actually feels & shoots. She feels much better than the Ace tubes & butthole.

vandal968 made an adapter a couple of years back for the Woo but I guess there wasn't enough interest at that time to make a run of them. I know that I'd be interested in one of them if he would make a run of 20 or so. If not, I'll probably make another one using an Indian lower with a imbel buttstock and pistol grip for my other Woo.

Here's a link to vandal968's thread. Maybe we can get enough people to make it worth his time.

http://www.falfiles.com/forums/showthread.php?t=328251

Pluribus
March 16, 2015, 00:27
Not pretty but, still quite likeable in its own way. With the woods character it's just charming as all get out.

Did this project start out as a moment in time where you looked at it, pre mod and said; What can I do with this thing? Is someone still holding your beer? :wink:

I'm just kidding, I do like it. Nice work.

:bow:

canes173
March 16, 2015, 17:36
The wood hg and pg would look sweet with the tube stock, I kinda dig the wood stock too. What did you do to attach the hg's?

jam762
March 16, 2015, 18:54
The wood hg and pg would look sweet with the tube stock, I kinda dig the wood stock too. What did you do to attach the hg's?

There is a thread on the HGs...
http://www.falfiles.com/forums/showthread.php?t=381025

I'm not really a fan of the tube stocks. I still have one on my other Woo but want to change that too. It might look cool but not practical as far as I'm concerned.

As far as the PG goes, I put a Ace PG beside the L1A1 grip and traced angle. Then cut & milled it to fit to the lower.

homelandprotector
March 22, 2015, 12:20
Buttstock options for the DR200 are...well...butthole or Ace tube.

Unless...You make your own hacked redneck adapter...
http://i1327.photobucket.com/albums/u680/jam556/6A7385B1-07AE-4917-B370-3DD6D8C02F2C-16196-00001F865D7D0A19_zps658d8d1a.jpg
That is absolutely the coolest Daewoo I have ever seen. Very good choice.

If you want to sell it let me know. :bow::bow::]

jam762
March 23, 2015, 08:30
Thanks fellas...she felt great at the range yesterday.