PDA

View Full Version : G3 Stock I.D 2 drift pin grommet and 1 large grommet


open ear shooter
December 19, 2014, 01:41
im not new to HK G3/PTR 91 ive owned one many years ago i just dont know anything about them (ignorant) there's a stock that i seldom see on the internet but don't what its called in the HK Community ! its sling loop delete and has three grommet holes 1 large and 2 for the drift pins !
anyone know what they are referred to as and where i should be looking to buy a excellent condition black stock !! similar to:
http://www.northridgeinc.com/store/index.cfm/c215/i1632

cheers lee

seasmoke
December 19, 2014, 06:18
Looks like a standard G3 butt stock. Sling loop is on the other side in pic shown. 3 holes for 'pins' , two for the back-plate and one for the swing down lower. All should be the same size. Condition is luck of the draw as with all surplus. Check link

http://www.robertrtg.com/store/pc/BLACK-BUTTSTOCK-SURPLUS-HKG3-25p90.htm

open ear shooter
December 19, 2014, 06:45
i think ive found that its for the G3A2 (sling mount delete my imagination)

21HK
December 19, 2014, 12:29
i think ive found that its for the G3A2 (sling mount delete my imagination)

It is for the G3, the prefix following designates the configuration its in.
G3A2= fixed stock
G3A3= collapsible stock

The three push pin holes in the stock your talking about are for the large pins, lower housings and handguards use a small pushpin. No idea why they used three unless it was to hold a spare.
A photo from the 12th Edition of Small Arms of the World by Edward Ezell confirms this was used on the Swedish G3 or AK4 as they refer to it.

http://i58.tinypic.com/29cnzo2.jpg

SAFN49
December 19, 2014, 12:51
The third hole is for the lowers front push pin? I don't have one of these 3 hole stocks but is it possible the front hole is for a small pin?

Lee Carpentieri
December 19, 2014, 13:45
Black with HK is Normally for Law Enforcemment, Green would be for Military.

SAFN49
December 19, 2014, 16:00
How many total colors were made? I know of

Black
OD Green
Jungle Green
Iranian Brown
Saudi Tan

SAAF Green and reportedly Medium Tan also

I'm sure I am forgetting a color or 2.

21HK
December 19, 2014, 16:00
They are all for the large push pins.

Large pin in front hole.
http://i57.tinypic.com/1tlvg7.jpg

http://i59.tinypic.com/68hhs6.jpg

Small pin in front hole.
http://i62.tinypic.com/25amcyc.jpg

http://i59.tinypic.com/35n8xmo.jpg

SAFN49
December 19, 2014, 16:26
It just hit me!

It's for the adjustable cheek riser. It's on the clubfoot and PSG stocks too.

21HK
December 19, 2014, 18:28
The stock in question does not have provisions for an adjustable cheek riser nor does the club foot stock. The SG1 stock is similar in shape and has the cheek riser but no third pin hole. There are also two guide holes that run top to bottom for the riser...you can see them at the bottom of the stock in the first photo.

SG1
http://i59.tinypic.com/20syts3.jpg

Club foot
http://i57.tinypic.com/10pdrus.jpg

SAFN49
December 19, 2014, 19:19
I was thinking this cheek riser but the front hole does not have the metal insert. Now I have no idea why they put the extra one in the stock.

http://i148.photobucket.com/albums/s30/djm540idjm540i/PSG1_zps535d5807.jpg (http://s148.photobucket.com/user/djm540idjm540i/media/PSG1_zps535d5807.jpg.html)