PDA

View Full Version : Savage Axis 300BLKOUT integral suppressor


TCustoms
April 12, 2014, 19:57
300BLKOUT Integrally suppressed - YouTube (http://youtu.be/1b-jq81nsmk)


My first one. I'm pretty stoked, it can be a little better I think but I have nothing to compare it to so I don't know.
Savage Axis re barreled, cut barrel down to 9". Axis has an barrel nut at the receiver, I threaded the barrel nut and cut matching threads in the 1.250 ID tube. OAL is 16.25 " and the blast baffle is ported to send gasses backwards first. There is a stack of K baffles filling in the rest.

I R&D everything in Aluminum and them make the final version in SS.

Merl
April 13, 2014, 18:33
Which is the permanently fixed part to get OAL>16? The baffles connected to the muzzle or the outer shell connected back at the nut?
(or is it both a SBR and a silencer?)

TCustoms
April 13, 2014, 20:24
It is a single stamp gun. Suppressor only. Non serviceable by the consumer. It doesn't need to be though but should it get damaged, it can be disassembled and repaired.

TCustoms
May 29, 2014, 21:52
Louisiana's Gov. just signed into law the ability to hunt everything with suppressors.

Time to get off my backside and finish this thing.