PDA

View Full Version : New life for an old friend


Door Kicker
March 03, 2013, 23:01
http://img.photobucket.com/albums/v338/DoorKicker/Daewoo/DR200_zpsb4e5a289.jpg

http://img.photobucket.com/albums/v338/DoorKicker/Daewoo/DR100_zps1684d5b2.jpg

http://img.photobucket.com/albums/v338/DoorKicker/Daewoo/Magpul-Woo_zps450452f4.jpg

http://img.photobucket.com/albums/v338/DoorKicker/Daewoo/Magpul-Woo1_zpsebc5143c.jpg

http://img.photobucket.com/albums/v338/DoorKicker/Daewoo/NewDR100_zpsd4a725b6.jpg

http://img.photobucket.com/albums/v338/DoorKicker/Daewoo/New-Woo_zps4d9ffe2c.jpg

http://img.photobucket.com/albums/v338/DoorKicker/Daewoo/PistolGrip_zpsac0cce23.jpg

http://img.photobucket.com/albums/v338/DoorKicker/Daewoo/Bayo-Woo_zps975d5f71.jpg

Door Kicker
March 03, 2013, 23:04
went a little different route with my DR200 conversion. I already have a Max1 with the wire tele stock so I decided to go with a hard stock on the DR200 and go for a DR100 look (Minus the folder)

Also instead of cutting the barrel down I decided to just thread it and add the bayo lug

What do yall think? Still going to add the rail system when they are available

s0b3
March 04, 2013, 01:33
nice mod on the bayo lug. did you chop one off an ar15 fsb and weld it on? what fixed stock is that?

Door Kicker
March 04, 2013, 09:02
http://img.photobucket.com/albums/v338/DoorKicker/bayonetlugclamp_zpse74b3f56.jpg

Used a grinder on one of these and welded it on. The stock is a Magpul MOE rifle stock, I think it kinda looks like the AR100 stock...

oz in SC
March 04, 2013, 23:28
Cool looking and different.

s0b3
March 04, 2013, 23:37
http://img.photobucket.com/albums/v338/DoorKicker/bayonetlugclamp_zpse74b3f56.jpg

Used a grinder on one of these and welded it on. The stock is a Magpul MOE rifle stock, I think it kinda looks like the AR100 stock...

the Sully Stock looks nice on a woo. and it's pretty heavy giving the rifle a good balance.

dsertdog56
March 05, 2013, 17:45
Looks great!

Door Kicker
March 06, 2013, 00:15
thanks guys, very happy with the way it turned out

aardq
March 06, 2013, 01:14
Good job! :biggrin: I'll bet that most people won't realize the bayo stud isn't factory. Give yourself a pat on the back!

Dan