View Full Version : SIG P250 slide hang up cure.

Redneck Rob
February 16, 2012, 19:01
I've had this happen nine out of the eleven times I've taken the slide off. When I replace the slide on the grip housing the slide would not come back to the lock back spot. I spotted the problem today. The recoil guide/spring was cocked off just a hair to the left side and a hair high. And I mean just a hair. When centered, it goes back on like it should. I then took off the slide ten times and every time it was the same thing. I even moved the guide/spring assy around to see if it had a flat spot, but I didn't see one. I changed the barrels and had the same happen. This thing must be tight inside.
So if any of yall get one, remember this little trick.