PDA

View Full Version : Tanfoglio firing pin and block reinstallation, need help


HankC
February 19, 2011, 09:55
Take out firing pin of my Tanfoglio to polish the block and cleaning. It is very difficult to put it back. Any trick? It is an Armscore Rock Islanland MAP1, 9mm. Should be the same as EAA Witness. The flat side of the pin should be facing top of the slide to position the notch on the pin to the right facing the block correct? I have a hard time to get the pin pass the block. Thanks.

dwarmbrodt
February 19, 2011, 11:47
Try here, go down to the youtube video and see if it helps you..... around 5:05

http://www.czforumsite.info/index.php?topic=32454.0

HankC
February 19, 2011, 13:14
Found a Yutube video on Witness. Exactly the same gun. I had the flat side wrong. Should face ejector instead of top side. The picture on manual look like facing top. Got it done now. Thanks.
http://www.youtube.com/watch?v=_gZ1io1ZiuQ

jerrymrc
March 02, 2011, 20:21
Some videos are here. http://www.henningshootsguns.com/tech/tech.tanfoglio.main.html