PDA

View Full Version : Breeching washer


jbgw
January 11, 2009, 21:38
I had to make one which turned out to be thicker than usual (.036) because the barrel which came with a kit I bought had been turned back way too far.
What is the proper inside diameter and outside diameter for these washers?

Falfegnügen
January 12, 2009, 00:23
I'm going to bed right now, too late and cold to head to the shop. If you don't have the answer by tommorow afternoon, I'll measure some for you when I get home from work. Just send me a PM to remind me. I got to measure some barrels anyway for another thread.

the gman
January 12, 2009, 14:13
Internal 1.00", external 1.20".

jbgw
January 12, 2009, 14:19
Thank you for the reply. Mine has an internal diameter of .96 but that is because I threaded the washer before I started filing it down.