PDA

View Full Version : Whats it worth?


denny
December 28, 2008, 23:36
Nice !!! Devine TX M1A 16XX serial range - all GI pts.
ART 2 M1A /M14 scope - The mount is specifically for the M1A/M14s. 98% finish.
No hard case or bag - Clip guide with mount.
Thanks D.

2barearms
December 29, 2008, 08:03
If it's not a NM and the barrel is original and very low TE it would
start at around $2,500. I've seen scopes advertised at around
$1,200 and up. There are too many ARTII rebuilds for my taste out
there and not being an expert on them I wouldn't give more than
$500 for one. The M40 version that is anodized green would be
a completely different story. It may bring more than that to the
right buyer.

Ssarge
December 29, 2008, 19:34
If the rifle is an actual Devine in minty shape, it alone should bring around $3k.
(is the barrel marked Devine, TX)?
Add the value of the scope and mount to that. I would check it out on The Firing Line M14 forum if I were you.
http://www.m14tfl.com/upload/forumdisplay.php?f=117

denny
December 29, 2008, 19:47
The barrel is marked Devine TX and the Art is that Pretty Greenish finish.
Unfortunately the stock is GI M14 and not a T44 Configuration.
Thanks D.