PDA

View Full Version : Ident/furniture: stock length- compiled measurements


W.E.G.
July 22, 2001, 11:52
If you have numbers, post 'em here.

W.E.G.
July 22, 2001, 11:53
Let's start with this.

(cut-and-paste from gunsmithing fourm)

Aifwikir
Member


FALoholic # 2187
posted February 24, 2001 21:42
--------------------------------------------------------------------------------
My Ironwood stock is 9.5" from the front of the metal ferrel to the inside of the rubber butt pad. 10 3/8" counting the butt pad. This is a full 1 1/4" shorter than my hump back R1 plastic stock. I like the shorter stock myself.